- Out-of-Stock
PmodSTEP
ID: 204257
Stepper Motor Driver, Digilent, RoHS
PmodSTEP
Stepper Motor Driver, Digilent, RoHS
The Digilent PmodStep™ is designed to provide an easy means to drive a stepper motor using any host board with a 12-pin Pmod connector.
The PmodStep contains a push-pull four channel driver, capable of driving up to 600 mA of current per channel. The PmodStep has eight digital I/O signals on header J1, all of which are connected to indication LEDs to show the current states of the signals. Four of the signals are used to control the stepper motor driver. The PmodStep can be powered either from Vcc on the microcontroller board, or alternatively, from the external power screw terminal block.
Key Features:
- Locking, keyed headers for interfacing with both 4 and 6-pin stepper motors
- Signal headers for easy viewing of digital I/O signals from the host board
- Can be powered externally or by the host board
- Signal status & power LEDs
Download:
Code: 210-267
204257
Data sheet
- Output current
- 0.6A
- Number of channels
- 2
- Supply voltage min
- 4,5 V
- Supply voltages max
- 36 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
DRV8825 Stepper Motor Driver Carrier is a DRV8825 stepper motor driver that allows you to supply a bipolar current of up to 1.5 A per phase, without using a heat sink. The system can be supplied with voltage up to 45V, in the set there is a heat sink. Polol 2133
zł59.30
24h
Available quantity: 1
Available
DRV8825 Stepper Motor Driver Carrier with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. Pololu 2982
zł71.91
24h
Available quantity: 1
Available
A4988 Stepper Motor Driver Carrier with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. Pololu 2981
zł45.10
24h
Available quantity: 2
Available
A4988 Stepper Motor Driver Carrier with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. Pololu 2980
zł43.76
24h
Available quantity: 2
Available
Simple to use stepper motor driver, compatible with anything that can output a digital 0..5V pulse or 0..3.3V pulse. Connect a 4-wire stepper motor and a microcontroller and you’ve got precision motor control! EasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors. ROB-12779
zł87.16
Delivery date unknown
No product available!
Black Edition offers adjustable current limiting, over-current and over-temperature protection, and five different microstep resolutions. It operates from 8 V to 35 V and can deliver up to 2 A per coil with sufficient additional cooling. Pololu 2128
zł39.90
24h
Available quantity: 1
Available
This is a breakout board for ON Semiconductor’s AMIS-30543 microstepping bipolar stepper motor driver, which features SPI-adjustable current limiting, 11 step modes (from full-step through 1/128-step), back-EMF feedback that can be used for stall detection or optional closed-loop control, and over-current and over-temperature protection.
zł98.82
24h
Available quantity: 1
Available
The Tic T825 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC).
zł170.43
24h
Available quantity: 1
Available
The Tic T825 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC).
zł172.99
Delivery date unknown
No product available!
The Tic T834 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC).
zł287.59
24h
Available quantity: 3
Available
The Tic T834 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC).
zł172.99
Delivery date unknown
No product available!
The stepper motor driver with the MP6500 system allows the bipolar motor to be supplied with current up to 1.5 A per phase, without the use of a heat sink. The system can be supplied with voltage in the range 4.5 ... 35 V. Pololu 2966
zł47.98
24h
Available quantity: 1
Available
MP6500 Stepper Motor Driver Carrier, Digital Current Control
zł44.44
24h
Available quantity: 1
Available
Tic T500 USB Multi-Interface Stepper Motor Controller
zł131.23
24h
Available quantity: 1
Available
Tic T500 USB is a stepper motor driver based on the MP6500 chip. It allows you to control the stepper motor whose voltage on the coil is 4.5-35V, the maximum current per coil is up to 1.5A. The controller can be controlled by: USB, TTL, I2C, RC (PWM model) etc. Pololu 3134
zł142.07
24h
Available quantity: 2
Available
Module with a stepper motor driver based on the DRV8434A system. It allows the bipolar motor to be supplied with current up to 1.2 A per phase and with a voltage from 4.5 V to 45 V. Communication via the SPI interface. Pololu 3767
zł58.84
Delivery date unknown
No product available!
Other products in the same category (16)
AVT kit for self-assembly of the comfortable direction indicator module. AVT1945 B
Retired
No product available!
Assembled module of comfortable direction indicators. AVT1945 C
Retired
No product available!
The camera V3 module is specifically designed for Banana Pi M3. Includes two CMOS sensor modules: OV5640 (5M Pixel) and OV8865(8M Pixel)
Retired
No product available!
Pin strip straight in blue, single-row, extended, female, 1x8, pitch 2.54mm, THT, RoHS. PB10S L BLUE
Retired
No product available!
Pin strip straight in blue, single-row, extended, female, 1x8, pitch 2.54mm, THT, RoHS. PB08S L BLUE
Retired
No product available!
2x16 display with LED backlight (Yellow / Green). The height of the 9.66mm mark (BIG). ECO - low power consumption; only 30mA (including backlight), 2-LED backlight
Retired
No product available!
Orange Pi ABS Transparent Protective Case for Orange Pi Plus 2
Retired
No product available!
Replacing the 10/100 Ethernet port with onboard 802.11 b/g/n 2.4GHz WiFi and Bluetooth, the popular open source BeagleBone Black computer now comes with built-in wireless networking capability. Leveraging a partnership with Octavo Systems and designed in CadSoft Eagle, BeagleBone Black Wireless is the easiest to use and modify credit-card sized IoT Linux computer available. BBBWL-SC-562
Retired
No product available!
The Wireless Connectivity Cape offers advanced Wi-Fi features that support Extended Range, High Throughput, Wi-Fi Direct Multi-Channel, Multi-Role and SmartConfigTM technology while also supporting Bluetooth 4.0 with BLE. BBONE-GATEWAY-CAPE
Retired
No product available!
Pin strip straight in blue, single-row, extended, female, 1x6, pitch 2.54mm, THT, RoHS. PB06S L BLUE
Retired
No product available!
Expansion card dedicated for sets from the Terasic DE FPGA series. It contains mainly elements necessary for communication (Wi-Fi module and Bluetooth) and sensors (light, humidity, temperature, accelerometer, gyroscope and magnetometer). The built-in UART <> USB converter enables communication with a PC. Terasic P0499
Retired
No product available!
Module with a light sensor based on the APDS-9002 system. With the aid of this system, it is possible to measure the intensity of illumination in lux. The module has a connector in accordance with the Grove standard. Seeed studio 101020076
Retired
No product available!
Module with SSR S208T02 relay with a load up to 4 A. The board is equipped with a Grove connector and is controlled by a digital input. Seeed Studio 103020004
Retired
No product available!
Module with a reed relay BR-500Ω with a load up to 0.5 A. The board is equipped with a Grove connector and is controlled by a digital input. Seeed Studio 103020014
Retired
No product available!
Module with a 3-axis gyroscope (ITG 3200 system). The measuring range is ± 2000 ° / s. The I2C interface is used for communication. The module has a low power consumption (typically 6.5 mA). The module has a connector in accordance with the Grove standard. Seeed studio 101020050
Retired
No product available!
Module module with ADC121C021 12-bit converter. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 103020013
Retired
No product available!
Stepper Motor Driver, Digilent, RoHS