- Out-of-Stock
Module with a 2.9" ePaper display and a Raspberry Pi Pico W board equipped with WiFi communication. It has a built-in Qwiic/Stemma QT connector with an I2C interface, buttons and a battery connector. Perfect as a display for a weather station. Pimoroni PIM669
Module with a black and white ePaper display with a diagonal of 2.9". The display is controlled by a Raspberry Pi Pico W board with an RP2040 microcontroller equipped with two ARM Cortex-M0+ cores operating at a frequency of 133 MHz, 264 kB RAM and 2 MB of external QSPI Flash memory Additionally, the board is equipped with the Infineon CYW43439 system, which extends the board with WiFi wireless connectivity.
The board has 5 user buttons and a Qw/ST connector (Qwiic/STEMMA QT) with an I2C interface, which allows you to connect additional sensors. It is powered by a Micro USB connector or a JST-PH connector using a battery.
The module uses a black and white e-Paper display with a diagonal of 2.9" and a resolution of 296x128 pixels. The built-in controller communicates via the SPI interface. e-Paper displays are characterized by high contrast of the displayed image and consume power only when the displayed content changes. The set includes a battery basket and a strap that allows you to use the module as a pendant. It can be used as an electronic business card, a portable to-do list, or even as part of a weather station.
Data sheet
Manufacturer
Responsible person
Module with ePaper 2.9" display and RP2040 microcontroller. Equipped with QW/ST connector. Pimoroni PIM607
A portable Smart oscilloscope with an 8-inch LCD display and a touch screen. It has two measurement channels and has good measurement parameters: 200 MHz band, 2 GSa/s sampling rate and 280 Mpts memory buffer. Micsig STO2202C
No product available!
A portable Smart oscilloscope with an 8-inch LCD display and a touch screen. It has two measurement channels and has good measurement parameters: 150 MHz band, 1 GSa/s sampling rate and 70 Mpts memory buffer. Micsig STO1152E
No product available!
Industrial RS485 - Ethernet converter. It is equipped with PoE function and is DIN-rail mounted. Waveshare RS485 TO POE ETH (LF)
No product available!
10.3" monitor with e-Paper screen equipped with a mini HDMI interface. It offers a resolution of 1872×1404 pixels, a wide viewing angle and low power consumption. Waveshare EINK-DISP-103B (EU)
No product available!
9.7" monitor with e-Paper screen equipped with a mini HDMI interface. It offers a resolution of 1200x825 pixels, a wide viewing angle and low power consumption. Waveshare EINK-DISP-97 (EU)
No product available!
Multi-band 5G NR/LTE-FDD/LTE-TDD/HSPA+ module that supports R15 5G NSA/SA data transfer up to 2.4Gbps. It features UART, PCIe, USB3.1 and GPIO interfaces. Waveshare SIM8200EA-M2
No product available!
A portable gaming console based on the Raspberry Pi Zero, featuring a 2" IPS LCD display and speaker. Waveshare GamePi20 Acce
No product available!
High-power dual power supply module based on LT1083CP voltage regulators. It has an adjustable output voltage from 1.25 to 48 V DC and an output current of up to 10 A. It provides power for both channels in stereo audio amplifiers
No product available!
High voltage differential probe. It is characterized by good measurement parameters: 100 MHz band and working voltage up to 750 V. The probe has two attenuation factors: 50X and 500X and uses the UPI interface. Micsig DP750-100
No product available!
High voltage differential probe. It is characterized by good measurement parameters: with a 100 MHz band and an operating voltage up to 5600 V. The probe has two attenuation factors: 200X and 2000X. Micsig DP20003
No product available!
Probe for measuring direct and alternating current with a current of up to 30 A. Works in the band up to 100 MHz, it can be connected to the oscilloscope through the UPI connector. It does not require an external power supply. Micsig CP1003
No product available!
Probe for measuring direct and alternating current with a current of up to 30 A. Works in the band up to 50 MHz, it can be connected to the oscilloscope through the UPI connector. It does not require an external power supply. Micsig CP503
No product available!
Self-assembly case designed for minicomputers Odroid H3 and Odroid H3+. Equipped with a place for a fan. Hardkernel ODROID-H3 Case Type 2
No product available!
Self-assembly case designed for minicomputers Odroid H3 and Odroid H3+. Equipped with a place for a network card. Hardkernel ODROID-H3 Case Type 6
No product available!
Self-assembly case designed for minicomputers Odroid H3 and Odroid H3+. Equipped with a slot for a network card and two slots for a 2.5" SATA drive. Hardkernel ODROID-H3 Case Type 7
No product available!
Qwiic Tsunami Super WAV Trigger - a module with a multi-channel WAV player
No product available!
Module with a 2.9" ePaper display and a Raspberry Pi Pico W board equipped with WiFi communication. It has a built-in Qwiic/Stemma QT connector with an I2C interface, buttons and a battery connector. Perfect as a display for a weather station. Pimoroni PIM669