MAXimator Expander - shield for the MAXimator set

3-channel constant current LED driver module, RoHS

RGB color control board based on STP04CM05, STM, RoHS

Module with RGB LED, adapted to operate with a voltage of 5 V. Ideal for applications such as decorative lighting, visual effects or microcontroller projects

Shield for MAXimator set, 4-digit 7-segment LED display, 2 RGB type WS2812B diodes, STLM20 temperature sensor, two buttons

COM-13716

The PicoBuck LED Driver is an economical and easy to use driver that will allow you to control and blend three different LEDs on three different channels. By default, each channel is driven at 330mA; that current can be reduced by either presenting an analog voltage or a PWM signal to the board. COM-13705

I2C LED driver chip has the ability to PWM each individual LED in a 16x9 grid. Adafruit 2946

KAmodPCA9533 is a module with LED driver from NXP. The module allows you to control the brightness of 4 LEDs using programmable PWM signals (with a frequency from 0.591 Hz to 152 Hz). I2C interface. The board is equipped with a Pmod I2C standard connector and a KAMAMI connector

RGB LED strip controller with an infrared receiver. Enables remote control of multi-colored strips with diodes type 3528 and 5050 powered with voltage of 12 V using an IR remote control

RGB LED strip controller with WiFi communication. It enables remote control of multi-colored strips with diodes powered with voltage from 5V to 28V using a mobile application. SL-LC01

Single-color LED strip driver. It allows you to control strips with LEDs powered with voltage from 12 to 24 V using built-in buttons

Universal driver for DC and LED motors. It can work with a supply voltage from 5 V to 24 V and a load up to 10 A. DFRobot DRI0050

WiFi controller dedicated to LED strips based on addressed diodes, including the popular WS2812, WS2813 and WS2815. SP108E

Controller with 5 m RGB LED strip (10 LEDs per meter). The LEDs are mounted on a flexible white PCB. Communication is via the Grove interface. Seeed Studio 104020005

Module with RGB diode and P9813 controller. It is powered with the voltage of 5 V and controlled by the I2C interface (Grove). Seeed Studio 104030006

Module with LED driver. It can control LED strips with a length of 1 to 2 meters at a voltage of 9 V or from 1 to 5 meters at a voltage of 12 V. Seeed Studio 105020002