STEVAL-1PS01AJR – Evaluation board for the ST1PS01 step-down converter module
ID: 587973
5902186302808
zł92.90
Tax included
zł75.53 tax excl.
ST1PS01AJR evaluation module for testing the 1.9–2.8 V low-power step-down converter. STMicroelectronics STEVAL-1PS01AJR
Description
The STEVAL-1PS01AJR is a compact and efficient evaluation module based on the STMicroelectronics ST1PS01 step-down converter. The converter supplies up to 400 mA and provides a configurable output voltage in the 1.9 – 2.8 V range, selectable via two digital inputs (D0, D1).
The integrated converter operates over a wide input voltage range (1.8 – 5.5 V) and delivers a stable output with very low quiescent current (approx. 500 nA) and high efficiency (up to 94%). It includes advanced power management features such as PFM mode for light loads and integrates passive components on the board for simplified final design.
Features
- Input voltage range: 1.8 – 5.5 V
- Configurable output voltage: 1.9 – 2.8 V
- High efficiency up to 94%
- Output current: up to 400 mA
- Minimal external components: typically 2.2 µH inductor
- PFM and PWM operating modes
- Compact size and easy integration
- Ideal for portable, IoT, and wearable applications
587973
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Step-Down converter with an output voltage of 5 V, input voltage from 4.5 to 40 V and a maximum current of 2 A. The board is equipped with a segment LED display and a USB output
zł17.96
24h
Available quantity: 4
Available
The Step-Down converter module converts the input voltage of 7 - 26 V to a constant 5 V, with a maximum output current of 3 A, recommended up to 1.6 A for long-term operation. The conversion efficiency of the device is 96% and the module size is 22.3 x 17 x 4.2 mm
zł4.32
24h
Available quantity: 54
Available
This compact (0.4″ × 0.5″) switching step-down (or buck) voltage regulator takes input voltages up to 50 V and efficiently reduces them to 15 V while allowing for a maximum output current of 600 mA. It has a very low dropout, so it can be used with input voltages that are within a few hundred millivolts of its output.
zł26.84
24h
Available quantity: 1
Available
The S7V8F3 step-up/step-down converter regulates the voltage at 3.3 V, supporting an input voltage range of 2.7 V to 11.8 V, making it ideal for battery-powered applications. With an efficiency of over 90% and protection against short circuits and overheating, it provides reliable and energy-efficient operation in a wide range of conditions. Pololu 2122
zł35.95
24h
Available quantity: 4
Available
Step Down converter module with an output voltage of 5 V and a maximum current of 2x2,5 A. The board is equipped with four USB connectors
zł23.59
24h
Available quantity: 5
Available
The Step-Down converter module on the MP1584EN chip converts the input voltage 9-35V to output voltage 5V with a maximum current of 5A and a power of 25W. It operates in temperatures from -20°C to 75°C and has a compact size of 45 x 31 x 16 mm
zł4.00
24h
Available quantity: 95
Available
Safety system for two Li-Ion cells with 11.1V. The module has the function of charging cells with the balancer, discharging and the function of protecting the cells against discharge. Cells can be charged with continuous current up to 20A and discharged with current 40A. modBMS40A
zł11.75
24h
Available quantity: 1
Available
The Step Down DC-DC converter module (MP2307) allows to obtain 0.93..18V output voltage at 4.75..24V input voltage. The output voltage is regulated by a potentiometer
zł8.18
24h
Available quantity: 7
Available
A cable with a built-in converter that increases the voltage from the USB connector to 9 V. It is equipped with a DC Jack 2.1 x 5.5 mm plug
zł4.93
24h
Available quantity: 28
Available
A handy way to power 12V powered devices with a center-positive 2.1mm DC barrel jack from a USB port. Adafruit 2778
zł32.98
4 weeks
No product available!
The Step-Up NCP1402 Buck Voltage Regulator module with output voltage 3.3V, input voltage range of 0.8-3.3V and a maximum output current of 200 mA. Pololu 2114
zł38.47
24h
Available quantity: 2
Available
The Step-Up Buck Voltage Regulator module with output voltage of 3.3V and input voltage range of 1-3V and a maximum output current of 200 mA. SparkFun PRT-10967
zł25.94
3 weeks
No product available!
BMS system for five Li-Ion cells with a voltage of 21 V. It has the function of charging with balancer, discharging and over-discharge protection. The cells can be charged with continuous current up to 60 A and discharged with current up to 80 A
zł13.90
24h
Available quantity: 5
Available
A step-down converter module that allows you to reduce the input voltage from 5.1–36 V to a stable 5 V, ensuring high efficiency thanks to SMPS technology. A maximum output current of 600 mA allows you to power microcontrollers, IoT modules, and other electronic systems. The device is equipped with short circuit and overheating protection and offers very low quiescent current. Pololu 5593
zł11.94
24h
Available quantity: 3
Available
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 3.3 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 80% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.
zł101.88
4 weeks
No product available!
Modular power supply with a power of 3 W, input voltage from 100 to 240 V and output voltage of 3.3 V. Designed for mounting on a PCB. Hi-Link HLK-PM03
zł14.77
4 weeks
No product available!
ST1PS01AJR evaluation module for testing the 1.9–2.8 V low-power step-down converter. STMicroelectronics STEVAL-1PS01AJR