- Out-of-Stock
Fiberlogy FiberFlex 30D filament 1.75mm 0,85kg Graphite
ID: 588646
FiberFlex 30D filament in Graphite with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy FiberFlex 30D Graphite
Description
Fiberlogy FiberFlex 30D filament in Graphite with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Recommended printing temperature should be in the range from 200°C to 220°C, while the table temperature in the range from 50°C to 70°C (heating the table required). The filament is wound on a spool and vacuum packed.
Fiberlogy is a Polish manufacturer of filaments for FFF/FDM 3D printers. The company has many years of experience in the processing of plastics. Fiberlogy filaments are characterized by high quality, innovation, great variety and are made of proven raw materials with the best parameters.
FiberFlex 30D is a thermoplastic elastomer and another option for enthusiast of printing on rubber-like materials. It is characterized by reduced hardness up to 30D on the Shore scale, very good flexibility and higher impact strength. The material is recommended especially for printing tires, seals, belts and all kinds of elastic elements.
Check out our offer of 3D printers and choose the best set for you.
Features
- Graphite colour
- Diameter: 1.75 mm
- Diameter tolerance: +/- 0.05 mm
- Oval tolerance: +0.03 mm
- Print temperature: 200°C to 220°C
- Table temperature: 50°C to 70°C
- Table heating required
- Recommended printing speed: <35 mm/s
- Net weight: 0.85 kg
- Total weight: 2.5 kg
588646
Data sheet
- Rodzaj filamentu
- TPE
- Ilość filamentu
- 0,85 kg
- Diameter
- 1,75 mm
- Colour
- Graphite
Manufacturer FIBERLAB SPÓŁKA AKCYJNA Brzezie 387 32-014 Brzezie Poland office@fiberlogy.com
Responsible person FIBERLAB SPÓŁKA AKCYJNA Brzezie 387 32-014 387 Brzezie Poland office@fiberlogy.com
You might also like
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Spray 400ml
zł45.85
24h
Available quantity: 100
Available
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Pen 90ml
zł54.46
Delivery date unknown
No product available!
FiberFlex 40D filament in Light green with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy FiberFlex 30D Light green
zł170.11
Delivery date unknown
No product available!
3D printer with a filament sensor and colorful LED backlight. For self-assembly, included with the necessary accessories. BIQU B1
Regular pricezł1,099.01zł639.60
24h
Available quantity: 5
Available
Other products in the same category (16)
No product available!
USB camera module with 8 MP resolution based on Sony IMX179 1/3.2" matrix compatible with UVC. It has variable focal length adjustable from 5 to 50 mm. Equipped with a lens with CS mount with integrated UV filter. ArduCAM UB0213
Retired
No product available!
A set of PCBs with a programmed layout for the LED thermometer - version 27mm green. AVT1697 / 2 / G A +
Retired
No product available!
No product available!
No product available!
2-pin ARK mounting strip, 5.0 mm pitch. 300R-5.0-02P-12-00A(H)
Retired
No product available!
No product available!
Minicomputer equipped with SoC Rockchip RK3399 (ARM Cortex-A72 / ARM Cortex-A53). The computer has been well-equipped, including in the Gigabit Ethernet interface, mSATA interface, miniPCIe connector, USB type C, dual CSI interface, etc. On the board you can run Android 6.0 and Linux
Retired
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Starter Blue
Retired
No product available!
No product available!
No product available!
Dispensing needle bent, for precise application of glue, flux with an inner diameter of 0.25 mm and an external diameter of 0.5 mm
Retired
No product available!
The Raspberry Pi GPIO connector adapter allows you to output signals from Raspberry Pi to the contact plate. Two LEDs indicate +3.3V and +5V power supply
Retired
No product available!
AVT kit for self-assembly of SNAKE electronic game. AVT5639 B
Retired
No product available!
Kit for building a minisumo robot on a crawler chassis. It has a bulldozer, control board and a set of caterpillars. Robot version for self-assembly, requires additional motors and four AA batteries. Pololu 3124
Retired
No product available!
No product available!
FiberFlex 30D filament in Graphite with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy FiberFlex 30D Graphite