- Out-of-Stock
zł971.80
DFRobot-7"Display for RPI, MK802, Cubieboard
ID: 232846
(FIT0326) 7" Diagonal - 1280x800 IPS HDMI/VGA/AV Display
(FIT0326) 7" Diagonal - 1280x800 IPS HDMI/VGA/AV Display
INTRODUCTION
So you have a Raspberry Pi, a MK802 series or a Cubieboard? Cool. You hacked it and had it working as a mini pc? Cooler. But wait, a computer has a screen, literally. Why not try a beatutiful 7" diagonal-1280x800IPS HDMI/VGA/AV display? Connect a HDMI cable or pluging in directly the MK802(shown in picture) can make it work quickly.
A power adapter is needed for this cute monitor.It could be 5~24V(2A will be better). Whatsmore, the driver board can drive screens between 4.3" and 15", the singal will take the full screen when the resolution ratio is 1280X720. And if you still havnt got any friendly monitor for your project,just try it!
Note: Raspberry not included!!
APPLICATIONS
- Raspberry Pi/MK802/MK802IIIs/Cubieboard2 Display
- Custom Embeded system based on Mini PC
SPECIFICATION
- 7" screen
- 5-18V 2A Power Supply is needed
- VGA/HDMI display while HDMI must be 50pin RGB or LVDS
- Screens from 4.3" to 15" of 3.3V which use LVDS ports can be drived by the driver board
- Five buttons for you to set your screen or reset
- Raspberry Pi & MK802 & Cubieboard2 & PC display
- External dimension:161.2x105.5mm
- Display dimension: 150.72X94.2mm
- Visual Angle:89/89/89/89(all angles)
- Scan frequency: 60Hz
- Illuminant kind:WLED
- Resolution:1280x800
- Panel brightness:400cd/m2
PACKAGE INCLUDES
- 7"screen x1
- multifunction board x1
- LVDS adapter and 30P FFD flat cable x1
- 5 buttons board x1
- Wall Adapter Power Supply 7.5V DC 1A (American Standard)
DOWNLOAD
232846
Data sheet
- Screen type
- IPS
- Diagonal (inch)
- 7
- Resolution
- 1280 x 800 px
- Interface
- HDMI/VGA
- Touch
- No
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
DFR0275
zł208.84
24h
Available quantity: 4
Available
3.5 inch Touch Screen TFT LCD Designed for Raspberry Pi, 320×480 resolution. Waveshare 3.5inch RPi LCD (A)
zł94.77
24h
Available quantity: 3
Available
5 inch Resistive Touch Screen LCD, HDMI interface, supports various systems
zł167.67
24h
Available quantity: 5
Available
7 inch Capacitive Touch Screen LCD, HDMI interface, supports various systems. For Raspberry Pi (B, A+, B+, 2), Banana Pi, Banana Pro, BeagleBone Black
zł189.00
24h
Available quantity: 4
Available
5inch HDMI LCD (B) + Bicolor case
zł188.30
24h
Available quantity: 2
Available
800×480, 7 inch Capacitive Touch Screen LCD, HDMI interface, supports various systems + Bicolor case
zł206.30
24h
Available quantity: 1
Available
Other products in the same category (16)
Mains power supply 5V, 3A, cable with micro-USB plug. It can be used as a power supply or charger of any device equipped with micro-USB sockets
Retired
No product available!
At the Feather 32u4\'s heart is at ATmega32u4 clocked at 8 MHz and at 3.3V logic. 32K of flash and 2K of RAM, with built in USB so not only does it have a USB-to-Serial program & debug capability built in with no need for an FTDI-like chip, it can also act like a mouse, keyboard and USB MIDI device. Adafruit 3027
Retired
No product available!
No product available!
Pre-installed Ubuntu 16.04 or latest version. eMMC Version 5.0 interface or higher version from Samsung. JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode. The eMMC chipset is only compatible with Amlogic S905 and S805 series(ODROID-C1+ / C0 / C2)
Retired
No product available!
Pre-installed Android5.x or latest version. eMMC Version 5.0 interface or higher version from Samsung. JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode. The eMMC chipset is only compatible with Amlogic S905 and S805 series(ODROID-C1+ / C0 / C2)
Retired
No product available!
Pre-installed Ubuntu 16.04 or latest version. eMMC Version 5.0 interface or higher version from Samsung. JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode. The eMMC chipset is only compatible with Amlogic S905 and S805 series(ODROID-C1+ / C0 / C2)
Retired
No product available!
Pre-installed Ubuntu 16.04 or latest version. eMMC Version 5.0 interface or higher version from Samsung. JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode. The eMMC chipset is only compatible with Amlogic S905 and S805 series(ODROID-C1+ / C0 / C2)
Retired
No product available!
Pre-installed Android5.x or latest version. eMMC Version 5.0 interface or higher version from Samsung. JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode. The eMMC chipset is only compatible with Amlogic S905 and S805 series(ODROID-C1+ / C0 / C2)
Retired
No product available!
Pre-installed Ubuntu 16.04 or latest version. eMMC Version 5.0 interface or higher version from Samsung. JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode. The eMMC chipset is only compatible with Amlogic S905 and S805 series(ODROID-C1+ / C0 / C2)
Retired
No product available!
A module with a color and gesture sensor based on the APDS-9960 chip. It can detect simple hand gestures, RGB colors and measure ambient light. DFRobot SEN0187
Retired
No product available!
Power Supply 2.5A 5.1V for Raspberry Pi 3 model B - STONTRONICS T5875DV
Retired
No product available!
Pre-installed Ubuntu 14.04 or latest version. eMMC Version 5.0 interface or higher version from Samsung.
JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode
Retired
No product available!
No product available!
No product available!
Pre-installed Ubuntu 14.04 or latest version. eMMC Version 5.0 interface or higher version from Samsung.
JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode
Retired
No product available!
Pre-installed Android 4.x or latest version. eMMC Version 5.0 interface or higher version from Samsung.
JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode
Retired
No product available!
(FIT0326) 7" Diagonal - 1280x800 IPS HDMI/VGA/AV Display