- Out-of-Stock
ZL9ARM - base plate for dipARM modules with ARM LPC213x and LPC214x microcontrollers
ID: 20358
ZL9ARM - base plate for dipARM modules with LPC213x and LPC214x microcontrollers
The ZL9ARM set is a base plate for dipARM modules with LPC213x microcontrollers (ZL7ARM) and LPC214x (ZL10ARM). It is equipped with many classic peripheries that enable convenient testing of launched applications.
The basic properties of the set:
- socket for:
- dipARM module microcontroller LPC2131 (ZL7ARM)
- dipARM module microcontroller LPC2138 (ZL7ARM)
- dipARM module microcontroller LPC2142 (ZL10ARM)
- dipARM module microcontroller LPC2148 (ZL10ARM)
- USB socket - transmission is possible only with dipARM214x modules (ZL10ARM) - it is necessary to make a connection according to the instructions,
- MMC card connector,
- socket for connecting the UARTUSB converter (eg ZL1USB_A),
- an alphanumeric LCD display with 2x16 characters (4-bit mode),
- two RS232 interfaces,
- JTAG programming / debugging connector (eg ZL14PRG),
- connectors with derived microcontroller ports,
- 8 LEDs,
- 4 buttons,
- reset and INT1 interrupt buttons,
- potentiometric input voltage sensor for the A / D converter,
- NTC thermistor connected to the A / D converter input,
- 600mW audio amplifier (with volume control),
- piezoacoustic transducer,
- power supply: USB or 9 ... 12 VDC / VAC power supply,
- voltage stabilizers: 3.3 and 5 V,
The set includes:
- assembled base plate,
- CD-ROM (technical documentation of the set, LPC21xx microcontroller directory notes, IAP LPC2000 programming application Flash Utility, GCC C compiler, demo version of Keil uVision - limit to 16 kB, sample programs).
20358
You might also like
JTAG interface for microcontrollers with ARM core
zł42.39
24h
Available quantity: 26
Available
Cables for evaluation boards, set of 10 pcs., blue colour
zł5.20
Delivery date unknown
No product available!
Cables for evaluation boards, set of 10 pcs., red colour
zł5.20
24h
Available quantity: 381
Available
Cables for evaluation boards, set of 10 pcs., green colour
zł5.46
24h
Available quantity: 169
Available
LCD character display 2x16, 1x16 pin header for evaluation boards
zł39.90
24h
Available quantity: 56
Available
Available
Available
Available
Available
Module with digital thermal sensor, thermostat and I2C interface
zł19.90
24h
Available quantity: 189
Available
Available
Available
Available
Available
Cables for evaluation boards, set of 10 pcs., yellow colour
zł5.61
24h
Available quantity: 25
Available
Cables for evaluation boards, set of 10 pcs., white colour
zł6.06
24h
Available quantity: 13
Available
Set of 40 pieces of male-female connection cables, in various colors, 17 cm long. CAB_M-F (Rainbow-40-17)
zł5.68
24h
Available quantity: 655
Available
The BLE 4.0 Bluetooth module with the CC2541 system has an integrated PCB antenna and an extensive AES security system. Thanks to the built-in system CC2541 from Texas Instruments, it is possible to create a project without the use of an additional microcontroller. modCC2541
zł28.87
24h
Available quantity: 5
Available
RS-232 D-Sub (f) / D-Sub (m) cable, 2 m long. Akyga AK-CO-01
zł10.46
Delivery date unknown
No product available!
Keyboard module with 16 buttons in the form of a 4x4 matrix. Equipped with an 8-pin connector with 2.54 mm pitch
zł3.75
24h
Available quantity: 19
Available
Module with 16-channel PCF8575 IO expander controlled by the I2C interface. Equipped with a STEMMA QT connector. Adafruit 5611
zł29.99
24h
Available quantity: 3
Available
Audio amplifier module with three output channels. It can be powered from 12 to 24 V and has two 50 W outputs (left and right) and one 100 W output (bass). Equipped with Bluetooth 5.0 communication
zł114.78
Delivery date unknown
No product available!
The DS3231 RTC module for Raspberry Pi is a high-precision, battery-powered, I2C-communicating real-time clock that provides accurate timekeeping thanks to temperature compensation and a quartz resonator
zł27.90
24h
Available quantity: 391
Available
Other products in the same category (16)
A mains charger with a USB socket and a built-in type-C USB cable. The maximum current generated by the charger is 3.1 A. eXtreme NTC31CU
Retired
No product available!
WIFI-LPT100-B is a small module that enables communication using a wireless WiFi network. It has a UART interface, and is characterized by low energy consumption.
Retired
No product available!
5 megapixel camera module compatible with Coral Dev Board. Connects via the MIPI-CSI interface. Coral Camera
Retired
No product available!
Evaluation kit with i.MX 8M Mini Quad processor. It consists of a motherboard and a plate with an application processor plugged into the motherboard. The set has a WiFi module and Bluetooth 4.1 and a built-in chip antenna, connectors for display, audio and USB 3.0. NXP 8MMINILPD4-EVK
Retired
No product available!
EMMC Flash memory module for Hardkernel Odroid N2 computers. 8GB capacity, Android operating system installed. The set includes a microSD adapter. Hardkernel 8GB eMMC Module N2 Android
Retired
No product available!
EMMC Flash memory module for Hardkernel Odroid N2 computers. 8 GB capacity, installed Linux operating system. The set includes a microSD adapter. Hardkernel 8GB eMMC Module N2 Linux
Retired
No product available!
No product available!
A NFC-compatible Raspberry Pi expansion kit with integrated antent. It has the ability to work in reader mode, P2P
and card emulation mode. NXP PN7150
Retired
No product available!
BGA balls with a diameter of 0.35 mm and composition Sn63 / Pb37. The ampoule contains 10,000 pieces.
Retired
No product available!
BGA balls with a diameter of 0.3 mm and composition Sn63 / Pb37. The ampoule contains 10,000 pieces.
Retired
No product available!
Speaker cable, two-core with a cross section of 1 mm2, black and red, PVC insulation. Price per meter. TASKER TSK53
Retired
No product available!
Speaker cable, two-core, 0.75 mm2 cross section, black and red, PVC insulation. Price per meter. TASKER TSK52
Retired
No product available!
Tin Sn60Pb40 with flux (100 g spool), diameter 0.38 mm. Cynel LC60-0.38/100
Retired
No product available!
FPGA starter kit with Intel Stratix 10 GX. The module has integrated transceivers that transfer data at speeds up to 28.3 Gb/s, making DE10-Pro fully compatible with version 3.0 of the PCI Express standard. The DE10-Pro offers fast parallel Flash memory and four SO-DIMM slots that support DDR4 SDRAM options. Terasic P0626
Retired
No product available!
FPGA starter kit with Intel Stratix 10 GX. The module has integrated transceivers that transfer data at speeds up to 28.3 Gb/s, making DE10-Pro fully compatible with version 3.0 of the PCI Express standard. The DE10-Pro offers fast parallel Flash memory and four SO-DIMM slots that support DDR4 SDRAM options. Terasic DE10-Pro-GX-280-8G (P0626)
Retired
No product available!
XTREME DT830B multimeter enabling constant voltage measurement in the range of 200 mV - 500 V, alternating voltage 200 - 500 V, direct current 200 μA - 5 A and resistance 200 Ω - 2 MΩ. DT830B XTREME
Retired
No product available!
ZL9ARM - base plate for dipARM modules with LPC213x and LPC214x microcontrollers