- Out-of-Stock
ArduCAM NoIR IMX219-AF Programmable/Auto Focus IR Sensitive Camera - module with IMX219 camera for Jetson Nano
ID: 586911
Camera module with IMX219 sensor with a resolution of 8 MP equipped with programmable focus, without IR filter. Designed for NVIDIA Jetson Nano and Raspberry Pi CM. ArduCAM B0189
Description
Camera module with IMX219 sensor with a resolution of 8 MPx designed for Raspberry Pi Compute Module (CM3, CM3+, CM4) and NVIDIA Jetson Nano. It is equipped with autofocus with the possibility of programmatic control using open libraries. It has a lens with a viewing angle of 77 °. The camera allows you to record movies with the resolution of 8MP/21fps, 1080p/60fps or 720p/180fps and communicates via the MIPI CSI interface. No IR filter. Perfect for applications of flying objects, autonomous robots or medical tools, where continuous focus adjustment is required.
Features
- Sensor: IMX219
- Optical format: 1/4″
- Resolution: 3280 (H) x2464 (V) 8MP
- Pixel size: 1.12um x 1.12um
- IR sensitivity: no IR
- Interface: MIPI CSI-2
- Frame rate: 1080p/60fps, 720p/180fps or 8MP/21fps
- Focal length: 2.8 mm
- Aperture (F): F2.2
- Field of View (FOV): 77.6° (H)
- Programmable focus, autofocus
586911
Data sheet
- Resolution
- 8MPx
- Interface
- MIPI CSI-2
- Sensor
- Sony IMX219
- IR filter
- No
- Lens assembly
- none
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Compute Module IO Board Plus is a prototype board that allows you to connect Raspberry Pi CM3 module and CM3L module. It is equipped with numerous GPIO pins, HDMI port, USB ports, camera and display ports. Compute Module IO Board Plus
zł287.28
24h
Available quantity: 1
Available
The Compute Module 4 IO Board is a companion board for Raspberry Pi Compute Module 4 (supplied separately). It is designed for use both as a development system for Compute Module 4 and as an embedded board integrated into end products.
zł199.00
24h
Available quantity: 3
Available
Jetson Nano Dev Kit with ARM Cortex-A57 1.43 GHz CPU, 4 GB RAM and NVIDIA Maxwell GPU - Waveshare...
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
zł975.01
24h
Available quantity: 1
Available
Other products in the same category (16)
The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and output on pads. It enables powering devices with 9 V or 12 V and testing chargers. PDC005
Retired
No product available!
Camera module with a resolution of 13 MP equipped with an image sensor AR1335. It is equipped with a FoV 50° lens with an M12 mount. Designed for Raspberry Pi and Jetson Nano. ArduCAM B0277
Retired
No product available!
Robot controller dedicated to Totem sets. It is based on the ESP32 chip (WiFi and Bluetooth module), equipped with a DC motor and servo driver, RGB diodes and an IMU sensor. Totem TE-X4-KIT1
Retired
No product available!
Thermally conductive tape used as a replacement for thermally conductive paste. They are very flexible and characterized by high compressibility. AG Termopasty ART.AGT-161
Retired
No product available!
Li-Po battery with a rated voltage of 3.7 V and a capacity of 1350 mAh, equipped with a PCM protection and a 1.5 JST-ZH connector. Akyga LP503758
Retired
No product available!
Module with a 3-axis MMA8452Q accelerometer. The system has a configurable measurement scale of ±2g/±4g/±8g. It is supplied with the voltage from 1.95 to 3.3 V and communicates via the I2C interface. SparkFun SEN-12756
Retired
No product available!
External enclosure designed to protect, transfer and store data on 2.5” HDD and SSD drives with SATA interface. UGO UKZ-1531
Retired
No product available!
128 GB Hynix SSD. It is equipped with NVMe PCIe 3.0 interface with M.2 B&M Key connector. Hynix HFM128GDHTNG-8310A
Retired
No product available!
Samsung 980 SSD 250 GB. It is equipped with NVMe PCIe 3.0 x4 interface with M.2 M Key connector. Samsung MZ-V8V250BW
Retired
No product available!
External case designed to protect, transfer and store data on M.2 SSD drives with SATA interface. GEMBIRD EE2280-U3C-01
Retired
No product available!
Module with e-Paper display with a diagonal of 2.13" and a resolution of 250x122 px with WiFi communication and Bluetooth 4.2. Waveshare 2.13inch e-Paper Cloud Module
Retired
No product available!
LoRa module based on ESP32-WROOM-32E with WiFi and Bluetooth communication and LoRa RFM95W modem. There are ESP32 pins and a Qwiic connector on the board. SparkFun WRL-18074
Retired
No product available!
A module with a MEMS microphone and an amplifier that will allow you to detect a voice, a clap or a door slam. The board has an analog output. SparkFun BOB-18011
Retired
No product available!
Base board for the SpaceSOM-8Mplus family of modules. Creates a complete development platform similar to the SBC. SoMLabs SpaceCB-8Mplus-ADV v.1.1
Retired
No product available!
HAT expansion module with SATA interface designed for Raspberry Pi 4 model B. It allows you to connect to a minicomputer mass storage in the form of 2.5" HDDs and SSDs with SATA interface
Retired
No product available!
Wall charger with USB and USB type C sockets. Supports QC3.0 + PD3.0 fast charging protocol with a maximum current of up to 3 A. USAMS US-CC085
Retired
No product available!
Camera module with IMX219 sensor with a resolution of 8 MP equipped with programmable focus, without IR filter. Designed for NVIDIA Jetson Nano and Raspberry Pi CM. ArduCAM B0189