BME280 sensor module (pressure, temperature, humidity) - Waveshare 15231
ID: 1180746
5906623422913
zł42.00
Tax included
zł34.15 tax excl.
Module with pressure, temperature and humidity sensor BME280. It allows to read the atmospheric pressure in the range from 300 to 1100 hPa and communicates via the I2C or SPI interface. Waveshare BME280 Environmental Sensor
Description
Module with pressure, temperature and humidity sensor BME280. It allows you to read atmospheric pressure in the range from 300 to 1100 hPa with an accuracy of ± 1 hPa, temperature in the range from -40 to 85℃ with an accuracy of ± 1°C and humidity with an accuracy of ± 3%. The module communicates via the I2C or SPI interface. It has a built-in voltage level converter, so it can work with 3.3V or 5V systems. It is an ideal solution for home temperature measurement, as well as for measuring altitude when flying at high altitudes. Documentation with examples is available on the product page.
Features
- Pressure measurement: from 300 to 1100 hPa (resolution 0.18 Pa, accuracy ± 1hPa)
- Temperature measurement: -40 to 85℃ (resolution 0.01°C, accuracy ± 1°C)
- Humidity measuring range: 0 to 100% RH (resolution 0.008% RH, accuracy ± 2% RH)
- Converter of voltage levels 3.3/5V
- Supply voltage: from 3.3 V to 5 V
- I2C or SPI interface
- Dimensions: 27 x 20 mm
Kit contains
- BME280 Environmental Sensor module
- JST PH2.0 6-pin cable, 20 cm
1180746
Data sheet
- Interface
- SPI/I2C
- Type of sensor
- BME280
- Power supply voltage
- 3,3 V/5 V
- Sensor type
- Ciśnienia atmosferycznego
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
24h
Available quantity: 107
Available
STM32 Nucleo development board for STM32 F4 series - with STM32F401RE MCU, 512KB flash memory, STM, RoHS
zł74.60
24h
Available quantity: 8
Available
STM32 Nucleo-64 development board with STM32L476RGT6 MCU, supports Arduino and ST morpho connectivity
zł84.89
24h
Available quantity: 24
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł252.90
Delivery date unknown
No product available!
Other products in the same category (16)
Module with an absolute pressure sensor LPS25HB. The system is characterized by wide measuring range from 260 to 1260 hPa and high measurement resolution (0.01 hPa). I2C or SPI communication. SparkFun SPX-14767
zł69.93
24h
Available quantity: 1
Available
Pressure sensor module with I2C interface (MPL115A2)
zł44.90
24h
Available quantity: 19
Available
Multi-functional environmental sensor consisting of SHTC3 temperature and humidity sensor, BMP280 pressure sensor, VEML7700 ambient light sensor and ML8511 UV sensor. DFRobot SEN0500
zł123.16
24h
Available quantity: 1
Available
Module with digital barometer BMP384. It enables pressure measurement in the range from 300 to 1250 hPa with 24-bit resolution and communicates via I2C or SPI. SparkFun SEN-19662
zł70.42
24h
Available quantity: 1
Available
Module with a BME688 sensor for measuring gas concentration, pressure, temperature and humidity. I2C or SPI communication. SparkFun SEN-19096
zł196.21
24h
Available quantity: 3
Available
Atmospheric pressure sensor module with altitude and temperature measurement function. It has the ability to program events and sampling frequency (in the range from 1s to 9h). The MPL3115A2 sensor is fully internally compensated. SparkFun SEN-11084
zł99.42
3 weeks
No product available!
Module with a pressure sensor with high accuracy HP206C. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020068
zł131.47
24h
Available quantity: 1
Available
Module with pressure, temperature and humidity sensor BME280. It allows to read the atmospheric pressure in the range from 300 to 1100 hPa and communicates via the I2C interface. Pimoroni PIM472
zł75.68
24h
Available quantity: 7
Available
BMP390 digital barometer module. Measures pressure from 300 to 1250 hPa and temperature from -40℃ to 85℃. It communicates via an I2C or SPI interface. Waveshare BMP390 Barometric Pressure Sensor
zł53.73
24h
Available quantity: 3
Available
Module with an absolute pressure sensor LPS25HB. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4530
zł56.47
24h
Available quantity: 2
Available
Module with digital barometer BMP390. It enables pressure measurement from 300 to 1250 hPa and temperature from -40℃ to 85℃. Communicates via I2C or SPI. Adafruit 4816
zł56.09
24h
Available quantity: 3
Available
Precision sensor from Bosch for measuring humidity with ±3% accuracy, barometric pressure with ±1 hPa absolute accuraccy, and temperature with ±1.0°C accuracy Adafruit 2652
zł78.11
24h
Available quantity: 1
Available
Module with a digital barometer DPS310. It enables pressure measurement in the range from 300 to 1200 hPa and communicates via I2C or SPI. Adafruit 4494
zł36.84
4 weeks
No product available!
Grove module with temperature, humidity and pressure sensor. The board is equipped with a Grove connector and communicates via I2C or SPI. Seeed Studio 101020193
zł92.99
24h
Available quantity: 3
Available
The GY-BMP280 is an atmospheric pressure sensor module. It allows measurement in the range of 300 ... 1100 hPa with an accuracy of 1 hPa. The sensor uses I2C or SPI bus
zł5.98
24h
Available quantity: 132
Available
Water pressure sensor with 3-pin Gravity interface. It enables the measurement of liquid pressure in the range from 0 to 1.6 MPa. It is supplied with the voltage of 5 V and has a linear output voltage from 0.5 to 4.5 V. DFRobot SEN0257
zł88.89
24h
Available quantity: 1
Available
Module with pressure, temperature and humidity sensor BME280. It allows to read the atmospheric pressure in the range from 300 to 1100 hPa and communicates via the I2C or SPI interface. Waveshare BME280 Environmental Sensor