GPS module with L76K GNSS receiver. The chip can receive data from major positioning systems: GPS, GLONASS, Beidou (BDS) and QZSS. It features fast operation, high accuracy and low power consumption. The module has a 5-pin PH2.0 connector, and the board also features a socket with an MS621FE battery backing up voltage, which significantly speeds up the device's startup after a temporary power outage. The user can also connect an external antenna via the u.FL connector located on the board. Full documentation is available on the product page.

Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
STM32 Nucleo-64 development board with STM32L476RGT6 MCU, supports Arduino and ST morpho connectivity
NUCLEO series starter kit equipped with the STM32G491RE microcontroller (512 kB Flash, Cortex-M4), with a built-in programmer-debugger ST-Link-V3E, equipped with connectors compatible with Arduino. STMicroelectronics NUCLEO-G491RE
L76K GNSS receiver module. It can receive data from GPS, GLONASS, BDS and QZSS systems. It uses a UART interface and offers an accuracy of up to 2 meters. Waveshare L76K GPS Module
Compact and energy-efficient GNSS module that supports GPS, BeiDou, GLONASS and QZSS systems, offering precise positioning in applications such as robotics and asset tracking. With a built-in low-noise amplifier (LNA), acoustic filter (SAW) and support for 32 tracking channels, the module provides high sensitivity, low power consumption and fast localization, and allows easy integration with Seeed Studio XIAO boards. Seeed Studio 109100021
GNSS receiver module dedicated to Raspberry Pi minicomputers. It provides simultaneous reception of up to three types of satellite systems, including GNSS with GPS, Beidou, Galileo and GLONASS. Waveshare NEO-M8Q GNSS HAT
No product available!
GPS module with GNSS receiver ZED-F9P. It can receive data from GPS, GLONASS, Galileo and BeiDou systems. It has USB, UART, I2C and SPI interfaces. RTK and high accuracy up to 10 mm. SparkFun GPS-15136
No product available!
GNSS module with u-blox ZED-F9R system. It uses Automotive Dead Reckoning (ADR) technology. It provides highly accurate and continuous positioning by combining the 3D IMU sensor, vehicle dynamics model, correction data and GNSS measurements. SparkFun GPS-22693
No product available!
Function module designed for MicroMod boards. Equipped with the ZED-F9P GNSS receiver. The system can receive data from all major positioning systems: GPS, GLONASS, Galileo and BeiDou. It communicates via UART, I2C and SPI interfaces. SparkFun GPS-18378
No product available!
Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 868/915M LoRaWAN/GNSS HAT
The module is equipped with the LTE-M/NB-IoT u-blox SARA-R510M8S system. It allows you to monitor devices remotely. SparkFun GPS-18031
No product available!
Compact GPS locator in the shape of a credit card. Equipped with GPS, Bluetooth and Wi-Fi, it ensures smooth positioning both indoors and outdoors. It not only offers location tracking, but also monitors parameters such as temperature, brightness and movement. Seeed Studio 114993073
GNSS receiver to receive navigation signals from satellite navigation systems such as GPS and BeiDou. It offers positioning accuracy of up to 2 m. DFRobot TEL0157
No product available!
GPS module with NEO-M9N 92-channel GNSS receiver. The system can receive data from all major positioning systems: GPS, GLONASS, Galileo and BeiDou. It has UART, I2C and SPI interfaces. SparkFun GPS-17285
No product available!
Module with a GPS PA1010D receiver with a built-in ceramic antenna. It can download data from the most popular navigation systems: GPS, GLONASS, GALILEO. Pimoroni PIM525
A compact Meshtastic compatible device that combines LR1110, nRF52840 and Mediatek AG3335 GPS technologies for precise positioning and low power consumption. With IP65 waterproof, Bluetooth 5.0, Thread and Zigbee support and magnetic charging, it is ideal for outdoor activities and emergencies. Seeed Studio 114993369
A versatile platform for precise positioning and navigation, offering WiFi, Bluetooth, Ethernet and LTE connectivity, with an ESP32-WROVER processor and the ZED-F9P dual-band GNSS module from u-blox. It also includes a u-blox NEO-D9S module for L-Band reception and a LARA-R6001D module that provides global cellular connectivity when a nano SIM card is inserted. SparkFun GPS-24342
No product available!
L76K GNSS receiver module. It can receive data from GPS, GLONASS, BDS and QZSS systems. It uses a UART interface and offers an accuracy of up to 2 meters. Waveshare L76K GPS Module