- Out-of-Stock
Fiberlogy FiberFlex 30D filament in Blue with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Recommended printing temperature should be in the range from 200°C to 220°C, while the table temperature in the range from 50°C to 70°C (heating the table required). The filament is wound on a spool and vacuum packed.
Fiberlogy is a Polish manufacturer of filaments for FFF/FDM 3D printers. The company has many years of experience in the processing of plastics. Fiberlogy filaments are characterized by high quality, innovation, great variety and are made of proven raw materials with the best parameters.


FiberFlex 30D is a thermoplastic elastomer and another option for enthusiast of printing on rubber-like materials. It is characterized by reduced hardness up to 30D on the Shore scale, very good flexibility and higher impact strength. The material is recommended especially for printing tires, seals, belts and all kinds of elastic elements.
Check out our offer of 3D printers and choose the best set for you.
Manufacturer
Responsible person
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Spray 400ml
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Pen 90ml
3D printer with a filament sensor and colorful LED backlight. For self-assembly, included with the necessary accessories. BIQU B1
Black MattFlex 40D filament with a diameter of 1.75 mm. 0.5 kg of filament is wound on the spool. Fiberlogy MattFlex 40D Black
No product available!
A circuit board and a programmed layout for a falling meteorite. AVT3186 A +
No product available!
AVT kit for self-assembly of a falling meteorite. AVT3186 B
No product available!
Assembled falling meteorite. AVT3186 C
No product available!
Printed circuit board and programmed thermostat system with LED display. AVT3220 A +
No product available!
AVT kit for self-assembly of a thermostat with LED display. AVT3220 B
No product available!
Assembled thermostat with LED display. AVT3220 C
No product available!
A circuit board for the (half) home automation system - a four-channel ON / OFF module. AVT3212 A
No product available!
AVT kit for self-assembly of the (half) home automation system - four-channel ON / OFF module. AVT3212 B
No product available!
Assembled system (half) of home automation - four-channel ON / OFF module. AVT3212 C
No product available!
The PCF8574 IO expansion board is an 8-bit I / O expander controlled by the I2C interface. Up to 8 PCF8574 IO expansion cards can be connected to the I2C bus, providing up to 64 I / O ports. Waveshare 3708
No product available!
MYIR MYS-7Z0007S-C - KIT is a set of elements with a single board computer based on the Xilinx XC7Z007S-1CLG400C (Zynq-7007S) system. This system consists of a single-core processor based on Cortex-A9 core, which can operate at a maximum frequency of 667 MHz and Artix-7 FPGA. The computer is equipped with 512 MB of DDR3 SDRAM, 4 GB of eMMC memory and 16 MB of QSPI Flash memory
No product available!
MYIR MYS-7Z0007S-C is a single board module based on the Xilinx XC7Z007S-1CLG400C chip (Zynq-7007S). This system consists of a single-core processor based on Cortex-A9 core, which can operate at a maximum frequency of 667 MHz and Artix-7 FPGA. The computer is equipped with 512 MB of DDR3 SDRAM, 4 GB of eMMC memory and 16 MB of QSPI Flash memory
No product available!
MYIR MYIR MYS-7Z010-LC is a set of elements with a single board computer based on the Xilinx XC7Z010-1CLG400C (Zynq-7010) system. This system consists of a dual-core processor based on Cortex-A9 core, which can operate at a maximum frequency of 667 MHz. The computer is equipped with 512 MB of DDR3 SDRAM, 4 GB of eMMC memory and 16 MB of QSPI Flash memory
No product available!
MYIR Z-turn Lite MYS-7Z010-LCS is a single board module based on the Xilinx XC7Z010-1CLG400C (Zynq-7010) chipset. This system consists of a dual-core processor based on Cortex-A9 core, which can operate at a maximum frequency of 667 MHz. The computer is equipped with 512 MB of DDR3 SDRAM, 4 GB of eMMC memory and 16 MB of QSPI Flash memory
No product available!
Z-turn IO Cape extension board is an extension board for Z-turn series tiles based on Xilinx Zynq
No product available!
FiberFlex 30D filament in Blue with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy FiberFlex 30D Blue