- Out-of-Stock
TSL2561FN
ID: 185561
Light-to-digital Converter, I2C, DFN6, TAOS, RoHS
TSL2561FN
Light-to-digital Converter, I2C, DFN6, TAOS, RoHS
The TSL2561 is a light-to-digital converter that transforms light intensity to a digital signal output capable of direct I2C (TSL2561) interface. Each device combines one broadband photodiode (visible plus infrared) and one infrared-responding photodiode on a single CMOS integrated circuit capable of providing a near-photopic response over an effective 20-bit dynamic range (16-bit resolution). Two integrating ADCs convert the photodiode currents to a digital output that represents the irradiance measured on each channel. This digital output can be input to a microprocessor where illuminance (ambient light level) in lux is derived using an empirical formula to approximate the human eye response. The TSL2561 device supports a traditional level style interrupt that remains asserted until the firmware clears it.
Light-to-digital Converter, I2C, DFN6, TAOS, RoHS
The TSL2561 is a light-to-digital converter that transforms light intensity to a digital signal output capable of direct I2C (TSL2561) interface. Each device combines one broadband photodiode (visible plus infrared) and one infrared-responding photodiode on a single CMOS integrated circuit capable of providing a near-photopic response over an effective 20-bit dynamic range (16-bit resolution). Two integrating ADCs convert the photodiode currents to a digital output that represents the irradiance measured on each channel. This digital output can be input to a microprocessor where illuminance (ambient light level) in lux is derived using an empirical formula to approximate the human eye response. The TSL2561 device supports a traditional level style interrupt that remains asserted until the firmware clears it.
Features:
- Approximates Human Eye Response
- Programmable Interrupt Function with User-Defined Upper and Lower Threshold Settings
- 16-Bit Digital Output: I2C Fast-Mode @ 400 kHz (TSL2561)
- Programmable Analog Gain and Integration Time Supporting 1,000,000-to-1 Dynamic Range
- Automatically Rejects 50/60-Hz Lighting Ripple
- Low Active Power (0.75 mW Typical) with Power Down Mode
- RoHS Compliant
185561
Other products in the same category (16)
No product available!
This sensor shield utilizes the BME280 pressure/humidity/temperature sensor, the CCS811 air quality sensor and the APDS-9301 ambient light sensor - using each corresponding Arduino library. The shield has been equipped with two RJ11 connectors for wind and rain detection and measurement, as well as optional pins for external temperature readings and soil moisture sensor. DEV-14153
Retired
No product available!
Jacek Hauser
Delivery date unknown
No product available!
Module with a 1.3" black and white LCD display. It has a resolution of 144x168 pixels and a built-in SRAM memory. Communication is realized via the SPI interface. Waveshare 144x168, 1.3inch Bicolor LCD
Retired
No product available!
No product available!
No product available!
EMW3162 WIFI Shield consists of a base plate and WiFi module EMW3162. Works with Arduino and STM32 Nucleo. Built-in USB-UART converter
Retired
No product available!
No product available!
Mike Riley
Delivery date unknown
No product available!
No product available!
Mobile battery with a capacity of 8000 mAh, with flashlight function, for charging portable electronic devices, powered by 5V. The Power Bank is charged via the micro USB connector
Retired
No product available!
Lithium 3V / 210mAh lithium coin cell battery. Battery dimensions: diameter 20mm, height 3.2mm, weight 3.1g
Retired
No product available!
16x2 Character OLED Display, 122x44, Negative Black Surface, Yellow Dot, 5V, RoHS
Retired
No product available!
Small computer based on Samsung Exynos5422 Cortex™-A15 2Ghz and Cortex™-A7 Octa core CPUs. The Ordoid XU4 does not includes Power Supply 5V 4A and Cooling Fan (mounted)
Retired
No product available!
No product available!
No product available!
Light-to-digital Converter, I2C, DFN6, TAOS, RoHS