- Out-of-Stock
DFRobot - Memory Metal Actuator - NM70R (2P)
ID: 209418
(FIT0258) Memory Metal Actuator - NM70R (2P)
DFRobot - (FIT0258) Memory Metal Actuator - NM70R (2P)
Introduction
Shape Memory metals that were developed by NASA for the space industry, and have been used for increasing applications down on earth.For example,there have been limited studies on using these materials in robotics. They make it possible to create very light robots.
Tiny, silent, and lightweight at just 4.2 grams, NanoMuscle Rotary shape memory alloy actuators provide 60°of rotation using a linear NM70-Super memory metal actuator encapsulated in a body with a spring-loaded, cam-action rotary output. The NanoMuscle Rotary actuators come in two different versions: the 2-pin NM70R-2P, and the 6-pin NM70R-6P. The -2P actuator ‘bounces’ between limit stops when connected to a power source, and the -6P provides greater control, with access to end limit sensors, and can be driven by the MADv5 (sold separately). Operating voltages are ~3-9V. Refer to the Downloads page for additional details.
Application
- Automotive
- Bi-directional grill louver mechanism
- Fuel tank door release mechanism
- Trunk, glove compartment release mechanism
- Consumer
- Memory card ejector
- Electronic latch release
- Security doors and locks
- Biometric sensor assist
- Hobby/Miscellaneous
- Grasping device
- Undersea Core Sampling Robot
- Point Of Use sale items
- Latch release for ROVs
- Pneumatic actuator replacement
Specification
- Operating voltages: 3-9v
- Rotation up to 60 degrees in either direction
- 2 pin version gives you direct on/off control
- Simply apply 3-6V at 350mA and the rotary will turn
- Size: 50x10x15mm
- Weight: 4.2g
Shipping List
- Memory Metal Actuator - NM70R(2P) 1 unit
Documents
209418
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
A pin expander designed for Raspberry Pi boards. It is equipped with a standard 40-pin connector for connecting a minicomputer and two sets of 2x20-pin outputs for connecting expansion modules. Pimoroni PIM511
Retired
No product available!
Extension module for Raspberry Pi. The board has 7 RGB LEDs, four 14-segment displays, three single-color LEDs, as well as three touch buttons, a BMP280 sensor and a buzzer. Pimoroni PIM242
Retired
No product available!
Module with 6 5x7 LED matrix displays designed to work with the Raspberry Pi. It uses IS31FL3730 drivers and communicates via the I2C interface. Pimoroni PIM187
Retired
No product available!
Module with 6 5x7 LED matrix displays designed to work with the Raspberry Pi. It uses IS31FL3730 drivers and communicates via the I2C interface. Pimoroni PIM187
Retired
No product available!
A module with 5 buttons and an RGB diode, designed to work with the Raspberry Pi. The buttons are connected to the minicomputer through the GPIO expander controlled by the I2C interface. Pimoroni PIM301
Retired
No product available!
Kit for controlling soil moisture of cultivated plants. It contains the HAT Mini module, soil moisture sensors and pots and seeds of herbs: basil, coriander and rosemary. Pimoroni PIM518
Retired
No product available!
Kit for controlling soil moisture of cultivated plants. It contains the HAT Mini module, soil moisture sensors and pots and seeds of chilli. Pimoroni PIM519
Retired
No product available!
A module with a spectrum sensor that operates in the visible light range (450-650 nm). It allows you to measure and characterize a light source or check how the tested surface absorbs or reflects light at specific wavelengths. Pimoroni PIM412
Retired
No product available!
Module with a UV ultraviolet light sensor VEML6075. It enables measurement of the level of UVA (350-375 nm) and UVB (315-340 nm) radiation. It communicates via the I2C bus. Pimoroni PIM460
Retired
No product available!
Module with 6-axis IMU motion sensor that combines a 3-axis accelerometer and a 3-axis magnetometer in one system. It communicates via the I2C bus. Pimoroni PIM376
Retired
No product available!
Module with two 5x7 LED matrix displays designed to work with the Raspberry Pi. It uses IS31FL3730 drivers and communicates via the I2C interface. Pimoroni PIM527
Retired
No product available!
Module with two 5x7 LED matrix displays designed to work with the Raspberry Pi. It uses IS31FL3730 drivers and communicates via the I2C interface. Pimoroni PIM526
Retired
No product available!
The system of a practical clock with an extremely simple design is equipped with a readable LED display, an alarm clock with a snooze function, and battery backup of the clock operation after a power failure
Retired
No product available!
Kit with DA7280 vibration motor driver module and LRA (Linear Resonant Actuator) motor. It allows you to add vibration feedback from the device to the project. SparkFun ROB-18247
Retired
No product available!
No product available!
The Winstar WEH001602ABPP5N00100 OLED display is a character display with dimensions of 80×36×10 mm, capable of displaying 16 characters on 2 lines. It comes with a built-in WS0010-TX controller and operates within a power supply voltage range of 4.8–5.3 V and temperature range of -40°C to 80°C, offering excellent readability thanks to OLED technology.
Retired
No product available!
(FIT0258) Memory Metal Actuator - NM70R (2P)