- Out-of-Stock
Grove Triple Color E-Ink Display - module with 3-color e-Paper 2.13" 212x104
ID: 583163
5906623416400
Module with a 3-color (red, black, white) e-Paper display with a diagonal of 2.13" and a resolution of 212x104 px. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 104020130
Description
Module with a 3-color (red, black, white) e-Paper display with a diagonal of 2.13" and a resolution of 212x104 px. It has the ability to display content with a two-level gray scale. Built-in STM32 microcontroller performs communication via UART interface. E-Paper displays are characterized by high contrast of the displayed image and consume power only when the displayed content is changed. The board is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. Full documentation of the module with examples of use is available on the product page.
Features
- Diagonal: 2.13"
- Resolution: 212x104 px
- Display color: red, black, white
- Gray levels: 2
- Interface: UART (baudrate 230400)
- Pixel size: 0.229 × 0.228
- Viewing angle:> 170 °
- No backlight, display the last content after power off
- Low energy consumption
- Supply voltage: 3.3 V or 5 V
- Working temperature: 0 to 40 ℃
- Working humidity: 40 to 70% RH
- Dimensions: 68 x 30 mm
583163
Data sheet
- Screen type
- E-Ink/Epaper
- Diagonal (inch)
- 2,13
- Resolution
- 212 x 104 px
- Interface
- UART
- Touch
- No
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.57
24h
Available quantity: 97
Available
A set with ATmega2560 microcontroller (256 kB Flash, 8 kB RAM, 4 kB EEPROM) clocked at 16 MHz. The user has, among others: 54 I / O lines, 14 PWM channels, 16 analog inputs. Arduino A000067
zł189.00
24h
Available quantity: 219
Available
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 23
Available
The expansion module is designed for Arduino Mega and Google ADK boards. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103020027
zł27.36
24h
Available quantity: 3
Available
Other products in the same category (16)
Alphanumeric display 16 characters in two rows, content black, green background with backlight.
Retired
No product available!
4x20 LCD display with blue backlight, equipped with English and Japanese character generator. Artronic LCD-PC-2004A-BLW-W/B E12
Retired
No product available!
Alphanumeric display 16 characters in one row, content white, blue background with backlight.
Retired
No product available!
Evaluation board with high voltage SMPS ALTAIR05T-800 SMPS switch / controller. The board is equipped with a 5W (5V / 1A) power charger with a wide voltage range and constant current. STMicroelectronics EVLALTAIR05T-5W
Retired
No product available!
Quectel MC60 is a module that combines GSM / GPRS / GNSS and BT 3.0 technologies. It is available in a small, easy to sold LCC housing and has a low power consumption of up to 1.2 mA. Quectel MC60
Retired
No product available!
Universal USB2.0 adapter for JTAG, UART and GPIO based on the FTDI FT2232H USB2 IC. The adapter card converts signals from USB2.0 to standard serial or parallel interfaces of embedded systems such as JTAG, SPI, I²C and UART. Compatible with Xilinx tools. Trenz TE0790-02
Retired
No product available!
ZYBO Z7-20 (Zynq Board) is a set with a programmable system from the Xilinx Zynq-7000 family - Z-7020. Digilent 410-351-20
Retired
No product available!
CBRPP-TS-BLK / WHT is a housing housing a 7 "Raspberry Pi touch screen and Raspberry Pi B +, Pi 2 or Pi 3 tiles. The housing is made of high impact polystyrene (HIPS). CBRPP-TS-BLK / WHT
Retired
No product available!
The P-NUCLEO-IOM01M1 is an STM32 Nucleo pack composed of the STEVAL-IOM001V1 and the NUCLEO-F446RE board. The STEVAL-IOM001V1 is a single IO-Link master PHY layer (L6360) while the NUCLEO- F446RE runs an IO-Link stack rev 1.1
Retired
No product available!
The P-NUCLEO-IOD01A1 is an STM32 Nucleo pack composed of the NUCLEO-L073RZ development board, the STEVAL-IOD003V1 evaluation board and the X-NUCLEO-IKS01A2 expansion board
Retired
No product available!
Asus Tinker Board S is a mini-computer with a powerful ARM Cortex A17 Quad-Core RK3288 32-bit 1.8 GHz processor. It has 2 GB of LPDDR3 RAM, integrated graphics processor, 16 GB eMMC memory, Gigabit Ethernet port, Bluetooth, WiFi, HDMI 2.0 (4K), 4 x USB 2.0, 40 GPIO, microSD card connectors, miniJack 3.5 mm, S / PDIF and CSI and DSI connectors.
Retired
No product available!
The P-L496G-CELL01 STM32 discovery pack for 2G/3G cellular to cloud (STM32-C2C/2G-3G) is a turnkey development platform for cellular and cloud technology based solutions
Retired
No product available!
Image sensor MT9M114 with a resolution of 1.26 MPx with built-in NXP LPC4330 processor. Designed for AI applications, it allows for color recognition, line detection and barcode detection. DFRobot SEN0265
Retired
No product available!
Mini Piano Module for micro:bit is an extension designed for micro:bit. It has 13 touch buttons (resembling piano keys) and they are supported by the TTP229 (I2C interface) driver. Piano for micro:bit
Retired
No product available!
Gamepad extension with buttons and a joystick that enable the micro: bit to create a game console. The module additionally has a buzzer and a Li-ion battery port charged via the USB port.
Retired
No product available!
No product available!
Module with a 3-color (red, black, white) e-Paper display with a diagonal of 2.13" and a resolution of 212x104 px. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 104020130