zł94.60 tax excl.
This industrial relay module, powered by the Raspberry Pi RP2350B microcontroller, features six 10A 250VAC/30VDC relays and an isolated RS485 interface. It ensures safe and stable operation thanks to opto-isolation, power isolation, and surge protection. It supports programming in C/C++, MicroPython, and the Arduino IDE, and the 40-pin Pico HAT connector allows for easy expansion. Its robust DIN housing and 7–36V DC power supply make it ideal for industrial automation and IoT projects. Waveshare 31790
Industrial 6-Channel RP2350 Relay is a high-quality industrial relay module based on the Raspberry Pi RP2350B microcontroller, designed for reliability, safety, and easy integration into automation systems. The device features a dual-core, dual-architecture design, allowing operation in ARM Cortex-M33 or Hazard3 RISC-V mode, providing developers with flexibility and programming freedom. The module includes six high-quality relays rated up to 10A at 250VAC / 30VDC, enabling direct control of 230V AC mains devices or low-voltage circuits. Built-in galvanic isolation circuits — including signal opto-isolation and power separation — ensure safe and stable operation even in demanding industrial environments. The module offers an isolated RS485 interface for Modbus RTU communication and a 40-pin Raspberry Pi Pico HAT-compatible connector, allowing easy expansion with additional modules (RTC, CAN, RS232, LoRa, sensors, etc.).

| 1. RP2350B Chip | 11. RS485 Bus Interface |
| 2. 40PIN Raspberry Pi Pico HAT Connector | 12. Power Terminal Block (DC 7–36V) |
| 3. Relay Terminal Blocks | 13. LED Indicators (PWR, RXD, TXD) |
| 4. Relays (≤10A 250V AC or ≤10A 30V DC) | 14. WS2812 RGB LED |
| 5. Optical Isolation Circuit (Optoisolator) | 15. USB Type-C Connector |
| 6. Power Isolation Module | 16. Passive Buzzer |
| 7. Digital Isolation Circuit | 17. RP2350 RESET Button |
| 8. TVS Diode | 18. RP2350 BOOT Button |
| 9. Overvoltage Protection | 19. Not present in this version |
| 10. RS485 Termination Resistor Jumper | — |
Power is supplied via screw terminals supporting voltages from 7V to 36V DC, allowing direct use in industrial environments. Additionally, the board includes a USB Type-C connector for communication, power, and programming via drag-and-drop. Built-in LED indicators — for power, RS485 transmission (TX/RX), and a configurable RGB LED — provide real-time system status monitoring. The robust ABS enclosure with DIN rail mounting ensures ease of installation and operational safety. The module supports programming in C/C++, MicroPython, and Arduino IDE, and provides a comprehensive SDK, documentation, and examples to streamline development. With its extensive protection features, industrial-grade performance, and reliable operation, the RP2350 Relay Module is ideal for building automation, device control, and IoT projects requiring high safety standards.
Data sheet
Manufacturer
Responsible person
Cable with USB typ A and USB typ C connectors, cable length 0.5 m. LANBERG
Cable with USB typ A and USB typ C connectors, cable length 1 m. LANBERG CA-USBO-10CC-0010-BK
Cable with USB typ A and USB typ C connectors, cable length 1,8 m. LANBERG CA-USBO-10CC-0018-BK
USB - RS232/RS485 converter with the original FT2132RNL chip. It uses a USB type A connector and a screw connector to connect RS232 and RS485 interfaces. Supports a wide range of operating systems: Mac, Linux, Android and Windows 11, 10, 8.1, 8, 7. Waveshare USB TO RS232/485
Iduino relay module with 2 channels and optoisolation, enabling control of loads up to 10 A at 250 V AC or 110 V DC. Powered by 5 V, it is ideally compatible with microcontrollers and development kits, providing safe and convenient circuit switching.
A versatile board for two SPDT "sugar cube" relays, allowing for easy control using 2.5-20V logic signals. Built-in BSS138K MOSFETs and LEDs indicating channel activation make the module ideal for use with Arduino and Raspberry Pi. The board supports 5V or 12V relays, and JST SH connectors and 5mm terminal holes ensure convenient connection. Pololu 5667
This module allows independent control of two Omron G5LE-14-DC12 SPDT relays, supporting currents up to 10A. Thanks to built-in BSS138K MOSFETs, it can be controlled directly from 3.3V or 5V development boards such as Arduino or Raspberry Pi. Each channel is equipped with an LED to indicate relay activation and 5mm screw terminals for convenient circuit connection. Pololu 5666
This module allows independent control of two Omron G5LE-14-DC5 SPDT relays, supporting currents up to 10A. Thanks to built-in BSS138K MOSFETs, it can be controlled directly from 3.3V or 5V development boards such as Arduino or Raspberry Pi. Each channel is equipped with an LED to indicate relay activation and 5mm screw terminals for convenient circuit connection. Pololu 5665
A compact board that allows for easy connection of a standard SPDT "sugar cube" relay in electronics projects. An integrated MOSFET transistor allows for relay control using a 2.5V to 20V logic signal, and two LEDs indicate its status. The module is equipped with a 3-pin JST SH connector and 5mm terminal holes for easy installation and integration with microcontrollers. Pololu 5664
A compact Omron G5LE-14-DC12 relay module that allows you to control loads up to 10 A with a coil voltage of 12 V. Thanks to the BSS138K MOSFET transistor, it can be activated by a 2.5 V to 20 V logic signal, facilitating interoperability with microcontrollers. The module is equipped with 5 mm screw terminals, a 3-pin JST SH connector, and LEDs to indicate operation. Pololu 5663
A compact relay module with an Omron G5LE-14-DC5 relay, capable of controlling loads up to 10 A with a 5 V coil voltage. Thanks to a BSS138K MOSFET transistor, it can be activated by a 2.5 V to 20 V logic signal, facilitating interoperability with microcontrollers. The module is equipped with 5 mm screw terminals, a 3-pin JST SH connector, and LEDs to indicate operation. Pololu 5662
Module Crowtail-SPDT Relay-V2.0 relay module enables controlling devices with high current consumption up to 30 A by means of 5 V logic signals. Intended for automation and control systems, it is used in home and industrial projects.
Crowtail-TPL5111 Reset Enable Timer is a module for energy-efficient power control of devices in battery-powered projects. It offers six programmable time intervals and an automatic reset mode, supporting the design of low-power circuits.
This XIAO ESP32-C6-based relay module is designed for intelligent automation. It allows independent control of six channels via Wi-Fi, Zigbee, Thread, or BLE, and thanks to the built-in ESPHome, it easily integrates with Home Assistant. It supports DC devices up to 30V, features two Grove ports for expansion, and comes in an aesthetically pleasing PLA enclosure. Ideal for IoT systems, home automation, lighting, and motor control. Seeed Studio 114993588
A power module for the Pimoroni Yukon platform that allows independent control of two high-current outputs within a voltage range of 5 to 17 V. Built-in diodes and chokes enable excellent handling of inductive loads such as pumps, fans, and solenoids. Each channel can also operate in PWM mode, allowing for smooth power regulation in slow-response devices. The module supports a total current of up to 15 A and includes temperature sensors and a "power good" signal. Pimoroni PIM692
Module equipped with 8 SPDT electromagnetic relays and 12 opto-isolated digital inputs controlled via the RS485 bus using the Modbus RTU protocol. The device enables remote control of loads up to 10 A at 250 V AC or 30 V DC, offering a galvanically isolated RS485 interface, surge protection and DIN 35 mm rail mounting. Configurable communication parameters and flexible power supply options facilitate integration with industrial and building automation systems. MODIG MD20004
Two-channel relay module equipped with optoisolated control inputs and relays with 5V coils. Designed for controlling loads up to 10A at 250VAC from a microcontroller or development platforms
Four-channel relay module equipped with optoisolated control inputs and JQC-3F relays with 5V coils. Designed for controlling loads up to 10A at 250VAC from a microcontroller or development platform
Industrial 6-channel relay module based on the RP2350 microcontroller, featuring an isolated RS485 interface, Pico HAT-compatible header, advanced isolation protection circuits, and integrated Wi-Fi and Bluetooth connectivity, designed for industrial automation and device control. Waveshare RP2350-Relay-6CH-W
No product available!
Module equipped with 12 SSR solid-state relays and 8 opto-isolated digital inputs controlled via the RS485 bus using the Modbus RTU protocol. The device enables switching of AC loads from 100-240 V AC with currents up to 2 A per channel, offering a galvanically isolated RS485 interface, surge protection and DIN 35 mm rail mounting. Configurable communication parameters and flexible power supply options facilitate integration with industrial and building automation systems. MODIG MD20003
This industrial relay module, powered by the Raspberry Pi RP2350B microcontroller, features six 10A 250VAC/30VDC relays and an isolated RS485 interface. It ensures safe and stable operation thanks to opto-isolation, power isolation, and surge protection. It supports programming in C/C++, MicroPython, and the Arduino IDE, and the 40-pin Pico HAT connector allows for easy expansion. Its robust DIN housing and 7–36V DC power supply make it ideal for industrial automation and IoT projects. Waveshare 31790