Qwiic Air Velocity Sensor - module with an air speed sensor FS3000-1005
ID: 587719
5906623419036
zł339.15
Tax included
zł275.73 tax excl.
Air speed sensor module based on the FS3000-1005 chip. The board is equipped with Qwiic connectors. SparkFun SEN-18377
Description
The air speed sensor module is based on the FS3000-1005 chip, which allows the measurement in the range from 0 to 7.2 m/s. It uses a MEMS thermoelectric sensor that offers a digital output with 12-bit resolution. The system has a silicon carbide coating to protect against abrasive wear and water condensation. The module is supplied with the voltage of 3.3 V and communicates via the I2C (Qwiic) interface. Full documentation with examples is available on the product page.
Features
- I2C interface
- I2C address: 0x28
- Air velocity: 0 to 7.23 m/s
- Accuracy: 5% of full flow range
- 12-bit resolution
- 2 x Qwiic connector
- Input voltage: 2.7 to 3.3V
- Average current consumption: 10 mA
587719
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Flexible Qwiic cable 150 mm long. On one side it is terminated with a female Qwiic connector, and on the other side with single male goldpin connectors. SparkFun PRT-17912
zł10.47
24h
Available quantity: 15
Available
Flexible Qwiic cable, 150 mm long. On one side it is terminated with a female Qwiic connector, and on the other side with single female goldpin connectors. SparkFun PRT-17261
zł12.35
24h
Available quantity: 17
Available
Flexible 4-core cable, 50 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17260
zł9.10
24h
Available quantity: 25
Available
Flexible 4-core cable, 100 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17259
zł12.56
24h
Available quantity: 22
Available
Other products in the same category (16)
The expansion module is designed for micro:bit sets. Offers a simple, beginner-friendly robotics controller. SparkFun DEV-15713
zł421.69
24h
Available quantity: 1
Available
Module with BME680 sensor for measuring environmental conditions such as concentration of volatile organic compounds (VOC), atmospheric pressure, temperature and humidity. I2C or SPI communication. SparkFun SEN-16466
zł109.00
24h
Available quantity: 3
Available
Miniature pressure measurement module equipped with a 25 psi piezoresistive pressure sensor. It allows you to perform calibrated and compensated pressure measurements from 60 mbar to 2.5 bar. SparkFun SEN-16476
zł207.73
24h
Available quantity: 1
Available
Ultrasonic distance sensor with a measuring range from 2 to 400 cm. It communicates via a standard interface (Echo, Trigger) or the I2C bus. SparkFun SEN-17777
zł103.66
24h
Available quantity: 2
Available
LiPo battery monitor module based on the MAX17048 chip. Allows the voltage and state of charge of the battery to be measured. SparkFun SPX-17715
zł41.28
24h
Available quantity: 1
Available
The expansion module is designed for micro:bit board. Controller: bit offers a fully functional controller module with a design based on a classic Nintendo controller. SparkFun DEV-16129
zł88.65
24h
Available quantity: 2
Available
Module with 24-bit ADC NAU7802 converter. It enables reading data from strain gauges and scales. I2C interface. SparkFun SEN-15242
zł95.92
24h
Available quantity: 5
Available
Module with a 4-element 14-segment display. The board is equipped with a Qwiic connector and communicates via the I2C interface. SparkFun COM-16917
zł51.45
24h
Available quantity: 2
Available
GPS module with SAM-M10Q GNSS receiver. The chip can receive data from all major positioning systems: GPS, GLONASS, Galileo, QZSS and BeiDou. It has derived UART and I2C interfaces. SparkFun GPS-21834
zł299.00
24h
Available quantity: 2
Available
Module with an IO pin expander based on the TCA9534 system. It allows you to add 8 GPIO pins to an I2C-controlled project. SparkFun DEV-17047
zł31.65
24h
Available quantity: 1
Available
Air velocity sensor module based on the FS3000-1015 system. The board is equipped with connectors in the Qwiic standard. SparkFun SEN-18768
zł397.08
3 weeks
No product available!
Module with ToF VL53L4CD sensor with a range of up to 1.3 m and a resolution of 1 mm. It is equipped with a Qwiic connector and communicates via the I2C interface. SparkFun SEN-18993
zł106.63
24h
Available quantity: 1
Available
Module with an analog joystick that returns the X and Y position and the pressed state. The module has an ATtiny85 microcontroller on the board, which processes analog data of the joystick and sends it via the I2C interface. SparkFun COM-15168
zł68.33
24h
Available quantity: 2
Available
Module with 3-axis accelerometer and ISM330DHCX gyroscope. Equipped with a Qwiic connector, it communicates via the I2C interface. SparkFun SEN-20176
zł202.72
3 weeks
No product available!
Module with 20x4 characters LCD display and ATMega328p microcontroller. The user can communicate with the module through one of the serial interfaces: UART, I2C or SPI. SparkFun LCD-16398
zł151.41
3 weeks
No product available!
An adapter that allows you to quickly and easily connect Qwiic modules to Arduino boards using the ESLOV connector for I2C communication. SparkFun BOB-23589
zł13.03
24h
Available quantity: 2
Available
Air speed sensor module based on the FS3000-1005 chip. The board is equipped with Qwiic connectors. SparkFun SEN-18377