- Out-of-Stock
Camera with USB interface, equipped with CMOS IMX219 1/4” sensor with 8 MPx resolution. It has an integrated IR filter and a lens with a field of view of 62 °. The camera can take pictures with a resolution of 3264Hx2448V and record videos at 15fps @ 3264x2448. It is powered from the USB port. The module works with native drivers (compatible with UVC) built into Windows, Linux, Mac and Android, making the installation of the camera easy and intuitive. It will be used for monitoring 3D printing, videoconferences or in projects of mobile robots. It can be connected to both desktops and laptops, and minicomputers such as Raspberry Pi or Jetson Nano. The set also includes an extension tape, at the end of which the camera can be placed and built into a small device or mounted in a hard-to-reach place.
Data sheet
Manufacturer
Responsible person
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 1GB RAM LPDDR4, Broadcom VideoCore VI layout.
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 (4 x Cortex-A72) running at 1.8 GHz, 3 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
300mm ArduCam extension cable. Compatible e.g. with IMX219 image sensor. ArduCam B0186
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
No product available!
The ISM radio module in the DIP housing. It operates on the 868 MHz frequency. The module complies with FCC, ETSI regulations. HOPE MICROELECTRONICS RFM12B-868DP
No product available!
The ISM radio module in the SMD housing. It operates on the 868 MHz frequency. The module complies with FCC, ETSI regulations. HOPE MICROELECTRONICS RFM12B-868S2P
No product available!
A GFSK transceiver operating in the ISM 2400 ... 2483.5 MHz frequency range. Powered by a voltage of 1.9 ... 3.6 V, the pins are goldpin connectors. It has a built-in PCB antenna. HOPE MICROELECTRONICS RFM73-D
No product available!
A minisumo robot on a tracked chassis with Pololu 75:1 HP motors. Fully assembled robot, additionally requires four AA batteries. Pololu 3126
No product available!
Printed circuit board and programmed SNAKE electronic game system. AVT5639 A +
No product available!
AVT kit for self-assembly of SNAKE electronic game. AVT5639 B
No product available!
The assembled SNAKE electronic game. AVT5639 C
No product available!
A 12-in-1 construction set that teaches the use of solar and hydraulic energy. KSR17
No product available!
Self-assembly kit without TOBBIE robot soldering. KSR18
No product available!
10DOF module with intelligent orientation sensor BNO055 (accelerometer, gyroscope and magnetometer + microcontroller) and BMP280 pressure sensor equipped with Gravity connector. DFRobot SEN0253
No product available!
The ISM radio module in the SMD housing. It works on 433MHz frequency. The module complies with FCC, ETSI regulations. HOPE MICROELECTRONICS RFM12B-433S2P
No product available!
Bluetooth Low Energy module in 5.0 standard. It has a completely integrated Bluetooth software stack and offers a shielded certified version with a built-in antenna. Microchip RN4871-I/RM128
No product available!
Assembled adjustable impulse stabilizer 0-25V 0-5A. AVT1522 C
No product available!
Surge protection strip, 5 sockets, CEE 7/7 breaker, 1.8 m long cable. Akyga AK-SP-05A
No product available!
Universal power supply 5V / 3A, 8 plugs, 1.5m. Akyga AK-TB-07
No product available!
Akyga AK-B1-400S power supply intended for powering desktops. Compliant with ATX 2.31 standard, 400W power. Akyga AK-B1-400S
No product available!
Camera with a resolution of 8 MPx with a USB interface. Equipped with a CMOS IMX219 sensor with a lens with a viewing angle of 62° and a 30 cm extension cord. ArduCAM B0320