

zł12.31 tax excl.
This SPST solid-state relay module allows for safe switching of DC circuits up to 60 V and 7 A, offering galvanic isolation and low conduction resistance (approx. 30 mΩ) thanks to the use of back-to-back MOSFET transistors. It features fast switching time (up to 1 ms), low control current consumption (approx. 10 mA), and the ability to control a signal from 2.7 to 40 V. Its compact design, lack of mechanical components, and the ability to mount on 2.54 mm connectors or screw terminals make the module a durable and quiet solution for systems requiring reliable isolation and long service life. Pololu 5420
The solid-state relay (SSR) module, SPST type, is a modern solution designed for switching DC circuits on and off based on a control signal in the range of 2.7 to 40 V. Thanks to galvanic isolation between the control circuit and the output, it is safe and resistant to interference. Switching is handled by two back-to-back MOSFET transistors, providing bidirectional current flow and symmetrical output, allowing the module to be used as either a high-side or low-side switch. This version supports currents up to 7 A at voltages up to 60 V, and the total ON-state resistance is about 30 mΩ, minimizing energy losses. The switching time (on and off) is a maximum of 1 ms, ensuring a fast response in most applications.
Thanks to its solid-state design, the module eliminates typical drawbacks of mechanical relays, such as contact wear, sparking, and noise, while offering a compact form factor and silent operation. The control circuit consumes up to 10 mA and can be powered and activated through a single connection (by shorting EN and VIN). The signal pins have a 2.54 mm pitch, making it easy to use with breadboards, while the output provides solder pads for wires or the option to connect 3.5 mm or 5 mm screw terminals. The module has a small size and weight, making it ideal for projects with limited space. It is perfect for power switching in systems requiring signal isolation, as well as for hobby and professional applications where reliability and long life are critical.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Pin header goldpin black 1x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.
2-pin ARK mounting strip, 3.5 mm pitch. 381-3.5-02P-14-00AH. Set of 10 pieces
This SPST solid-state relay module allows for safe switching of DC circuits up to 30 V and 11 A, offering galvanic isolation and low conduction resistance (approx. 30 mΩ) thanks to the use of back-to-back MOSFET transistors. It features fast switching time (up to 1 ms), low control current consumption (approx. 10 mA), and the ability to control a signal from 2.7 to 40 V. Its compact design, lack of mechanical components, and the ability to mount on 2.54 mm connectors or screw terminals make the module a durable and quiet solution for systems requiring reliable insulation and long service life. Pololu 5421
No product available!
Module with 4 relays with a maximum switching current of 7 A. It communicates via the USB interface. Numato Lab RL40001
No product available!
Industrial Ethernet module that allows control of 30 relays via RJ45 port. It uses Modbus TCP protocol, PoE (Power over Ethernet) power supply and comes with a rail-mounted housing. Waveshare Modbus POE ETH Relay 30CH
No product available!
Power module with IRFR4105Z transistor (MOD-30.Z), maximum current 2A, 5V power supply or 5V - 12V range (selection by jumper)
No product available!
Industrial module with an Ethernet interface that allows you to control 8 relays via the RJ45 port. It uses Modbus TCP protocol, supports PoE (Power over Ethernet) and is equipped with a rail-mounted housing. Waveshare Modbus POE ETH Relay
Industrial module with 8 relays. It communicates via RS485 interface and supports Modbus RTU protocol. Waveshare Modbus RTU Relay (EN)
Module with 8 SSR relays with a load of up to 3 A. The board communicates via the Ethernet interface. Numato Lab 8ETHSSR001-AC
No product available!
Board with the WiFi ESP-12F (ESP8266) module and a 5 V relay. Equipped with an AC adapter
The module is ideal for applications requiring precise control and signal processing, with the ability to be easily controlled via Ethernet. Numato Lab NLETHGC016-HT
No product available!
Module with 2 relays 12 V with a load of up to 7 A. The board communicates via the Bluetooth wireless interface. Numato Lab BTRL002
The module is equipped with four 10A / 250VAC relays controlled independently via a serial bus (UART) or from a PC (through a microUSB connector). The NO / NC contacts of the relays have been led to the ARK screw terminals. ICSTATION ICSE012A
No product available!
Module with a 12 V relay and a timer. It allows you to turn the device on and off cyclically at a specified time using potentiometers. It can also operate in single trigger mode, which allows the device to be turned on after a signal has been applied for a specified period of time. The operating time can be adjusted from 1 s to 100 s or from 1 s to 15 min
Module with 4 relays with a maximum switching current of 7 A. Equipped with the ATmega328P microcontroller, it can be programmed in the Arduino IDE. Numato Lab PRLY002
Switch module with a maximum voltage of 40 V and a current of 10 A, based on a MOSFET transistor, HT0740 driver and I2C expander. It has a screw connection and a status LED. Pimoroni PIM455
Module with 8 relays SSR G3MC202P with a load up to 2 A. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 103020136
No product available!
The remotely controlled modulation module MOD-34 / AZ allows wireless load control with up to 10 A current consumption via a relay. It does not contain nRF24l01.
Module with 8 SSR relays with a load of up to 3 A. The board is equipped with the ULN2003 system and communicates via a digital interface. Numato Lab SSRC80001-DC
No product available!
This SPST solid-state relay module allows for safe switching of DC circuits up to 60 V and 7 A, offering galvanic isolation and low conduction resistance (approx. 30 mΩ) thanks to the use of back-to-back MOSFET transistors. It features fast switching time (up to 1 ms), low control current consumption (approx. 10 mA), and the ability to control a signal from 2.7 to 40 V. Its compact design, lack of mechanical components, and the ability to mount on 2.54 mm connectors or screw terminals make the module a durable and quiet solution for systems requiring reliable isolation and long service life. Pololu 5420