

zł1,442.70 tax excl.
Advanced electronic compass module that precisely calculates direction to within a few degrees, and its tilt compensation allows operation in difficult environmental conditions. The module is easy to use and allows to obtain measurement data via I2C interface at 5 Hz. SparkFun SEN-12916
The HMC6343 is a fully integrated, high-quality electronic compass module that calculates and provides direction with an accuracy of a few degrees. It is tilt-compensated and calibrated to operate in the presence of magnetic interference. With this board, using the HMC6343 module is exceptionally easy. Simply connect the power supply and the I2C interfaces to the microcontroller to enable the module to receive commands and transmit data to the user.
The HMC6343 integrated circuit combines 3-axis magnetoresistive sensors, 3-axis MEMS accelerometers, analog and digital circuitry, a microprocessor, and built-in software algorithms necessary for direction calculations. The module requires a power supply voltage of 3.3V with a current consumption of 4.5mA and can measure and calculate direction every 200ms (5Hz).
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
No product available!
Board with the ATmega328 microcontroller from the AVR family, there are 20 I/O lines, 6 PWM channels, 6 analog inputs at the user\'s disposal. SparkFun DEV-15123
Base board compatible with Arduino. It was equipped with an ATmega328P microcontroller. It has 22 I / O lines (including 6 PWM channels) and 8 analog inputs and a Qwiic connector. SparkFun DEV-18158
Module with TLV493D 3-axis magnetic field sensor. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4366
A module with a magnet sensor that allows you to detect the presence of an object emitting a magnetic field in the environment. The module is supplied with the voltage ranging from 3.3 V to 5 V and has a digital output. DFrobot DFR0033
Module with 3-axis magnetometer MAG3110, I2C, RoHS
Module with a 3-axis magnetic field sensor MMC5603. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5579
A small module with a 3-axis magnetometer based on the Melexis MLX90393 system. Its resolution is 0.161 μT. I2C or SPI interface is used for communication. The I2C interface has been derived on connectors compatible with the Qwiic standard. SparkFun SEN-14571
No product available!
Pololu - 2737
PmodCMPS2 is a module with a digital magnetometer based on the Memsic MMC34160PJ system. It has a resolution of 0.5 mG (within ± 16) and accuracy up to 1 °. For communication with the module, an I2C interface is provided on the 6-pin Pmod connector. Digilent 410-355
No product available!
Module with a 3-axis magnetometer based on the MLX90393 system. It has a measuring range from ± 5mT to ± 50mT and a resolution of 0.161 µT. The I2C or SPI interface is used for communication. Adafruit 4022
Precise 3-axis compass based on FlipCore and TMR technology, offering magnetic field measurement in the range of ±2000μT without the need for calibration. With I3C support, sampling rate up to 400 Hz and Field Shock Recovery function, it is perfect for navigation systems, AR/VR, drones and autonomous vehicles. DFRobot SEN0619
Precise Hall effect sensor that converts magnetic field intensity into analog voltage. Differential response to magnetic poles (voltage increases when approaching S pole and decreases at N pole) enables precise analysis of field direction and strength. High sensitivity, low noise and compatibility with platforms such as Arduino and micro:bit make the sensor ideal for industrial, educational and hobby applications. DFRobot DFR1132
KAmodMAG3110FC is a module with magnetic field sensor MAG3110FC from NXP. The sensor measures the magnetic field in the range of ±1000μT, with a resolution of 0.1μT. Communication with the sensor is realized via the I2C interface. The board is equipped with the Pmod I2C standard connector and the KAMAMI connector. Kamami KAmodMAG3110FC
Module with a 3-axis magnetometer based on the BMM150 system. It communicates via the I2C or SPI interface. DFRobot SEN0419
Module with a 3-axis magnetometer based on the BMM150 chip. It communicates via an I2C or SPI interface. Waveshare BMM150 3-Axis Magnetometer Sensor
The GY‑271 module with HMC5883L sensor is a precise digital compass offering three-axis magnetic field measurement, I²C communication, and 3 V–5 V operation. Suitable for robotics, navigation, and embedded systems requiring low power consumption and a compact form factor. GY‑271
Module with a 3-axis magnetometer BMM150. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020492
Module with 3-axis digital compass, HMC5983, I2C, SPI, RoHS
Advanced electronic compass module that precisely calculates direction to within a few degrees, and its tilt compensation allows operation in difficult environmental conditions. The module is easy to use and allows to obtain measurement data via I2C interface at 5 Hz. SparkFun SEN-12916