- Out-of-Stock
Camera module with a resolution of 1600 x 1300 px with an OG02B10 sensor designed for Raspberry Pi minicomputers. It can be connected directly to the RPi CSI-2 camera interface. The camera is equipped with a lens with a viewing angle of 110 °, and the shutter and excellent sensitivity in low light allow the module to be used for any application that requires gesture detection, tracking, and depth and motion detection. The set with the camera includes a 15-pin tape for connecting the camera to the Raspberry Pi model B and A, and a 22-pin tape for the Raspberry Pi Zero 2W and the Compute module.
Manufacturer
Responsible person
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 (4 x Cortex-A72) running at 1.8 GHz, 3 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
1 MPx camera module with OV9281 sensor that works with all versions of the Raspberry Pi. Equipped with a shutter and M12 lens mount, it is characterized by good sensitivity. ArduCAM B0224
No product available!
High quality XF-ABS filament for 3D printer with 1.75 mm diameter. 1 kg of wire is wound on the spool.
No product available!
High quality XF-ABS filament for 3D printer with 1.75 mm diameter. 1 kg of wire is wound on the spool.
No product available!
High quality XF-ABS filament for 3D printer with 1.75 mm diameter. 1 kg of wire is wound on the spool.
No product available!
High quality XF-ABS filament for 3D printer with 1.75 mm diameter. 1 kg of wire is wound on the spool.
No product available!
High quality XF-ABS filament for 3D printer with 1.75 mm diameter. 1 kg of wire is wound on the spool.
No product available!
High quality XF-ABS filament for 3D printer with 1.75 mm diameter. 1 kg of wire is wound on the spool.
No product available!
High quality XF-PLA filament for 3D printer with 1.75 mm diameter. 1 kg of wire is wound on the spool.
No product available!
High quality XF-PLA filament for 3D printer with 1.75 mm diameter. 1 kg of wire is wound on the spool.
No product available!
High quality XF-ABS filament for 3D printer with 3 mm diameter. 2 kg of wire are wound on the spool.
No product available!
High quality XF-ABS filament for 3D printer with 1.75 mm diameter. 2 kg of wire are wound on the spool.
No product available!
No product available!
Orange Pi is a computer with Allwinner A20 processor, 1 GB RAM, 1 Gb Ethernet. There are 4 USB 2.0 ports, a USB OTG port, a GPIO 2x13 connector compatible with Raspberry Pi and a micro-SD card slot. The computer is equipped with a SATA interface.
No product available!
Orange Pi Mini 2 is a computer with SoC Alwinner H3 (4 cores Cortex-A7, Mali400MP2 GPU), 1 GB RAM, 100 Mb Ethernet. There are 4 USB 2.0 ports, a USB OTG port, a GPIO 2x20 connector compatible with Raspberry Pi 2 and a micro-SD card slot.
No product available!
Orange Pi 2 is a computer with SoC Alwinner H3 (4 cores Cortex-A7, Mali400MP2 GPU), 1 GB RAM, 100 Mb Ethernet, WiFi 802.11 b / g / n. There are 4 USB 2.0 ports, a USB OTG port, a GPIO 2x20 connector compatible with Raspberry Pi 2 and a micro-SD card slot.
No product available!
Orange Pi PC H3 Quad-core Learning Development Board Mali400MP2 GPU 1GB DDR3
No product available!
Orange Pi Plus is a computer with SoC Alwinner H3 (4 cores Cortex-A7, Mali400MP2 GPU), 1 GB RAM, 1 Gb Ethernet, WiFi 802.11 b / g / n. There are 4 USB 2.0 ports, a USB OTG port, a GPIO 2x20 connector compatible with Raspberry Pi 2 and a micro-SD card slot, 8GB EMMC Flash
No product available!
2 MPx camera module with OG02B10 sensor that works with all versions of the Raspberry Pi. Equipped with a shutter, it is characterized by good sensitivity. ArduCAM B0199