TTGO T-Beam V1.1 - IoT development board with ESP32 and LoRa 868MHz module
ID: 584211
5906623461448
zł255.85
Tax included
zł208.01 tax excl.
Development board designed for IoT projects. It is equipped with a WiFi/Bluetooth module ESP32, LoRa 868 MHz, GPS and a basket for a Li-Ion 18650 battery. TTGO T-Beam V1.1
Description
A development board designed for IoT projects, equipped with a WiFi/Bluetooth ESP32 module with a 3D antenna and a LoRa communication module operating at 868 MHz. In addition, the board has GPS NEO-6M with a positioning accuracy of up to 3 m. On the bottom of the board there is a basket for a Li-Ion type 18650 battery, which is managed by a circuit with the TP5400 system, which allows you to charge the batteries with a current of up to 1 A. This selection of components and small dimensions make the board ideally suited to the design of devices in the area of the Internet of Things.
Features
- ESP32
- WiFi and Bluetooth communication
- 4 MB Flash
- 4 MB PSRAM
- Antenna
- LoRa
- Frequency band: 868 MHz
- Transmit power: + 20dbm
- Reception sensitivity:
- 139dBm @ LoRa and 62.5Khz and SF = 12 and 146bps
- 136dBm @ LoRa and 125Khz and SF = 12 and 293bps
- 118dBm @ LoRa and 125Khz and SF = 6 and 9380bps
- 123dBm @ FSK and 5Khz and 1.2kb / s
- FIFO 64 B
- Data transfer rate: 1.2K ~ 300kb/s @ FSK, 0.018K ~ 37.5kb/s @ LoRa
- Modulation Mode: FSK, GFSK, MSK, GMSK, LoRa TM, OOK
- Interface: SPI
- Automatic frequency correction
- Automatic gain control
- Operating voltage: 1.8 to 3.7V
- Current consumption: up to 120 mA
- GPS NEO-6M
- Interface: UART (baudrate 9600)
- Receiving band: L1 (1575.42MHz)
- Positioning accuracy: 3 m
- Drift: <0.02 m/s
- Reference system: WGS-84
- Maximum altitude: 18,000 m
- Maximum speed: 515 m/s
- Acceleration: <4g
- Tracking sensitivity: -161 dBm
- Acquisition sensitivity: -148 dBm
- Average "cold start" time: 38 seconds
- Average "warm start" time 35 seconds
- Hotstart time: 1 sec
- Average recovery time: 0.1 seconds
- Ceramic antenna
- Working voltage: 3 to 5V
- Li-Ion 1 A battery charging circuit
- Charging status LEDs
- MicroUSB connector
Kit contains
- TTGO T-Beam V1.1 module
- 868 MHz antenna
- 2 x straight goldpin 13-pin connector
584211
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Development board designed for IoT projects. It is equipped with a WiFi/Bluetooth module ESP32, LoRa 433 MHz, GPS and a basket for a Li-Ion 18650 battery. TTGO T-Beam V1.2
zł245.39
Delivery date unknown
No product available!
Development kit with ESP32 WiFi and Bluetooth module and 0.96 "OLED display. It has a built-in Li-Pol charger module and a USB-UART converter function. ModOLEDESP32_V2.0_TTGO
zł90.49
24h
Available quantity: 9
Available
Li-Ion battery type 18650 with a nominal voltage of 3.7 V and a capacity of 2500 mAh. Samsung INR18650-25R
zł23.99
24h
Available quantity: 54
Available
Other products in the same category (16)
Compact and energy-efficient Meshtastic node designed for mobile field applications, integrating a LoRa module (862-930 MHz), L76K GPS and nRF52840 microcontroller. The device offers a ready-to-use, no-programming, power supply from USB-C, solar panel or battery, and a 1.3" OLED display for real-time monitoring. With Bluetooth 5.0 connectivity, Grove interface and support for multiple navigation systems, it is a reliable tool for building decentralized mesh networks, monitoring location and expanding IoT projects. Seeed Studio 114993648
zł152.84
4 weeks
No product available!
A compact ESP32-S3-based LoRa transceiver offering stable field communication without the need for a cellular network. The device comes pre-installed with Meshtastic, a 1.3" OLED display, and an SX1262 transceiver supporting the EU868 MHz band. A built-in 1000 mAh battery ensures long battery life, while Bluetooth and USB-C support simplify setup and everyday use. The Elecrow ThinkNode M2 Walkie-Talkie Mini
zł208.21
Delivery date unknown
No product available!
Expansion board with LoRa Node SX1262 module dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. Waveshare SX1262 868/915M LoRaWAN HAT
zł68.27
24h
Available quantity: 8
Available
HAT module with RFM95W 868 MHz system for LoRa/LoRaWAN communication and OLED display, designed for Raspberry Pi minicomputers. Adafruit 4074
zł197.59
24h
Available quantity: 1
Available
LoraSX1278 radio module operating in the 433 MHz band, using LoRa technology for long-range wireless data transmission, ideal for IoT applications requiring stable and reliable communication. It enables bidirectional transmission with a frame acknowledgement mechanism and connects to microcontrollers via the SPI interface, which facilitates integration with platforms such as Arduino. Thanks to high sensitivity (-148 dBm), transmitter power up to +20 dBm and support for various modulations, the module provides flexibility and efficiency in various applications.
zł25.69
4 weeks
No product available!
Function module designed for MicroMod boards. It allows you to add LoRa and LoRaWAN wireless communication in the 915 MHz frequency band to the project. SparkFun DEV-18573
zł245.27
24h
Available quantity: 1
Available
LoRa module operating at 433 MHz frequency band with built-in RP2040 microcontroller, CH340 USB to UART converter, 74HC125V voltage level converter. SB Components 23233
zł389.92
24h
Available quantity: 3
Available
Expansion board with LoRaWAN SX1303 and GNSS L76B dedicated to the Raspberry Pi. The kit includes the 868M antenna, GPS and cables. Waveshare SX1303 868M LoRaWAN Gateway HAT
zł479.63
4 weeks
No product available!
The expansion board with the LoRa SX1262 module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. Waveshare Pico-LoRa-SX1262-868M
zł64.59
24h
Available quantity: 1
Available
LoRa module based on Semtech SX1262 chip, supporting 868/915 MHz band and providing stable operation thanks to the use of TCXO. It is characterized by transmit power up to 22 dBm, receiver sensitivity -136.73 dBm and low power consumption, which makes it ideal for battery-powered IoT devices. Seeed Studio 114993390
zł28.41
4 weeks
No product available!
Core1262-HF is an advanced LoRa module operating in the 850–930 MHz band, combining high energy efficiency, strong transmission power, and interference resistance. With support for LoRa/LoRaWAN standards and available development resources, it is ideal for use in industrial automation, smart home systems, and Sub-GHz IoT projects.
zł30.34
24h
Available quantity: 50
Available
A single-channel IoT gateway operating in the 868 MHz band, designed for building and testing long-range LoRaWAN networks. Based on the ESP32 WROOM-32 microcontroller, the device offers WiFi and Ethernet connectivity and works with the RA-01H radio module, providing communication distances of up to approximately 1.5 km outdoors. The gateway supports the LoRaWAN 1.0.3 standard and is compatible with The Things Network platform, enabling easy cloud integration. It features a built-in color TFT display, USB-C power supply, and an acrylic enclosure.
zł149.90
24h
Available quantity: 3
Available
A LoRa wireless communication module dedicated to long-distance data transfer. It operates in the 433 MHz frequency band and is equipped with a USB interface. Waveshare USB-TO-LoRa-LF-B
zł78.98
24h
Available quantity: 2
Available
Compact and energy-efficient Meshtastic node designed for mobile field applications, integrating a LoRa module (862-930 MHz), L76K GPS and nRF52840 microcontroller. The device offers ready-to-go operation without programming, powered by USB-C, solar panel or battery. With Bluetooth 5.0 connectivity, Grove interface and support for multiple navigation systems, it proves to be a reliable tool for building decentralized mesh networks, monitoring location and expanding IoT projects. Seeed Studio 114993653
zł137.43
4 weeks
No product available!
Module with the SX1276 868 MHz system for LoRa communication, designed for FireBeetle boards. It communicates via the SPI interface. DFRobot TEL0125
zł132.29
24h
Available quantity: 1
Available
LoRa module with RP2040 microcontroller. It uses the SX1262 chip, ensuring reliable long-distance communication in the frequency range from 850 to 930 MHz. Included with a USB Type-C adapter. Waveshare RP2040-LoRa-HF-Kit
zł57.07
4 weeks
No product available!
Development board designed for IoT projects. It is equipped with a WiFi/Bluetooth module ESP32, LoRa 868 MHz, GPS and a basket for a Li-Ion 18650 battery. TTGO T-Beam V1.1