- Out-of-Stock
Arducam Pan Tilt Camera Bundle - Kit with two 8MP IMX219 PTZ cameras for Jetson Xavier NX/Nano
ID: 584290
5906623403578
A set of two cameras with a Sony IMX219 sensor, allows you to rotate the camera and control the tilt angle. Works with Jetson Nano and Xavier NX. The camera is equipped with an 8MP matrix. ArduCAM B0191PT
Description
A set of two cameras with a Sony IMX219 sensor that allows you to rotate the camera and control the tilt angle. Works with Jetson Nano and Xavier NX. The sensor used has a matrix with a resolution of 8 MP and allows you to record video in 1080p/60fps and 720p/180fps. It has a built-in IR filter. The module is attached to the Jetson set through a dedicated socket and uses a CSI interface specially developed for cooperation with cameras. The cameras are supplied with two swivel stands and a control board.
Features
Camera
- Matrix: Sony IMX219
- Matrix resolution: 8 MP
- Sensor size: 3.674 x 2.760 mm (1/4 format)
- Number of pixels: 3280 x 2464
- Pixel size: 1.12 x 1.12 µm
- Built-in IR filter
- Photo resolution: 3280 x 2464 pixels
- Video: 21fps @ 8MP; 60fps @ 1080P, 180fps @ 720P
- Viewing angle: 62.2 ° (H)
- Dimensions: 25 x 24 mm
Servo GH-S37D
- Torque: 0.6 kg/cm @ 3.6V, 0.8 kg/cm @ 4.8V
- Speed: 0.13 sec/60° at 3.6V, 0.09 sec/60° at 4.8V
- Voltage: 3.6 to 4.8 V
- Current: up to 350 mA
- Dimensions: 20 x 8.75 x 22 mm
Control board
- PWM driver: PCA9685
- PWM resolution: 12 bits
- Ambient Light Sensor: TSL2581FN
- Ambient lighting resolution: 16 bit
- Communication interface: I2C
- Voltage: 3.3V / 5V
- Dimensions: 25 x 61 mm
Kit contains
- 2 x IMX219 8MP Camera for Jetson Nano/Xavier NX with 30cm cable
- 4 x GH-S37D digital servo
- 2 x set of components for the swivel stand
- PWM control board
- 5 x F-F connecting cable
584290
Data sheet
- Resolution
- 8MPx
- Interface
- CSI
- Sensor
- Sony IMX219
- IR filter
- Yes
- Lens assembly
- none
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Jetson Nano Dev Kit with ARM Cortex-A57 1.43 GHz CPU, 4 GB RAM and NVIDIA Maxwell GPU - Waveshare...
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
zł975.01
Delivery date unknown
No product available!
A development kit dedicated to creating modern solutions based on artificial intelligence. It consists of a Jetson Orin Nano Super 8GB module and a base board that can connect to all versions of Orin Nano and Orin NX modules. It is an ideal platform for creating prototypes of next-generation edge-AI products. NVIDIA 945-13766-0005-000
zł1,799.00
Delivery date unknown
No product available!
Other products in the same category (16)
Pre-installed XUbuntu 15.04 or latest version for ODROID-XU3, XU4 and HC1
Retired
No product available!
Pre-installed XUbuntu 15.04 or latest version for ODROID-XU3, XU4 and HC1
Retired
No product available!
The Cloudshell for XU4 is an affordable DIY Network Attached Storage (NAS) Solution to create your own personal cloud! It includes a color LCD console display on the front and has room for a 2.5inch HDD/SSD along with the XU4 board inside the CloudShell
Retired
No product available!
The Cloudshell for XU4 is an affordable DIY Network Attached Storage (NAS) Solution to create your own personal cloud! It includes a color LCD console display on the front and has room for a 2.5inch HDD/SSD along with the XU4 board inside the CloudShell
Retired
No product available!
Cooling Fan X is a cooling fan that can be used to cool any processor that works under heavy load. It can be mounted on the heat sink housing with 4 screws
Retired
No product available!
Photon Wearable Shield makes it easy to add the WiFi enabled Photon to any wearables project. Each pin on the Photon is broken out into large sewing pins. Use conductive thread to make your next wearables projects. DEV-13328
Retired
No product available!
The cable allows connecting the ATMEL-ICE programmer to the commissioning set with any connector (operated by the programmer), through individual pin connectors
Retired
No product available!
1-channel monochrome system of adding subtitles on the image (OSD - On-Screen Display) with integrated EEPROM, TSSOP28, Maxim memory
Retired
No product available!
No product available!
The controller can control two brush motors, communicating with the master system using USB Micro-B, TTL serial interface, analog signals, as well as signals from the RC apparatus. The current capacity of 5A / channel allows you to control high-power motors. Polol 2394
Retired
No product available!
EEPROM CAT93C86LI-G memory; 16kbit; 2K x 8bit; access time: 150ns; Power supply: 1.8 ... 5.5 V; 8-Pin PDIP
Retired
No product available!
Nettemp Pi Hat is a module that allows to connect eight trees of sensors with I2C/1-Wire interface and control of four relays outputs. Thanks to the extension board is possible to build in an easy way e.g. a multipunkt temperature controller.
Retired
No product available!
32GB microSDHC Memory Card with SD Adapter, class 10 A1, Kingston
Retired
No product available!
WiFi 802.11 b / g / n module with ESP8266 system, 5 leads are available with 2 mm pitch with the possibility of soldering of gold pins, power lines, reset line and UART interface have been led to the connector. 3.3V power supply
Retired
No product available!
WiFi 802.11 b / g / n module with ESP8266 system, 8 pins with 2.54 mm pitch are available with soldered gold pins, 3 GPIO lines, reset, power supply and UART interface on the connector. U.FL. Antenna Connector 3.3 V power supply
Retired
No product available!
nRF51 DK is a development board based on the nRF51422 system with Bluetooth Low Energy (BLE) and 2.4 GHz connectivity. The module has a connector compatible with Arduino shields, buttons and diodes available to the user.
Retired
No product available!
A set of two cameras with a Sony IMX219 sensor, allows you to rotate the camera and control the tilt angle. Works with Jetson Nano and Xavier NX. The camera is equipped with an 8MP matrix. ArduCAM B0191PT