- Out-of-Stock
Starter kit containing a Raspberry Pi 4B with 4 GB RAM and the necessary accessories. The official case will protect the computer from damage, the official cooling kit will keep the processor at the right temperature, a 32 GB memory card with the Raspberry Pi OS installed will facilitate initial configuration, the official power supply will provide a stable power supply to the raspberry, the official microHDMI - HDMI cable will allow you to connect the screen to a computer and an Ethernet cable that allows you to easily connect the Raspberry to the LAN network.

Kamami is the official distributor of Raspberry Pi minicomputers and dedicated accessories
The long-awaited Raspberry Pi 4 model B with the Broadcom BCM2711 SoC (4 x Cortex-A72) SoC running at 1.5GHz clock rate, 4 GB LPDDR4 RAM (also available with 2 GB ) and the Broadcom graphics chip VideoCore VI.

The computer has a built-in wireless module with Wi-Fi interfaces (IEEE 802.11b / g / n / ac 2.4 / 5 GHz) and Bluetooth 5.0 / BLE. In addition, the board has 2 USB 2.0 ports, 2 USB 3.0 ports, a 40-pin GPIO connector (identical to previous computer), 2 microHDMI ports for connecting screens, Gigabit Ethernet (RJ45 socket), DSI connector (for display connection) , CSI connector (for camera connection), microSD card slot and 4 mounting holes.
The Raspberry Pi 4 model B uses a type C USB port as a power supply port. The manufacturer recommends a 5 V power supply and a current capacity of min. 3 A. Our offer includes a dedicated Raspberry power supply ( 5V / 3A USB-C to Raspberry Pi 4 black or white ). Raspberry can also be fed through GPIO (5V @ 3A) or PoE ports.
The offer also includes the official housing for Raspberry Pi 4 model B (white and raspberry) .

Kamami is the official distributor of Raspberry Pi minicomputers and dedicated accessories.

Compared to its predecessor Raspberry Pi 3, the B + model , the SoC system was made in 28 nm technology (40 nm in previous computers). Includes four ARM Cortex-A72 cores built into it that can work at 1.5 GHz. The changes have also occurred in the type and amount of RAM. The basic model has 1 GB RAM type LPDDR4 SDRAM, but adapting its offer to the voice of the community raspberry is also available in options with 2 GB or 4 GB of memory.

The new Broadcom VideoCore VI layout supports H.265 (4K @ 60FPS), H.264 (1080p @ 60FPS and 1080p @ 30FPS) codecs and the OpenGL ES 1.1, 2.0, 3.0 library, making it possible to generate 4K (3840) × 2160) up to 60 frames per second (in the case of a single monitor connected, in the case of two monitors it is possible only 30 frames per second in 4K resolution).

Changes also occurred in the connection configuration. The computer has been equipped with 2 USB 2.0 ports and 2 USB 3.0 ports. Instead of full-size HDMI, two HDMI micro ports have been installed (there is an official microHDMI cable - HDMI for Raspberry Pi (white) ) that allow you to display the image in 4K and connect two screens at the same time. The computer was also equipped with a Gigabit Ethernet port at full speed of 1 Gb / s (in previous generations Ethernet used the USB 2.0 interface, which caused that its speed was limited).
| Raspberry Pi 3 Model B + | Raspberry Pi 4 model B | |
| SoC | Broadcom BCM2837B0 | Broadcom 2711 |
| CPU | 4 ARM Cortex-A53 1.4 GHz cores | 4 ARM Cortex-A72 1.5 GHz cores |
| GPU | Broadcom VideoCore IV | Broadcom VideoCore VI |
| RAM | 1GB LPDDR2 SDRAM | 2GB or 4 GB (depending on version) LPDDR4 SDRAM |
| Communication | Wifi 2.4GHz / 5.0GHz IEEE 802.11.b / g / n / ac, Bluetooth 4.2, BLE 4 x USB 2.0 ports Gigabit Ethernet with the use of USB 2.0 (up to 300 MPS) |
Wifi 2.4GHz / 5.0GHz IEEE 802.11.b / g / n / ac, Bluetooth 5.0 , BLE 2 x USB 2.0 / 2 x USB 3.0 Gigabit Ethernet |
| Video and sound | 1 x HDMI connection, 1 x MIPI DSI connector 1 x MIPI CSI connector 4-field audio / video output |
2 x micro HDMI (4K) 1 x MIPI DSI connector 1 x MIPI CSI connector 4-field audio / video output |
| Multimedia | H.264, MPEG4 (1080p30) H.264 (1080p30), OpenGL ES 1.1, 2.0 |
H.265 (4kp60) H.264 (1080p60) H.264 (1080p30), OpenGL ES 1.1, 2.0, 3.0 |
| SD card slot | Slot for microSD memory card (with installed system and as memory for data) | |
| Power |
5V / 2.5A DC (micro USB) |
5V / 3A DC (USB type C) 5V DC (GPIO) PoE |
Manufacturer
Responsible person
ZYBO Z7-10 (Zynq Board) is a set with a programmable system from the Xilinx Zynq-7000 - Z-7010 family. Educational offer. Digilent 410-351-10
No product available!
Module with minicamera based on IMX219 matrix with 8 MPx operation for Nvidia Jetson Nano, with 300 mm tape. ArduCAM B0185
No product available!
1 Mpx camera module with OV9281 sensor compatible with all versions of Raspberry Pi. The maximum video resolution is 1280×800 pixels. ArduCAM B0162
No product available!
13Mpx camera module with Sony IMX135 sensor compatible with all versions of Raspberry Pi. The maximum video resolution is 4192×3120 px. ArduCam B0163
No product available!
16 Mpx camera module with IMX298 sensor compatible with all versions of Raspberry Pi. The maximum video resolution is 4672×3496 pixels. ArduCAM B0174
No product available!
HAT designed for Raspberry Pi 3B+ and Raspberry Pi 4B minicomputers. HAT enables direct power supply of the minicomputer from the Ethernet port. The module is powered by 37 to 57 V, supplies 5V and 3A. ArduCam U6102
No product available!
5" LCD display with capacitive touch screen. Has HDMI output for image transmission and USB for touch screen. ArduCAM U6103
No product available!
Self-assembly case designed for the Odroid H2 computer. It allows you to conveniently mount the Odroid H2 computer and up to 2 SATA 3.5" drives. ODROID-H2 Case Type 1
No product available!
Self-assembly case designed for the Odroid H2 computer. It allows you to conveniently mount the Odroid H2 computer with additional cooling. ODROID-H2 Case Type 2
No product available!
Self-assembly case designed for the Odroid H2 computer. It allows you to conveniently mount the Odroid H2 computer and up to 2 SATA 2.5 "drives. ODROID-H2 Case Type 3
No product available!
Self-assembly case designed for the Odroid H2 computer. It allows you to conveniently mount the Odroid H2 computer and SATA 3.5" or SATA 2.5" drive. ODROID-H2 Case Type 4
No product available!
STM32 Nucleo starter pack for LoRa technology. It consists of two development kits: NUCLEO-L073RZ and NUCLEO-F746ZG and expansion modules for communication within LoRa: I-NUCLEO-LRWAN1 and LRWAN_GS_HF1. STMicroelectronics P-NUCLEO-LRWAN2
No product available!
No product available!
Arduino UNO set based on the ESP32 WiFi module. The module was designed for cooperation with Arducam 2 MPx and 5 MPx cameras. ArduCAM B0105
No product available!
Universal USB2.0 adapter for JTAG, UART and GPIO based on the FTDI FT2232H chip. The adapter card converts signals from USB2.0 to standard serial or parallel interfaces of embedded systems such as JTAG, SPI, I²C and UART. Compatible with Xilinx tools. Trenz TE0790-03
No product available!
Astro Carrier base plate attachment designed to work with the NVIDIA Jetson TX2i module. It has HDMI, USB 3.0 and USB 2.0, Ethernet as well as Mini PCIe and mSATA connectors. The overlay is plugged into the plate-to-board connector available on the Astro base plate. Connect Tech XBG206
No product available!
Starter kit containing Raspberry Pi 4B 4 GB and all necessary accessories: 32 GB microSD memory card with Rasberry Pi OS system, ruler, Ethernet cable and official accessories: housing, cooling kit, power supply and HDMI cable