High-Precision AD HAT - module with 32-bit ADC converter for Raspberry Pi
ID: 583762
5906623439515
zł171.25
Tax included
zł139.23 tax excl.
Module with a 10-channel ADC ADS1263 converter with a resolution of 32-bits designed to work with the minicomputer Raspberry Pi and Jetson Nano. Waveshare High-Precision AD HAT
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Module with a 10-channel ADC ADS1263 converter with a resolution of 32-bits designed to work with the minicomputer Raspberry Pi and Jetson Nano. It enables the measurement of voltage in the range from -2.5 V to 2.5 V (differential inputs) or from 0 to 5 V with high precision and low noise level. The chip offers a sampling rate of 38.4 kSPS, uses a built-in 24-bit auxiliary ADC and an internal test signal. The board has connectors compatible with Waveshare sensors and a connector with screw terminals. The module is controlled by the SPI interface, which is available on a 40-pin connector compatible with Raspberry Pi and on a 10-pin connector that allows communication with other evaluation kits. Full documentation with examples is available on the Wiki website.
| 1. Raspberry Pi GPIO header | 7. ADC ground reference configuration |
| 2. AD input (screw terminal) | 8. 7.3728M crystal |
| 3. AD input (header) | 9. Power supply section |
| 4. Control input (header) | 10. RTD section |
| 5. Power configuration resistor | 11. Input filtering |
| 6. RTD configuration resistor | 12. ADS1263 |
Features
- ADS1263 chip
- 10 channels
- 32-bit resolution
- Sampling rate 38.4 kSPS
- Input voltage: -2.5V to 2.5V or 0 to 5V
- Low noise level
- Built-in 24 bit auxiliary ADC
- Internal ADC test signal, IDAC, internal reference voltage 2.5V
- 8 x GPIO multiplexing, PGA (32 times)
- Built-in AD connector input, compatible with Waveshare sensor pinout
- Built-in input with AD screw terminals
- Built-in control connector (facilitates the module control by other boards)
- Three-wire RTD circuit, started by soldering a 0R resistor
- SPI interface
- Dimensions: 65 x 30.5 mm
Kit contains
- High-Precision AD HAT module
- Set of screws
583762
Data sheet
- Compatible with
- Raspberry Pi 5/4/3/2/1 A/B, Zero/Zero 2 H/WH
You might also like
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU chip and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has a DDR4 4GB RAM memory. NVIDIA Jetson Nano Development Kit rev. B01 945-13450-0000-100
Delivery date unknown
No product available!
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł221.40
24h
Available quantity: 149
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł265.90
24h
Available quantity: 34
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł362.90
24h
Available quantity: 97
Available
Other products in the same category (11)
HAT MCC 152 module for Raspberry Pi. It provides 2 analog outputs with a resolution of 12 bits and a range of 0-5 V and 8 digital inputs/outputs. Digilent 6069-410-003
zł1,030.91
4 weeks
No product available!
HAT MCC 128 module for Raspberry Pi. Provides 8 analog inputs with a resolution of 16 bits, sampling rates up to 100 kS/s and a range of +/-10 V, +/-5 V, +/-2 V, or +/-1 V. Digilent 6069-410-001
zł967.90
4 weeks
No product available!
No product available!
HAT MCC 172 module for Raspberry Pi. Provides 2 inputs with 24 bit resolution for IEPE sensors such as accelerometer and microphone. Two coaxial cables are included. Measurement Computing MCC 172
zł2,903.96
4 weeks
No product available!
3-channel voltage and current monitoring module designed to work with the Raspberry Pi. It can measure voltage ranging from 0 to 26 V and voltage ± 3.2 A. SB Components 20805
zł95.05
24h
Available quantity: 3
Available
HAT MCC 134 module for Raspberry Pi. Provides 4 inputs with a resolution of 24 bits dedicated to thermocouples type J, K, R, S, T, N, E or B. Digilent 6069-410-002
zł1,030.91
4 weeks
No product available!
HAT MCC 172 module for Raspberry Pi. Provides 2 inputs with 24 bit resolution for IEPE sensors such as accelerometers and microphones. Digilent 6069-410-004
zł2,764.60
4 weeks
No product available!
Module with ADC 16-bit converter for Raspberry Pi Zero / Zero W / 2B / 3B / 3B + with I2C communication interface.
zł28.24
24h
Available quantity: 3
Available
A 4-channel power parameter monitoring module dedicated to Raspberry Pi minicomputers. Allows voltage, current and power monitoring via I2C or SMBus. Waveshare Current/Power Monitor HAT
zł144.57
4 weeks
No product available!
Raspberry Pi Expansion Board, Miscellaneous Components, All-in-One, Waveshare
zł151.13
24h
Available quantity: 3
Available
HAT module with MCC 118 chip, designed for Raspberry Pi. Provides 8 analog inputs with a resolution of 12 bits, sampling rates up to 100 kS/s and range +/-10 V. Digilent 6069-410-000
zł574.10
24h
Available quantity: 3
Available
Module with a 10-channel ADC ADS1263 converter with a resolution of 32-bits designed to work with the minicomputer Raspberry Pi and Jetson Nano. Waveshare High-Precision AD HAT