The Connect Tech Rogue Carrier is the base board for NVIDIA Jetson AGX Xavier modules. The module offers four 4 Lane MIPI CSI-2 video inputs and 6 2 Lane MIPI CSI-2 inputs, NVMe M.2 Key M, two HDMI outputs, three USB 3.1 ports and two Ethernet (RJ-45) ports. The module is characterized by small dimensions and weight.
The NVIDIA Jetson AGX Xavier module is plugged into a dedicated connector from the bottom of the board. Thanks to this solution, the whole creates a compact and compact set ready for installation in the device.
Attention!
The kit does not include NVIDIA Jetson AGX Xavier modules. They must be purchased separately.Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Module with SoC chip containing eight 64-bit ARM v8.2 cores and a Volt graphic layout consisting of 512 cores supporting CUDA, cuDNN and TensorRT technology. NVIDIA Jetson AGX Xavier 900-82888-0000-000.
No product available!
Module with SoC system containing eight 64-bit ARM v8.2 cores and Volta graphic system consisting of 384 cores supporting CUDA, cuDNN and TensorRT technology. The system is supported by DDR4 RAM with a capacity of 8 GB, eMMC memory with a capacity of 32 GB. NVIDIA Jetson AGX Xavier 8GB 900-82888-0060-000.
No product available!
Starter Cable Kit for Rogue Carrier. Connect Tech CKG064
No product available!
Development kit with a processor featuring 12 ARM Cortex-A78AE v8.2 cores and an NVIDIA Ampere GPU comprising 2048 cores supporting CUDA technology. Nvidia 945-13730-0055-000
No product available!
Astro Carrier base plate attachment designed to work with the NVIDIA Jetson TX2i module. It has HDMI, USB 3.0 and USB 2.0, Ethernet as well as Mini PCIe and mSATA connectors. The overlay is plugged into the plate-to-board connector available on the Astro base plate. Connect Tech XBG206
No product available!
Base board for NVIDIA Jetson TX1, NVIDIA Jetson TX2 4GB or NVIDIA Jetson TX2i modules. It is equipped with an Ethernet connector, microSD, UART, I2C and GPIO interfaces, USB 2.0 OTG, USB 3.0 ports, 4-line MIPI (I-PEX), CAN, HDMI 2.0 connector and a 7-pin SATA connector. Connect Tech ASG016
No product available!
Starter Cable Kit for Rogue Carrier. Connect Tech CKG064
No product available!
Adapter for NVIDIA Jetson modules to connect the NVIDIA Jetson AGX Xavier module to the NVIDIA Jetson TX1, TX2 and TX2i carrier. Connect Tech AGX001
No product available!
Base board for NVIDIA Jetson AGX Xavier modules. Equipped with MIPI CSI-2, NVMe M.2 Key M, HDMI, USB 3.1, Ethernet (RJ-45), CAN Bus and power connector. Connect Tech AGX101
No product available!
A two-part metal case with a fan designed to build a set with Orbitty Carrier and NVIDIA Jetson TX1 or NVIDIA Jetson TX2. Connect Tech ENC001+XHG302
No product available!
Starter Cable Kit for Spacely Carrier. Connect Tech CKG045
No product available!
Base board for NVIDIA Jetson TX1, NVIDIA Jetson TX2 or NVIDIA Jetson TX2i modules. It is equipped with MIPI CSI-2 connector, USB OTG, UART and I2C. It is characterized by great possibilities with small tile dimensions. Connect Tech ASG008
No product available!
Starter Cable Kit for Astro Breakout Board. Connect Tech CKG041
No product available!
Base board for NVIDIA Jetson TX1, NVIDIA Jetson TX2 or NVIDIA Jetson TX2i modules. The board is equipped with a Mini PCI Express and mSATA connector, as well as a micro SD card slot. It is characterized by great possibilities with small tile dimensions. Connect Tech ASG001
No product available!
Kit for the construction of the intelligent JetBot robot based on Jetson Nano. It consists of a board (module with OLED display, battery basket and motor controller), expansion module with connectors, cameras with Sony IMX219 image sensor, motors, housing and a set of mounting screws. It is also equipped with a 2.4/5 GHz WiFi module and Bluetooth 4.2. Waveshare JetBot AI Kit Accesories
Case made of transparent plastic designed for Nvidia Jetson Nano. It protects the minicomputer against dust and mechanical damage. Waveshare Jetson Nano Case (A)
Dedicated cooling fan for NVIDIA Jetson Nano mini computers. Powered by 5V, controlled by PWM signal. Waveshare Fan-4020-PWM-5V
Set with camera and wide angle lens. The set is designed to work with the NVIDIA Jetson Nano computer. ArduCAM B0249
Universal case adapted to most popular single-board computers, incl. ODYSSEY-X86J4105, Raspberry Pi, BeagleBone, and Jetson Nano. Seeed Studio 114992152
10.1" LCD IPS display with touch screen. The display is equipped with HDMI interface for image display and USB for touch screen. High resolution 1024x600 pixels. Waveshare 10.1inch HDMI LCD (E)
Base board for NVIDIA Jetson AGX Xavier modules. Equipped with MIPI CSI-2, NVMe M.2 Key M, HDMI, USB 3.1, Ethernet (RJ-45), CAN Bus and power connector. Connect Tech AGX101