- Out-of-Stock
MicroMod Main Board (Double) - base board for MicroMod modules
ID: 588333
An expansion board designed for MicroMod main modules. It is equipped with a Qwiic connector and two sockets for attaching functional modules. SparkFun DEV-18576
Description
The MicroMod Main Board is an expansion board designed for MicroMod main modules. It is equipped with a Qwiic connector and two sockets for attaching functional modules. There is a USB type C connector on the board, which can be used both for power supply, system programming and communication. The module with the microcontroller and the functional module are plugged into M.2 connectors. In addition, the board includes the Reset and Boot buttons, a charging circuit with a battery connector and a 3.3V stabilizer. On the product page there is a guide with sample programs, which makes it easier to start working with the set.
MicroMod is an interface ecosystem that connects the main module to the processor or the microcontroller to various peripherals through expansion boards. Using the M.2 standard, MicroMod allows easy replacement of main modules.
Features
- 3 x M.2 connectors
- USB type C connector
- LiPo battery connector
- Voltage regulator 3.3 V 1A
- 2 x Qwiic connectors
- Boot and reset buttons
- Charging circuit with AP7361C chip and configurable charging current
- Signaling diodes
- Dimensions: 76 x 88 mm
Kit contains
- MicroMod Main Board Double
- 4 x M2.5x3mm screw
- 2 x jumper shunts
588333
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
MicroMod main module equipped with Bluetooth 5.0 Sparkfun Artemis. Equipped with an M.2 connector, it can work with MicroMod expansion boards. SprakFun DEV-16401
zł91.36
24h
Available quantity: 1
Available
MicroMod main module with SAMD51 microcontroller. Equipped with an M.2 connector, it can work with MicroMod expansion boards. SprakFun DEV-16791
zł105.42
24h
Available quantity: 1
Available
MicroMod main module with nRF52840 chip equipped with Bluetooth 5.1. The board uses an M.2 connector, so it can work with MicroMod expansion boards. SprakFun DEV-16984
zł116.32
24h
Available quantity: 2
Available
MicroMod main module with RP2040 microcontroller. Equipped with an M.2 connector, it can work with MicroMod expansion boards. SprakFun DEV-17720
zł77.32
24h
Available quantity: 2
Available
Function module designed for MicroMod boards. It allows you to add LoRa and LoRaWAN wireless communication in the 915 MHz frequency band to the project. SparkFun DEV-18573
zł245.27
24h
Available quantity: 1
Available
Function module designed for MicroMod boards. It combines the SGP40 (air quality), SHTC3 (temperature and humidity) and STC31 (CO2 concentration) sensors and communicates via the I2C interface. SparkFun DEV-18632
zł1,163.27
Delivery date unknown
No product available!
Function module designed for MicroMod boards. It allows you to add WiFi wireless communication based on the DA16200 chip to the project. SparkFun WRL-18594
zł161.66
24h
Available quantity: 1
Available
Other products in the same category (16)
5 megapixel camera module compatible with Coral Dev Board. Connects via the MIPI-CSI interface. Coral Camera
Retired
No product available!
Evaluation kit with i.MX 8M Mini Quad processor. It consists of a motherboard and a plate with an application processor plugged into the motherboard. The set has a WiFi module and Bluetooth 4.1 and a built-in chip antenna, connectors for display, audio and USB 3.0. NXP 8MMINILPD4-EVK
Retired
No product available!
EMMC Flash memory module for Hardkernel Odroid N2 computers. 8GB capacity, Android operating system installed. The set includes a microSD adapter. Hardkernel 8GB eMMC Module N2 Android
Retired
No product available!
EMMC Flash memory module for Hardkernel Odroid N2 computers. 8 GB capacity, installed Linux operating system. The set includes a microSD adapter. Hardkernel 8GB eMMC Module N2 Linux
Retired
No product available!
No product available!
A NFC-compatible Raspberry Pi expansion kit with integrated antent. It has the ability to work in reader mode, P2P
and card emulation mode. NXP PN7150
Retired
No product available!
BGA balls with a diameter of 0.35 mm and composition Sn63 / Pb37. The ampoule contains 10,000 pieces.
Retired
No product available!
BGA balls with a diameter of 0.3 mm and composition Sn63 / Pb37. The ampoule contains 10,000 pieces.
Retired
No product available!
Speaker cable, two-core with a cross section of 1 mm2, black and red, PVC insulation. Price per meter. TASKER TSK53
Retired
No product available!
Speaker cable, two-core, 0.75 mm2 cross section, black and red, PVC insulation. Price per meter. TASKER TSK52
Retired
No product available!
Tin Sn60Pb40 with flux (100 g spool), diameter 0.38 mm. Cynel LC60-0.38/100
Retired
No product available!
E-ink display for Raspberry Pi with 2.13 "diagonal resolution and 250x122 pixels with SPI controller. DFRobot DFR0591
Retired
No product available!
FPGA starter kit with Intel Stratix 10 GX. The module has integrated transceivers that transfer data at speeds up to 28.3 Gb/s, making DE10-Pro fully compatible with version 3.0 of the PCI Express standard. The DE10-Pro offers fast parallel Flash memory and four SO-DIMM slots that support DDR4 SDRAM options. Terasic P0626
Retired
No product available!
FPGA starter kit with Intel Stratix 10 GX. The module has integrated transceivers that transfer data at speeds up to 28.3 Gb/s, making DE10-Pro fully compatible with version 3.0 of the PCI Express standard. The DE10-Pro offers fast parallel Flash memory and four SO-DIMM slots that support DDR4 SDRAM options. Terasic DE10-Pro-GX-280-8G (P0626)
Retired
No product available!
XTREME DT830B multimeter enabling constant voltage measurement in the range of 200 mV - 500 V, alternating voltage 200 - 500 V, direct current 200 μA - 5 A and resistance 200 Ω - 2 MΩ. DT830B XTREME
Retired
No product available!
MicroHDMI-HDMI cable in black and 1 meter length. It has a gold plated plug.
Retired
No product available!
An expansion board designed for MicroMod main modules. It is equipped with a Qwiic connector and two sockets for attaching functional modules. SparkFun DEV-18576