

zł5.65 tax excl.
The 5V relay module with opto-isolation allows you to safely control loads up to 10A at voltages up to 250V AC or 30V DC, working with microcontroller platforms such as Arduino or Raspberry Pi
The module equipped with the JQC-3FF-S-Z relay allows you to control electrical devices that draw up to 10 A at a voltage of up to 250 V AC or 30 V DC. Thanks to the applied opto-isolation (EL817), the control signal is galvanically separated from the executive part, which increases the safety of the control system. The module can be controlled by platforms such as Arduino, Raspberry Pi or STM32.
The module's leads have a standard 2.54 mm pitch, which makes it easy to connect using connecting cables. Mounting holes with a diameter of 3 mm allow for convenient attachment of the module to the substrate.
The system is switched on with a low state - applying a LOW signal to the IN input causes the relay to switch. The relay contacts are marked as:
Depending on the load used, the module has a power consumption of 0.36 W to 0.51 W. It can operate at temperatures from -25°C to +70°C and at humidity from 45% to 85%.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Finder 70.41.8.400.2030 is a voltage monitoring relay for three-phase AC networks with an interphase voltage of 380–415 V AC. The device allows for delay adjustment in the range of 0.5 to 60 seconds, and its output is a single-pole double-throw (SPDT) contact with a 6 A load capacity at 250 V AC. The relay is designed for DIN rail mounting and is equipped with screw terminals.
The Finder 30.22.7.024.0020 is a compact DPDT relay, operating on a coil voltage of 24V DC, capable of switching currents up to 2A at 125V AC on each of its two contacts. Its small size and reliable construction make it ideal for applications requiring space saving and reliable operation, while PCB mounting facilitates integration into printed circuits.
Finder 066.07 is a DIN rail mounting bracket designed for automation systems and electrical installations. The solid construction ensures secure mounting and facilitates quick installation of relays and other components in control cabinets.
Finder 90.03SMA is an 11-pin relay socket with screw terminals, designed for DIN rail or panel mounting, and compatible with relays from series 60.13. It supports currents up to 10 A at 250 V AC, ensuring reliable connections in industrial applications.
Finder 32.21.7.024.230 is a miniature SPST-NO relay, powered by 24 V DC, designed for automation and control systems. It supports current up to 6 A at 250 V AC, which guarantees reliability in operation with various loads.
The Finder 93.11 socket is an accessory for mounting relays on PCBs, supporting up to 6A at 250VAC. Its 5-pin design ensures a stable connection, and compatibility with 40.31 series relays makes it an ideal solution for automation and control systems.
Finder 55.34.8.230.0054 is an industrial electromagnetic relay with a 230 V AC coil, equipped with four changeover contact sets (4PDT) with a maximum current of 7 A. The relay features AgNi contacts and a lockable test button, facilitating diagnostics and maintenance.
Finder 38.52.7.024.0050 is a relay interface module with a 24 V DC coil, equipped with two changeover contacts (DPDT) with a load capacity of 8 A. It is designed for DIN rail mounting and features screw terminals for easy installation.
The Finder 95.15.2SMA socket is a high-quality accessory for mounting relays on PCBs, supporting current up to 10A at 250VAC. Compatible with 40 and 41 series relays, it provides a solid and stable connection, ideal for applications in automation and industrial installations.
Finder 41.81.7.024.8240 is a solid-state relay (SSR) with one normally open contact (SPST-NO), capable of handling a maximum load current of 3 A and a load voltage range of 12–275 V AC. It is controlled by a 24 V DC input voltage and designed for PCB mounting, featuring compact dimensions of 29 x 12.7 x 15.7 mm.
No product available!
The Finder 36.11.9.024.4001 relay is a reliable SPDT relay, designed to operate with a 24VDC coil and handle up to 10A current at 250VAC. Its compact design and 6kV voltage resistance ensure safe and stable operation in automation systems and electrical installations.
Finder 38.51.0.024.0060 is an interface relay module with a 24 V AC/DC coil, equipped with a single changeover contact (SPDT) with a 6 A load capacity at 250 V AC. It is designed for DIN rail mounting, facilitating easy integration into industrial automation systems.
The Finder 72.01.8.240.0000 conductive liquid level transmitter monitors liquid levels in industrial installations, allowing control of filling and emptying of tanks. Powered by 230-240 V AC, it is designed for mounting on a DIN rail, which facilitates integration into systems.
The Finder 93.01.7.024 socket is a high-quality accessory for mounting relays on a DIN rail, compatible with the Finder 40.31 series. It supports current up to 6A at a voltage of 250VAC, and thanks to its 5-pin design, it ensures quick connection and stable installation in automation systems and industrial installations.
The Finder 62.82.8.230.0300 electromagnetic relay is a robust component for industrial electrical and automation applications, offering high reliability and high current capacity. Equipped with a 230V AC coil, it allows switching currents up to 16A at a voltage of 250VAC on each of the two independent contacts, making it ideal for controlling devices with high power consumption.
Finder 7S.14.9.024.4220 is a modular safety relay equipped with two normally open (NO) contacts and two normally closed (NC) contacts, each with a 6 A load capacity at 250 V AC. The relay is powered by a 24 V DC coil voltage and is designed for DIN rail mounting, facilitating easy integration into industrial automation systems.
The 5V relay module with opto-isolation allows you to safely control loads up to 10A at voltages up to 250V AC or 30V DC, working with microcontroller platforms such as Arduino or Raspberry Pi