- Out-of-Stock
Pololu 12V 4.4: 1 HP engine with 48 CPR 25Dx48L mm encoder
ID: 562780
Pololu engine with 48 CPR encoder, with 4.4: 1 transmission, standard 12 V voltage and 2250 rpm. Pololu 3213
Description
These motors have an encoder thanks to the noise they can be used in projects in which it is important to know the speed or the distance traveled. The recommended operating voltage is 12 V and at such a voltage the motor has a speed of 2250 rpm, 300 mA without load and 5.6 A at blocking. The torque for this engine is 1.7 kg * cm (0.166 Nm). The motor shaft is D-shaped and 4 mm in diameter. The motor length is 60 mm and the diameter is 25 mm.
Description of leads
| Colour | Function |
|---|---|
| Red | Motor supply |
| Black | Motor supply |
| Green | GND encoder |
| Blue | Vcc encoder (3.5..20 V) |
| Yellow | Output A of the encoder |
| White | Output B of the encoder |
properties
- Operating voltage: 12 V
- Gearbox: 4.4: 1
- Speed: 2250 rpm
- Current: 300 mA (no load), 5.6 A (blocked)
- Torque: 1.7 kg * cm (0.166 Nm)
- D-shaped shaft
- Diameter 25 mm
- Length 60 mm
- Weight: 95 g
Recommended accessories
562780
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Dual VNH3SP30 Motor Driver Carrier MD03A
zł1,136.89
24h
Available quantity: 2
Available
Adapter that allows you to easily mount the wheels on a motor with a shaft diameter of 4 mm using screws size 4-40. The hub fits both round and D-shaped shafts. Pololu 1081
zł41.17
24h
Available quantity: 2
Available
Pololu Universal Aluminum Mounting Hub for 4mm Shaft, M3 Holes (2-Pack)
zł45.31
24h
Available quantity: 1
Available
A set of adapters (adapter) from the popular 4 mm to 12 mm motor shaft, wheel holders from RC models. Pololu 2684
zł31.24
24h
Available quantity: 2
Available
These aluminum gearmotor brackets let you securely mount Pololu’s 25D mm metal gearmotors to your project. The brackets are sold in pairs, and each bracket includes two M3 screws for securing the motor to the bracket. Each bracket also features seven mounting holes and twelve mounting slots for M3 or #4-size screws (not included), giving you a variety of mounting options.
zł50.41
24h
Available quantity: 3
Available
Other products in the same category (16)
T-Cobbler Plus - adapter enabling connection of GPIO Raspberry Pi A +, B + and Pi 2 lines to the contact plate (2.54 mm). Goldpin connectors are included, for self-assembly. Adafruit 1989
Retired
No product available!
FPC tape length 250 mm, 50 lines, pitch 0.5 mm. Adafruit 1682
Retired
No product available!
μHex is the first low-power controller which is compatible with Arduino. It is very suitable for the battery power supply environment. A 210mAh CR2032 cell battery could make it work 60 days long. DFR0343
Retired
No product available!
The Leonardo ETH is a microcontroller board based on the ATmega32U4 and the new W5500 TCP/IP Embedded Ethernet Controller (datasheet).
Delivery date unknown
No product available!
The DE0-Nano-SoC Development Kit presents a robust hardware design platform built around the Altera System-on-Chip (SoC) FPGA, which combines the latest dual-core Cortex-A9 embedded cores with industry-leading programmable logic for ultimate design flexibility
Retired
No product available!
Ribbon Cable, IDC Socket, IDC Socket, 40 Ways, 5.91 ", 150 mm, 2.54 mm
Retired
No product available!
No product available!
No product available!
FRAM memory with a capacity of 4kbit by Cypress Semiconductor, communicates via the I2C bus, the power supply voltage is in the range 2.7 - 3.6V. The system has an SOIC8 housing
Retired
No product available!
A small Li-Pol battery with a nominal voltage of 3.7 V and a capacity of 1350 mAh. Leaded wires, dimensions: 5 x 37 x 59 mm. Akyga LP503759
Retired
No product available!
Thermistor for THT assembly with a resistance of 10k, a temperature coefficient of 3380K and accuracy of 1%. The sensor body is Ø2.5x4mm
Delivery date unknown
No product available!
KAmduino UNO is a development board with functionality and dimensions typical for Arduino UNO. Thanks to the built-in ATmega328P microcontroller and the FT231X chipset, the board can be programmed via a USB interface using the Arduino environment. KAmduino UNO
Retired
No product available!
K64 microcontroller with ARM® Cortex®-M4 core, 1MB Flash memory, 256kB RAM, 120MHz, SPI, I2C, I2S, UART, CAN, USB OTG, ADC, DAC, RTC, DMA, LQFP100
Retired
No product available!
SmartLED Shield driver (V4) for SmartMatrix series displays, for use with Teensy 3.2, Teensy 3.5 and Teensy 3.6. It is also possible to connect LED Dotstar or APA102 displays. Adafruit 1902
Retired
No product available!
Add motion, direction and orientation sensing to your wearable FLORA project with this high precision 9-DOF sensors: 3-axis accelerometer, 3-axis magnetometer and 3-axis gyroscope. Adafruit 2020
Retired
No product available!
Ambient Light Sensor, SI1145, connects to the I2C bus pads. Adafruit 1981
Retired
No product available!
Pololu engine with 48 CPR encoder, with 4.4: 1 transmission, standard 12 V voltage and 2250 rpm. Pololu 3213