Gravity: LTR390 UV Light Sensor module
ID: 1185009
5906623407538
zł60.80
Tax included
zł49.43 tax excl.
LTR390-UV UV light sensor module. Allows measurement of ultraviolet and visible light intensity. Equipped with a Gravity connector, it communicates via an I2C or UART interface. DFRobot SEN0540
Description
LTR390-UV UV light sensor module. It allows the measurement of ultraviolet and visible light intensity. The sensor features high sensitivity, fast response and small size for easy integration into other devices. The chip has a built-in ADC. In addition, the user has a configurable intensity threshold output at which an interrupt is generated. The module is powered by 3.3 V to 5 V and communication is via an I2C or UART interface (Gravity connector). Full documentation is available on the product page.
Features
- LTR390-UV-01 sensor for ultraviolet and visible light measurement
- Built-in ADC
- Light intensity value output via I2C bus or UART
- I2C address 0x53
- Interrupt output, programmable upper/lower threshold
- No calibration required
- UV response wavelength: 280nm to 430nm
- ALS spectral response wavelength: 450nm to 700nm
- Power supply: 3.3 V to 5 V
- Current consumption: 2.73 mA
- Dimensions: 32 x 27 mm
Kit contains
- Gravity: LTR390 UV Light Sensor
- Gravity-4P I2C/UART cable
1185009
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Available
Expansion board for Arduino, allows easy connection of XBee modules, has separate outputs for I2C, SPI and UART buses. The built-in 3.3V voltage stabilizer and operating mode switch make it easier to program the Arduino when the XBee module is connected to the sockets. DFRobot DFR0265
zł21.65
24h
Available quantity: 3
Available
Gravity: IO Expansion & Motor Driver Shield is an Arduino compatible expansion board that provides digital I / O ports, analog I2C, SPI and UART interfaces, as well as a DC motor driver. DFRobot DFR0502
zł65.65
24h
Available quantity: 3
Available
Other products in the same category (16)
Grove module with a proximity sensor, light, color and the ability to detect gestures. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 101020580
zł87.58
24h
Available quantity: 6
Available
Compact expansion with advanced data monitoring features, equipped with temperature, humidity, light sensors and RTC clock. With low power consumption, battery monitoring function and I2C protocol support, it is ideal for long-term battery-powered projects, offering precise measurements and efficient power management. Seeed Studio 114993446
zł46.70
24h
Available quantity: 5
Available
Color sensor equipped with the OPT4048 sensor from Texas Instruments. It allows you to determine the characteristics of ambient light by measuring parameters such as light intensity, color in the CIE XY, LUV coordinate systems, as well as color temperature. The module is equipped with Qwiic connectors. SparkFun SEN-22639
zł56.01
3 weeks
No product available!
The module allows the measurement of lighting in the vicinity of the sensor. The measuring range is from 1 to 65535 LUX, and communication takes place using the I2C bus. DFRobot SEN0097
zł30.95
24h
Available quantity: 3
Available
Module with light intensity sensor LTR-303. It offers a measuring range from 1 to 65535 lux and a 16-bit resolution. Communication takes place using I2C. Adafruit 5610
zł28.39
24h
Available quantity: 6
Available
Module with a light sensor (photoresistor) designed for M5Stack sets. An analog output and a digital output have been led out on the Grove connector. M5Stack U021
zł22.90
24h
Available quantity: 2
Available
Color Sensor, complete color detector
zł50.02
24h
Available quantity: 4
Available
Module with ultraviolet (UV) sensor based on the GUVA-S12D system. It allows measurement of radiation with a wavelength in the range from 240 to 370 nm. The module has a connector in accordance with the Grove standard. Seeed Studio 101020043
zł54.30
24h
Available quantity: 1
Available
Ambient light sensor housed in a transparent hemisphere and waterproof housing. It supports a detection range of 0 to 65535 lux and communicates via an I2C interface. DFRobot SEN0562
zł40.79
24h
Available quantity: 4
Available
Module with an analog TEMT6000 light intensity sensor. The output voltage increases with the intensity of the incident light. The sensor is powered with the voltage of 5 V
zł6.90
24h
Available quantity: 18
Available
Module with a UV light sensor LTR390-UV. It allows you to measure the intensity of ultraviolet radiation and visible light. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4831
zł24.55
24h
Available quantity: 8
Available
Gravity: High Accuracy is a multifunctional environmental sensor with Gravity I2C and UART output. Perfect for weather station projects. DFRobot SEN0501
zł136.36
24h
Available quantity: 1
Available
Precise sensor measuring UV radiation in the range of 240 to 370 nm, directly outputting UV index value (0-11) and hazard level (1-5). Thanks to I2C and UART interface support and compact design, it is ideal for environmental monitoring, health protection and optimization of photovoltaic installations. DFRobot SEN0636
zł53.12
24h
Available quantity: 3
Available
Gravity: I2C VEML7700 Ambient Light. Sensor SKU. SEN0228
zł51.72
4 weeks
No product available!
A module with a light sensor in the form of a photoresistor. There is a comparator and a potentiometer on the board. The module has a digital output
zł4.61
24h
Available quantity: 13
Available
Precision XYZ color and light sensor with I2C interface. Measures light intensity and color components, features STEMMA QT / Qwiic connectors. Adafruit 6335
zł50.09
24h
Available quantity: 2
Available
LTR390-UV UV light sensor module. Allows measurement of ultraviolet and visible light intensity. Equipped with a Gravity connector, it communicates via an I2C or UART interface. DFRobot SEN0540