Filament ROSA3D PLA CarbonLook 1.75mm Black

Description

1.75 mm PLA filament for 3D printing by ROSA3D. 0.5 kg of filament is wound on the spool. The recommended printing temperature is in the range of 185°C to 225°C, and the temperature of the bed during printing is in the range of 40°C to 60°C.

Rosa3D is a Polish manufacturer of filaments intended for both hobby and industrial printing. Thanks to many years of experience and modern machinery, the company is able to provide good quality and accuracy of the diameter and roundness of the filament.

The small addition of carbon fibers used in the material results in a printout with a satin surface and almost invisible layers, with only a slight stiffening of the material. An additional advantage is the possibility of obtaining a slight transparency of the material in prints with very thin walls. Printing with PLA CarbonLook has properties similar to other PLA filaments. This means exceptional ease of printing, low threading and very good interlayer adhesion. The prints are characterized by a very good reproduction of details and a unique surface. To minimize friction and maximize the life of the brass nozzles, the abrasion properties of the carbon fibers have been kept to a minimum. PLA CarbonLook will be perfect even for the simplest devices. It does not require a heated table or closed chamber. It is characterized by low shrinkage and no unpleasant odor.

Features

• Colour: Black
• Diameter: 1.75 mm
• Diameter tolerance: +/- 0.05mm
• Oval tolerance: +/- 0.02mm
• Printing temperature: 185°C to 225°C
• Bed temperature: 40°C to 60°C (when using washers or other means to increase the adhesion, the heating of the bed is not required)
• Print speed: 60 to 80 mm/s
• Density 1.24 g/cm3
• Odorless smell
• Net weight: 0.5 kg