Zumo 32U4 Robot Kit - a kit for building a minisumo robot (without motors, for assembly)

Our offer includes a newer version of the set with an OLED display:

Zumo 32U4 OLED Robot Kit - a kit for building a minisumo robot (without motors, for assembly)

Description

A set for building a minisumo class robot from Pololu based on a tracked chassis. Dimensions (approx. 100 mm x 100 mm) and weight (approx. 300 g with batteries and controller) allow the robot to be used as a minisumo platform in popular competitions for pupils and students organized around the world.

The robot requires two DC Micro Pololu motors to drive the tracks. Zumo 32U4 has two motor controllers with an H bridge and a number of integrated sensors, including a pair of quadrature encoders for closed-loop motor control, a complete inertial measurement unit (3-axis accelerometer, gyroscope and magnetometer), five reflection sensors for detecting lines or edges, and proximity sensors directed forward and side to detect obstacles and determine the distance. Three on-board buttons offer a convenient user input interface, while the LCD, buzzer and LEDs signal the robot feedback.

The robot has a built-in microcontroller with an Arduino Leonardo compatible bootloader. As a result, the programming process of the robot does not require an additional programmer, and the controller is programmed via the USB port.

The robot has extensive support in the form of Arduino libraries for all systems available on the board. It is also available in a version with motors as a set with a complex robot in a version with 50:1, 75:1 and 100:1 gear motors.

Features

• Two DC Micro Pololu motors with gears (not included)
• Matrix with IR reflective sensors for line and edge detection (not included)
• Two single-channel DRV8838 motor controllers
• Piezoelectric buzzer
• LSM303D 3-axis digital accelerometer and magnetometer
• L3GD20H 3-axis digital gyroscope
• 3.3V and 5V stabilizer
• Prototype area for the user
• Arduino libraries
• Power supply: 4 x AA battery (not included)
• Dimensions: 98 x 98 x 39 mm
• Weight: 170 g (without batteries)

Kit contains

• Zumo Chassis Kit, which includes:
  • Zumo chassis main body
  • two drive sprockets
  • two idler sprockets
  • two 22-tooth silicone tracks
  • two shoulder bolts with washers and M3 nuts
  • four 1/4″ #2-56 screws and nuts
  • battery terminals
• Zumo 32U4 Main Board, which includes:
  • two 1×2 machine pin sockets for IR LEDs
  • buzzer
  • 2×7 low-profile male header for LCD
  • jumper wires (for soldering motors to the main board)
  • two magnetic encoder discs (12 CPR)
  • 2×12 female header for front sensor array
  • four 3/16″ #2-56 screws and nuts
• Zumo 32U4 Front Sensor Array, which includes:
  • 2×12 extended male header for sensor array
  • two 1×3 right-angle male headers and two shorting blocks – jumpers for sensor array
  • two wide-angle and two narrow-angle through-hole infrared LEDs (these plug into the main board and serve as forward emitters for the proximity sensor detectors located on the front sensor array)
• Zumo 32U4 Blade, which includes
  • forward IR emitter LED holder
  • two 3/16″ #2-28 thread-forming screws for LED holder
• 8×2 character LCD