- Out-of-Stock

NVIDIA development kit with NVIDIA Carmel ARMv8.2 CPU and NVIDIA Volta graphics consisting of 384 cores supporting CUDA technology and 48 Tensor cores. The system is supported by DDR4 RAM with a capacity of 8 GB, Ethernet interface, DisplayPort, HDMI and MIPI-CSI camera connectors.
The package offers performance in the field of accelerated calculations of up to 21 TOPS, thanks to which it can simultaneously run modern neural networks and process data from many high resolution sensors. 384 NVIDIA CUDA cores, 48 Tensor cores, 6 Carmel ARM CPU cores and two NVDLA engines (NVIDIA deep learning accelerators) combined with over 51 GB/s memory bandwidth, video encoding and decoding make Jetson Xavier NX the first choice platform for embedded and edge systems.
Jetson Xavier NX supports many power consumption modes, including low power modes for battery powered systems. However, this does not cause a significant decrease in performance, so it can still be used to support sensors and peripherals, while allowing the use of the entire stack of NVIDIA software. The set comes with a 19 V power supply (9 to 20 V power supply required), which allows the module to be powered at maximum computational load. In the default mode, the device consumes 10 W, in the mode of increased power consumption 15 W.
Jetson Xavier NX is the perfect solution for high-performance AI systems, such as commercial robots, medical devices, intelligent cameras, high resolution sensors, automated optical inspection systems and other embedded AIoT systems.
The manufacturer offers extensive support in the form of numerous examples and documentation. More information can be found, among others on the product Wiki page.
Jetson Xavier NX module
Carrier board
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Gold-plated HDMI (M) - HDMI (M) cable with 3m length, RoHS
High quality 8 megapixel Sony IMX219 image sensor custom designed add-on board for Raspberry Pi, featuring a fixed focus lens. It\'s capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60, and 640x480p90 video
The popular micro SDHC format, used in smartphones, tablets and cameras. Class 10 product with a UHS-I interface from Goodram. Reading speed: up to 60 MB / s, write: up to 15 MB / s
Camera for Raspberry Pi minicomputers. Works with all versions of minicomputers with a CSI socket. The camera is equipped with a Sony IMX477R sensor with a resolution of 12.3MPx and a built-in IR filter. Raspberry Pi HQ Camera
No product available!
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
PCB and programmed circuit for automatic power switch for car installation. AVT1877 A +
No product available!
No product available!
No product available!
No product available!
No product available!
Pre-installed Ubuntu 14.04 or latest version. eMMC Version 5.0 interface or higher version from Samsung.
JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode
No product available!
No product available!
ROSA3D filament made of high-quality PLA-Silk granules characterized by intense color and exceptional gloss. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. Filament ROSA3D PLA-Silk Fuchsia
No product available!
The minicomputer with the Intel Celeron J4115 quad-core processor (2.5 GHz, 64-bit) has 2 slots for DDR4 RAM modules. Additionally, it is equipped with, among others: Gigabit Ethernet, HDMI 2.0 port and Display Port 1.2 4K/60Hz, four USB sockets, 24 GPIO, PCI-e slot, two SATA3 connectors. Rev-B+. ODROID H2+
No product available!
PCB and pre-programmed system for LED controller controlled by any remote control. AVT3133 A +
No product available!
Camera module 18 Mpx with AR1820HS sensor working with Raspberry Pi. It offers a video resolution of up to 4912x3684 pixels at 15 fps. ArduCAM B0164
No product available!
No product available!
No product available!
No product available!
Male terminal block, angled, 4-pin. Pitch 3.5mm. Height 9.2mm. KF2EDGR
No product available!
PCB for an economic logarithmic probe. AVT1962 A
No product available!
NVIDIA kit with NVIDIA Carmel ARMv8.2 CPU and NVIDIA Volta graphics. It has DDR4 8GB RAM memory, Ethernet interface, DisplayPort, HDMI and MIPI-CSI camera connectors. 945-83518-0005-000