- Out-of-Stock

These seven-pin housings work with our wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 10.
These housings work with our wires with pre-crimped terminals and our crimp pins to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male and female headers and solderless breadboards. Just pick the housing for the correct number of pins, pick the colors and genders for your wires, and snap them into the housings (note: it’s not easy to get the wires back out, so plan carefully!).
You can easily make cable harnesses or assemblies that branch from one connector on one side to multiple connectors on the other; you can also cut off one pre-crimped end and solder the wires directly to components to make swapping connections easy:
|
|
![]() |
![]() |
Pins | A (mm) | B (mm) |
---|---|---|
1×1 | – | 2.54 |
1×2 | 2.54 | 5.08 |
1×3 | 5.08 | 7.62 |
1×4 | 7.62 | 10.16 |
1×5 | 10.16 | 12.70 |
1×6 | 12.70 | 15.24 |
1×7 | 15.24 | 17.78 |
1×8 | 17.78 | 20.32 |
1×9 | 20.32 | 22.86 |
1×10 | 22.86 | 25.40 |
1×12 | 27.94 | 30.48 |
1×16 | 38.10 | 40.64 |
2×2 | 2.54 | 5.08 |
2×3 | 5.08 | 7.62 |
2×4 | 7.62 | 10.16 |
2×5 | 10.16 | 12.70 |
2×6 | 12.70 | 15.24 |
2×7 | 15.24 | 17.78 |
2×8 | 17.78 | 20.32 |
2×10 | 22.86 | 25.40 |
2×16 | 38.10 | 40.64 |
![]() |
0.1" (2.54mm) Crimp Connector Housing: 1x2-Pin 25-Pack |
![]() |
0.1" (2.54mm) Crimp Connector Housing: 1x3-Pin 25-Pack |
![]() |
0.1" (2.54mm) Crimp Connector Housing: 1x4-Pin 10-Pack |
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Development kit chipKIT DP32 equipped with PIC32MX250F128B microcontroller (40/50 Mhz, 128 kB Flash, 32 kB RAM), prototype area with solder pads, potentiometer, 4 LED diodes, 2 buttons and soldering pads for EEPROM memory and analog temperature sensor. Digilent 410-280P-KIT
No product available!
Permanent cylindrical neodymium magnet with a diameter of 15 mm and a height of 2 mm.
No product available!
No product available!
No product available!
Panasonic Eneloop R03/AAA rechargeable batteries with a capacity of 800mAh and a voltage of 1.2V. The set contains two pieces sold in a blister packaging. Panasonic BK-4MCCE/2BE
No product available!
3.5" LCD display with touch screen, 480x320 pixel resolution. Controlled via SPI interface. ArduCAM U6111
No product available!
AQUARIUM CONTROLLER - PRINTED PLATES AND PROGRAMMED SYSTEMS - PRINTED BOARD AND PROGRAMMED LAYOUT
No product available!
Male terminal block, angled, 4-pin. Pitch 3.81mm. Height 7mm. 15EDGRC
No product available!
A set of PCB boards and a programmed layout for building a simple led clock. AVT3132 A +
No product available!
The switch module has a relay with a control function via a WiFi network. It can be connected to a WiFi network or act as a stand-alone access point. Shelly 1 Open Source
No product available!
Li-Ion battery type 18650 with a nominal voltage of 3.6 V and a capacity of 3200 mAh. Akyga AKY0926
No product available!
No product available!
"Digital Design using Digilent FPGA Boards 2nd Edition, 2012" Richard E. Haskell & Darrin M. Hanna - EDU
No product available!
No product available!
The Timer is one of UGEAR’s most beautiful models. It is an exquisite and refined mechanical device that can count down to zero starting from 1 to 20 minutes. UGears 70004
No product available!
No product available!