- Out-of-Stock
New products
New products New products
zł343.01
24h
Available
Available
Available
Available
Available
A7600E Cat-1/GSM/GPRS HAT with LTE/GSM/GPRS module for Raspberry Pi - Waveshare 18808
ID: 583716
Expansion board with LTE Cat-1/GSM/GPRS module designed to work with Raspberry Pi minicomputers. Waveshare A7600E Cat-1/GSM/GPRS HAT
Description
Expansion board with LTE Cat-1/GSM/GPRS module designed to work with Raspberry Pi minicomputers. It is based on the A7600E chip, which combines communication within the 4G LTE Cat-1 network as well as 2G (GSM and GPRS) networks. The module supports TCP / IP, HTTP (s), MQTT (s), FTP (s) and SSL protocols, enabling work in cloud communication, and supports telephone connections, SMS sending, Dial-up function and LBS positioning. Communication with the module takes place via a USB connector or a 40-pin connector and a set of AT commands. The board has two microUSB connectors (communication, debugging), audio connector, antenna connector, microSD card slot and SIM card slot, as well as a 40-pin connector compatible with Raspberry Pi and Jetson Nano and a communication connector for Arduino and STM32.
| 1. A7600E module | 13. USB - UART debug interface |
| 2. USB - UART converter | 14. Antenna connector |
| 3. Audio decoder NAU8810 | 15. Power supply switch |
| 4. Voltage converter | 16. Network indicator |
| 5. Power chip MP2128DT | 17. Power indicator |
| 6. Power chip MP1482 | 18. UART selection switch |
| 7. 40-pin connector | 19. Power jumper |
| 8. Connector for communication with A7600E | 20. Flight mode selection |
| 9. SIM card slot | 21. Voltage selection |
| 10. microSD card slot | 22. USB pads |
| 11. Jack 3,5 mm | 23. BOOT pads |
| 12. USB interface |
The module will be perfect for all projects requiring communication within cellular networks for the transmission of measurement or location data. Full documentation with configuration examples is available on the Wiki website.
Features
- Frequency band:
- LTE Cat-1: LTE-FDD: B1/B3/B5/B7/B8/B20, LTE-TDD: B38/B40/B41
- 2G GSM/GPRS/EDGE: 900/1800 MHz
- SMS transmission: MT, MO, CB, Text, PDU
- It supports TCP/IP, HTTP (s), MQTT (s), FTP (s) and SSL
- Supports dial-up, telephone connection
- Supports LBS base station positioning
- TTS (Text To Speech) function, texts in Chinese and English
- Built-in USB interface for AT commands
- Built-in 3.5mm audio jack
- Built-in USB to UART converter for serial debugging or accessing the Raspberry Pi
- SIM card slot, support 1.8V/3V SIM card
- MicroSD card slot
- 2 x LED
- Built-in 3.3 V or 5 V voltage level converter (jumper configurable)
- Baud Rate: 300bps to 4 Mbps (Default: 115200bps)
- Support and examples for Raspberry Pi, Jetson Nano, Arduino, STM32
- Power supply: 3.3 V, 5V
- Dimensions: 56 x 65 mm
Kit contains
- A7600E Cat-1/GSM/GPRS HAT module
- MicroUSB cable
- Antenna
- Set of screws
583716
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.57
24h
Available quantity: 82
Available
STM32 Nucleo development board for STM32 F1 series - with STM32F103RBT6 MCU, 128KB flash memory, STM, RoHS
zł155.00
24h
Available quantity: 14
Available
STM32 Nucleo development board for STM32 F4 series - with STM32F401RE MCU, 512KB flash memory, STM, RoHS
zł79.64
24h
Available quantity: 11
Available
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł299.00
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 (4 x Cortex-A72) running at 1.8 GHz, 3 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł499.00
24h
Available quantity: 30
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł779.00
24h
Available quantity: 72
Available
Jetson Nano Dev Kit with ARM Cortex-A57 1.43 GHz CPU, 4 GB RAM and NVIDIA Maxwell GPU - Waveshare...
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
zł1,189.00
24h
Available quantity: 8
Available
Other products in the same category (16)
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Starter Juicy Green
Retired
No product available!
ROSA3D filament made of high-quality PET-G granules. 0.5 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PET-G Standard Glow in the Dark Green
Retired
No product available!
Adapter with a set of connectors specific to the Raspberry Pi 3 Model B/B+. It allows you to adapt the Raspberry Pi CM4 modules to projects based on Pi 3 model B/B+. Waveshare CM4-to-Pi3-Adapter
Retired
No product available!
Convenient to use retractable 3in1 USB cable with USB A plug and three output connectors: microUSB, USB Type C and Lightning
Retired
No product available!
Convenient to use retractable 3in1 USB cable with USB A plug and three output connectors: microUSB, USB Type C and Lightning
Retired
No product available!
Wall charger with built-in USB type-C cable. The maximum current generated by the charger is 3.1 A. eXtreme NTC31C
Retired
No product available!
Audio cable with 3.5 mm 3-pin minijack plugs and 3 x RCA (chinch) 0.24 m long
Retired
No product available!
Module with a black and white e-Paper display with a diagonal of 2.9" and a resolution of 296x128 px. Dedicated for Raspberry Pi Pico and Pico W. Pimoroni PIM634
Retired
No product available!
Development kit with Xilinx Spartan 3A FPGA. Equipped with a display, buttons, audio and video output and a microSD slot. Numato Lab FPGAX0006
Retired
No product available!
Development kit with Xilinx Spartan-6 FPGA. Equipped with displays, buttons, audio and video outputs and a breadboard. Numato Lab WXDE001
Retired
No product available!
The set with the RM502Q-AE module is designed to work with the Raspberry Pi minicomputer. It supports 5G, 4G and 3G networks and supports GNSS positioning. Waveshare RM502Q-AE 5G HAT (with case) (EU)
Retired
No product available!
The set with the RM502Q-AE module is designed to work with the Raspberry Pi minicomputer. It supports 5G, 4G and 3G networks and supports GNSS positioning. Waveshare RM502Q-AE 5G HAT (EU)
Retired
No product available!
The set with the RM500Q-AE module is designed to work with the Raspberry Pi minicomputer. It supports 5G, 4G and 3G networks and supports GNSS positioning. Waveshare RM500Q-AE 5G HAT (with case) (EU)
Retired
No product available!
The set with the RM500Q-AE module is designed to work with the Raspberry Pi minicomputer. It supports 5G, 4G and 3G networks and supports GNSS positioning. Waveshare RM500Q-AE 5G HAT (EU)
Retired
No product available!
Kit with the LTE Cat-6 EM06-E module designed to work with the Raspberry Pi minicomputer. It supports communication within the fast LTE-A network and GNSS positioning. Waveshare RM500U-CN 5G HAT
Retired
No product available!
ROSA3D filament made of high-quality PLA-Silk granules characterized by intense color and exceptional gloss. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. Filament ROSA3D PLA-Silk MIX-KOLOR
Retired
No product available!
Expansion board with LTE Cat-1/GSM/GPRS module designed to work with Raspberry Pi minicomputers. Waveshare A7600E Cat-1/GSM/GPRS HAT