.png)
- Out-of-Stock
Nextion NX8048K070_011C - HMI module with 7" TFT touch LCD display + enclosure
ID: 586492
5906623462643
HMI module with a 7" TFT color LCD display with a resolution of 800x480 px. Equipped with a capacitive touch panel. Communication via UART or GPIO interface. Nextion NX8048K070_011C
Description
HMI module (Human-Machine Interface) with a color LCD TFT 7" display with a resolution of 800x480 px. It is equipped with a capacitive touch panel that ensures user interaction with the system being built. The panel has a built-in processor that controls the display, a microSD card slot and Flash memory The module communicates with an external driver via the UART or GPIO interface, thanks to which it can work with popular development kits, such as Arduino, Raspberry Pi or STM32. It is powered with a voltage of 5 V using the attached module and cables. all projects where a user control panel is required, e.g. on production lines.
Designing the appearance and functionality of the graphical user interface (GUI) with Nextion is fast and intuitive thanks to the dedicated Nextion Editor graphic editor. It allows you to prepare the interface using universal blocks, buttons or sliders, thanks to which the user saves time and significantly speeds up the device design process. The project is uploaded to devices via the UART interface. The exact editor's manual is available on the manufacturer's website.
Features
- TFT LCD display
- Screen diagonal: 7"
- Resolution: 800x480 px
- Colors: RGB 65K
- Touch panel type: capacitive
- Communication: UART TTL, 8-pin GPIO
- Built-in 32 MB Flash memory
- 8 kB RAM
- 108 MHz ARM7 CPU
- 1 kB EEPROM
- 1 KB instruction buffer
- Brightness adjustment
- MicroSD card slot
- Power supply: 5V
Kit contains
- Nextion NX8048K070_011C HMI module
- Connection cable
- Power board
- Screws
586492
Data sheet
- Screen type
- TFT
- Diagonal (inch)
- 7
- Resolution
- 800 x 480 px
- Interface
- UART
- Touch
- Yes
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
Available
CP2102 USB to UART Module, USB mini connector
zł22.30
24h
Available quantity: 5
Available
Cable with USB typ A and microUSB typ B connectors, cable length 1.8 m. LANBERG CA-USBM-10CC-0018-BK
zł4.00
24h
Available quantity: 8
Available
Cable with USB typ A and microUSB typ B connectors, cable length 1.8 m. LANBERG CA-USBM-10CC-0018-W
zł3.39
24h
Available quantity: 16
Available
Cable with USB typ A and microUSB typ B connectors, cable length 1 m. LANBERG CA-USBM-10CC-0010-BK
zł3.48
24h
Available quantity: 22
Available
Other products in the same category (16)
Miniature (22x13.5x6mm) WiFi module b / g / n with TCP and UDP protocols operating in standalone and access point modes. 2.0mm goldpin connector. The module is equipped with a UART interface, it is also possible to control GPIO lines (also as PWM). Powered by 3.3V. Antenna: copper wire
Retired
No product available!
Ultra miniature WiFi b/g/n module, equipped with UART, SPI, PWM and GPIO interfaces. The ability to work as an access point and in standalone mode. 3.3V power supply.HF-LPT200-1
Retired
No product available!
This transducer is about 45mm in diameter and has 4Ω impedance and should be run at about 5W
Retired
No product available!
SPIRIT1 868 MHz low power RF module with integrated microcontroller
Delivery date unknown
No product available!
Read/Write analog front end for 125 kHz RFID Basestation, SOIC16, EM Microrlectronic, RoHS
Retired
No product available!
Bitscope Micro is a miniature measuring instrument with a USB interface, it can act as an 8-channel logic analyzer (40MS / s, 3.3V or 5V) or a 2-channel oscilloscope (bandwidth up to 20MHz). In addition, Bitscope can generate a clock signal as well as sinusoidal, triangular, rectangular and saws
Retired
No product available!
High performance WLAN USB module which enables the Raspberry Pi to connect to a Wi-Fi network
Retired
No product available!
32-bit microcontroller from the STM32F4 family with ARM Cortex-M4 core, 256kB Flash, 128KB SRAM, I2C, HDMI-CEC, Irda, LIN, SPI, UART / USART, USB, DMA, PWM, 1.7 ... 3.6V, 64-LQFP
Retired
No product available!
32-bit microcontroller from the STM32F4 family with ARM Cortex-M4 core, 512kB Flash, 128KB SRAM, I2C, HDMI-CEC, Irda, LIN, SPI, UART / USART, USB, DMA, PWM, 1.7 ... 3.6V, 64-LQFP
Retired
No product available!
32-bit microcontroller from the STM32F4 family with ARM Cortex-M4 core, 512kB Flash, 128KB SRAM, I2C, HDMI-CEC, Irda, LIN, SPI, UART / USART, USB, DMA, PWM, 1.7 ... 3.6V, LQFP-144
Retired
No product available!
32-bit microcontroller from the STM32F4 family with ARM Cortex-M4 core, 512kB Flash, 128KB SRAM, I2C, HDMI-CEC, Irda, LIN, SPI, UART / USART, USB, DMA, PWM, 1.7 ... 3.6V, LQFP-100
Retired
No product available!
32-bit microcontroller from the STM32F4 family with ARM Cortex-M4 core, 256kB Flash, 128KB SRAM, I2C, HDMI-CEC, Irda, LIN, SPI, UART / USART, USB, DMA, PWM, 1.7 ... 3.6V, LQFP-100
Retired
No product available!
Kit for building a minisumo robot on a crawler chassis. It has a bulldozer, control board and a set of caterpillars. Robot version for self-assembly, requires additional motors and four AA batteries. Pololu 3124
Retired
No product available!
Expansion module kit with Arduino compatible connectors for building a Zumo robot. The module includes a dual engine controller, buzzer and user button, as well as a 3-axis accelerometer and compass. Pololu 2508
Retired
No product available!
Bi-directional converter enabling communication of any device equipped with an RS232 serial port with 802.11 b / g / n wireless WiFi network. The module can work as a TCP client / TCP or UDP server. The layout is "transparent" for communicating systems, which does not doubt facilitate communication between them.
Retired
No product available!
USB A-microB USB cable with a length of 1m, white-blue cable, flat, green plugs illuminated with RGB diode
Retired
No product available!
HMI module with a 7" TFT color LCD display with a resolution of 800x480 px. Equipped with a capacitive touch panel. Communication via UART or GPIO interface. Nextion NX8048K070_011C