zł8.91
M5Stack Hall Effect Unit - module with Hall sensor A3144E
ID: 582029
zł39.90
Tax included
zł32.44 tax excl.
Module with three Hall sensors A3144E, which react to the failure of the magnet. It is powered with 5 V and has a digital output on the Grove connector. M5Stack U084
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
The M5Stack Hall Effect Unit is a module with three Hall sensors A3144E. It reacts to the proximity of a magnet with the S field from the top or the N field from the bottom of the housing. Using signals from three sensors connected to logic with AND gates makes the output signal very stable. At the output, the user has at his disposal a digital signal that is led out on the Grove connector. The module is supplied with 5 V, has a built-in 3.3 V stabilizer and a diode indicating the output status. The kit can be widely used in applications such as door alarm sensors, proximity sensors, or for speed measurement. Full documentation is available on the product page.
Features
- Digital output
- 3 x A3144E chip
- The logic of 74HC08D
- LED indicating output
- Grove connector
- Compatible with LEGO
- Housing: PC
- Power supply: 5V
- Dimensions: 24 x 32 x 8 mm
- Weight: 4 g
Kit contains
- Hall Effect Unit
- Grove cable 20 cm
- Magnet
582029
You might also like
M5Stack series development kit equipped with WiFi and Bluetooth ESP32 module. It will work in IoT-related projects, as a STEM educational module or in Smart Home devices. M5Stack K010
zł259.00
Delivery date unknown
No product available!
M5Stack series development kit equipped with ESP32. It will work in IoT-related projects, as a STEM educational module or in Smart Home devices. M5Stack K001
Delivery date unknown
No product available!
M5Stack series development kit equipped with ESP32 Pico. It will work in IoT-related projects or in "wearable" devices. M5Stack C008
zł47.90
24h
Available quantity: 4
Available
M5Stack series development kit equipped with ESP32 Pico. Equipped with a 5x5 RGB LED matrix, it will work in IoT-related projects or in "wearable" devices. M5Stack C008-B
zł84.89
24h
Available quantity: 3
Available
MEMS SPM1423 digital microphone module with PDM modulation. It communicates via the I2S interface. M5Stack U089
zł22.90
24h
Available quantity: 2
Available
Other products in the same category (16)
The module with a fingerprint sensor FPC1020A is designed for the M5Stack sets. The sensor has a built-in memory and can store up to 150 fingerprints. M5Stack U008
zł123.00
24h
Available quantity: 3
Available
M5Stack series kit equipped with ESP32 and camera with OV2640 sensor. It has a built-in W5500 chip and can be powered by the RJ45 (PoE) connector. M5Stack U121
zł269.00
24h
Available quantity: 1
Available
DC-DC Step-Down Converter ME3116AM6G with an output voltage of 5 V, input voltage from 6 to 24 V and a maximum output current of 1 A. Dedicated to the M5Stack modules. M5Stack U125
zł20.90
24h
Available quantity: 1
Available
5-port Hub with Grove connectors for M5Stack sets. It allows you to connect several devices with Grove connectors to the evaluation kit. M5Stack Grove-T
zł43.90
24h
Available quantity: 2
Available
Module with a 433 MHz radio receiver for M5Stack sets. Based on the SYN531R chip, it has a built-in PCB antenna. M5Stack U113
zł28.91
24h
Available quantity: 1
Available
ATOM Lite development kit complete with microSD card reader up to 16 GB. M5Stack K044
zł114.89
24h
Available quantity: 2
Available
6-port IO port expander for M5Stack kits. It is equipped with 6 Grove connectors, it is based on the ATmega328 microcontroller, which communicates via the I2C interface. M5Stack PbHUB Unit
zł67.90
24h
Available quantity: 2
Available
Prototype kit for use in industry. It includes a prototype board with an M-BUS connector, TTL-RS485 converter, connectors and a DIN rail. M5Stack Base26
zł109.00
24h
Available quantity: 1
Available
The module with 4 relays is designed for the M5Stack sets. It allows you to control devices with an operating voltage of up to 250 V AC and a current of up to 10 A or a voltage of 28 V DC and a current of 10 A. M5Stack U097
zł75.40
24h
Available quantity: 2
Available
A module with a rotary encoder and RGB LED lighting for M5Stack sets. It communicates via the I2C interface. M5Stack U135
zł52.90
24h
Available quantity: 3
Available
Voltmeter module for M5Stack sets. It can measure DC voltage in the range from 0 to 36 V with an accuracy of approx. 0.5 mV. M5Stack U087
zł126.90
24h
Available quantity: 1
Available
Module with gas sensor SGP30. It allows you to measure the content of total volatile organic compounds (TVOC), carbon dioxide equivalent (eCO2), ethanol and H2 in the air. M5Stack U088
zł74.89
24h
Available quantity: 2
Available
IO port expander for M5Stack kits. Equipped with 8 IO pins and power pins, it communicates via the I2C interface. M5Stack U011-B
zł41.91
24h
Available quantity: 2
Available
Ethernet MQTT communication module designed for M5Stack sets. It communicates via the UART interface using AT commands. M5Stack U129
zł179.00
24h
Available quantity: 2
Available
Module with a soil moisture sensor for the M5Stack sets. It has an analog output and a digital output with adjustable reaction threshold. M5Stack U019
zł23.90
24h
Available quantity: 3
Available
The module with 2 relays is designed for the M5Stack sets. It allows you to control devices with an operating voltage of up to 250 V AC and a current of up to 8 A or a voltage of 28 V DC and a current of 8 A. M5Stack U131
zł39.90
24h
Available quantity: 2
Available
Module with three Hall sensors A3144E, which react to the failure of the magnet. It is powered with 5 V and has a digital output on the Grove connector. M5Stack U084