![Pololu 1124 - 120:1 Mini Plastic Gearmotor 90-Degree 3mm D-Shaft Output Pololu 1124 - 120:1 Mini Plastic Gearmotor 90-Degree 3mm D-Shaft Output](https://kamami.pl/8064-large_default/1201-45v-mini-plastic-gear-motor-90-output-pololu-1124.jpg)
![Pololu 1124 - 120:1 Mini Plastic Gearmotor 90-Degree 3mm D-Shaft Output Pololu 1124 - 120:1 Mini Plastic Gearmotor 90-Degree 3mm D-Shaft Output](https://kamami.pl/8064-large_default/1201-45v-mini-plastic-gear-motor-90-output-pololu-1124.jpg)
zł17.93 tax excl.
A small motor with a plastic gear 120:1, the output shaft at an angle of 90° with a diameter of 3mm in the shape of the "D", operating voltage 4.5 V, current consumption from 0.08 A to 0.8 A, speed 120 RPM and maximum torque 1.4 kg*cm. Pololu 1124
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
A small motor with a plastic gear 120: 1 and a 90° output shaft with a diameter of 3 mm in the shape of the "D" letter. The recommended operating voltage of the motor is 4.5 V and at this voltage it reaches a speed of 120 RPM and a maximum torque of 1.4 kg*cm, consuming a current from 0.08 A to 0.8 A.
Our offer includes wheels suitable for motors with a shaft with a diameter of 3 mm and the shape of the letter "D". There are wheels of various diameters from 32 mm to 90 mm in many colors.
Suitable mounting brackets in low and high versions are available for the motors.
Also available are encoder kits for mounting on the motor shaft for use with holders.
Our offer includes a number of controllers that perfectly cooperate with the presented engines.
![]() |
![]() |
![]() |
Data sheet
A double motor driver that allows you to drive two DC motors with a voltage from 4.5 to 13.5V and a continuous current of 1 A per channel. It communicates via the serial interface. Pololu 1110
No product available!
Compact and complete robot controller, containing the ATmega328P AVR microcontroller (with 32 KB of Flash memory and 2 KB of RAM memory) and a two-channel DC motor driver. Pololu 1220
DRV8835 Dual Motor Driver Carrier
These tall brackets offer an easy and convenient mounting solution for mini plastic gearmotors.
These wide brackets offer an easy and convenient mounting solution for mini plastic gearmotors. The white plastic bracket clasps securely around the gearmotor, and the mounting tabs capture the nuts for easy installation. These brackets are sold in pairs, and each bracket comes with two M3 screws, two nuts, and a spacer.
The sensors operate from 2.7 V to 18 V and provide digital outputs that can be connected directly to a microcontroller or other digital circuit. This module is compatible with all of the Pololu dual-shaft mini plastic gearmotors. Pololu 1523
No product available!
Solarbotics GM6 120:1 Mini Gear Motor Offset Output
DC motor equipped with a metal gear 1:90 with a cut shaft on both sides
No product available!
DC motor with 1:48 plastic gearbox and double-sided shaft. Equipped with incremental encoder with Hall sensors. Includes bracket, mounting hardware and cord
DC motor with 1:48 plastic gearbox. equipped with incremental encoder with Hall sensors. Includes bracket, mounting hardware and cord
This compact, inexpensive plastic gearmotor (high-power brushed DC motor with a 120:1 reduction gearbox) is well suited for use in small robots. While intended for operation at 4.5 V, it should run comfortably in the 3 V to 6 V range.
DC motor with plastic gear 1:48. Equipped with an incremental encoder with Hall sensors.
High-power brushed DC motor with a 120:1 reduction gearbox, intended for operation at 4.5 V, 9.7mm-long gearbox, 3 mm-diameter D-shaped output shaft that is perpendicular to the motor shaft, and a built-in safety clutch. Pololu 1511
Solarbotics GM8 143:1 Gear Motor Offset Output
High-power brushed DC motor, 120:1 reduction gearbox, intended for operation at 4.5 V, 9.7mm-long gearbox, 3 mm-diameter D-shaped output shaft that is offset from but parallel to the motor shaft, built-in safety clutch. Pololu 1512
Solarbotics GM2 224:1 Gear Motor Offset Output
DC motor with a two-sided shaft with built-in 48: 1 gearbox.
A small motor with a plastic gear 120:1, operating voltage 4.5 V, current consumption from 0.08 A to 0.8 A, speed 120 RPM and a maximum torque of 1.4 kg*cm. Pololu 1122
DC motor with 1:84 planetary gear with a supply voltage from 6 to 24 V and a rotational speed of 140 RPM. Maximum current consumption up to 1.3 A. SparkFun ROB-15277
This tiny, cylindrical gearmotor consists of a coreless brushed DC motor and a 700:1 plastic planetary gearbox. The entire assembly has a diameter of just 6 mm (0.24″) and an extremely light weight of 1.3 g (0.046 oz), making it a great actuator for miniature robots and very small mechanisms.
Plastic gear motor 200:1, output shaft at 90°, operating voltage 6 V, current consumption from 0.07 A to 0.8 A, speed 85 RPM and a maximum torque of 5.4 kg*cm. Pololu 1121
Solarbotics GM9 143:1 Gear Motor 90 deg. Output
A small motor with a plastic gear 120:1, the output shaft at an angle of 90° with a diameter of 3mm in the shape of the "D", operating voltage 4.5 V, current consumption from 0.08 A to 0.8 A, speed 120 RPM and maximum torque 1.4 kg*cm. Pololu 1124