New products
New products New products
zł1,093.22
4 weeks
Track Map - board for the micro:Maqueen robot
ID: 573783
5902186313941
zł22.04
Tax included
zł17.92 tax excl.
A multifunctional board with dimensions of 120 x 90 cm dedicated to the micro:Maqueen and micro:Maqueen Plus robots. It allows you to implement line tracking scenarios. DFRobot MBT0011
Description
A multifunctional board with dimensions of 120 x 90 cm dedicated to the micro:Maqueen and micro:Maqueen Plus robots. Black lines with a width of 2 cm have been printed on 120g paper, which allow for the implementation of scenarios related to line tracking. There is an elliptical "8" shaped pattern on the front of the map, which is suitable for basic robot learning to follow a line. A complex pattern has been designed on the back to allow testing of advanced algorithms. The map has a calibration area for line sensors so that users can easily calibrate Maqueen Lite (version 4.1 and newer) or Maqueen Plus robots with a single key.
Features
- Dimensions: 120 x 90 cm
- The width of the lines on the board: 2 cm
- Paper Type: 120g
573783
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Kit for building a simple educational robot Maqueen micro:bit chassis with engines, distance sensor, battery basket and necessary assembly elements. DFRobot ROB0148
zł213.36
24h
Available quantity: 6
Available
A set for building an interactive robot based on the micro: bit module. It can be programmed using tools such as Mind+, Scratch, MakeCode and MicroPython. DFRobot MBT0021-EN
zł368.41
24h
Available quantity: 1
Available
A set for building an interactive robot based on a micro: bit module with a front loader. It can be programmed with tools such as Mind+, Scratch, MakeCode and MicroPython. DFRobot ROB0156-L-1
zł250.34
Delivery date unknown
No product available!
Other products in the same category (16)
The A-Cute Car is an FPGA-based three-wheeled robotic car kit. This car can provide higher operation performance than the MCU based robotic car, because the FPGA provides more powerful computing power than the MCU. P0467
zł1,690.99
4 weeks
No product available!
This control board turns the Romi chassis into a programmable robot based on the Arduino-compatible ATmega32U4 MCU. Pololu 3544
zł326.09
4 weeks
No product available!
A set for building a balancing robot. It has a board with an ATmega 32u4 microcontroller, engine controllers, modules with quadrature encoders and an IMU system (gyroscope, accelerometer, magnetometer). Pololu 3575
zł406.15
24h
Available quantity: 1
Available
This AlphaBot2 robot kit is designed to use with an Arduino compatible board UNO PLUS. It features rich common robot functions including line tracking, obstacle avoiding, ultrasonic ranging, infrared remote control, Bluetooth communication.
zł357.52
24h
Available quantity: 2
Available
The MiniQ 2WD Robot Kit v2.0 chassis has a built-in driver compatible with the Arduino Leonardo plate. The chassis has been equipped with reflective sensors, a compass and obstacle sensors. Thanks to them, it is possible to create a robot following a line (linefollower) or controlled by an IR remote (which is included in the set). DFRobot ROB0081
zł427.22
24h
Available quantity: 1
Available
Bionic hand controlled by servos. It is made of acrylic material, allows you to control each finger separately. DFRobot ROB0142
zł999.01
4 weeks
No product available!
Bionic hand controlled by servos. It is made of acrylic material, allows you to control each finger separately. DFRobot ROB0143
zł999.01
4 weeks
No product available!
Replacement sprockets set for the Zumo robot in white. The kit includes two drive sprockets and two idle sprockets. The gears fit both Zumo V1.2 and Zumo 32U4 robots. Pololu 3129
zł29.19
4 weeks
No product available!
A self-assembly kit that allows you to build a work that follows the line (Linefollower). A set of all electronic and mechanical components needed for construction. A soldering iron will be needed for assembly. D2-5
zł25.92
4 weeks
No product available!
A set with a support ball designed for the Balboa 32U4 robot. It allows you to transform the Balboa balancing robot chassis into a traditional platform with a differential and a support ball. Pololu 3272
zł44.86
4 weeks
No product available!
Robot chassis kit with support ball for Balboa 32U4 robot. The kit does not include motors, wheels and electronic components. Pololu 3573
zł157.27
4 weeks
No product available!
Empower your Romi robot to manipulate its surroundings with this robotic arm accessory kit! The kit contains everything you need to build the arm, including a micro gripper and three servos—one for controlling the height of the arm, one for controlling the tilt of the gripper, and one for actuating the gripper paddles themselves.
zł497.61
4 weeks
No product available!
A small size gripper driven by a servomotor with a movement range of 32 mm. It contains a special micro servo with an additional wire that gives access to its feedback, so you can track the actual position of the gripper blades. Polol 3551
zł137.45
4 weeks
No product available!
Kit for building a simple educational robot Maqueen micro:bit chassis with engines, distance sensor, battery basket and necessary assembly elements. DFRobot ROB0148
zł213.36
24h
Available quantity: 6
Available
A set for building an educational robot based on the popular micro:bit module. It is intended for people over 8 years of age. It allows you to introduce a child to the world of robotics in a simple and friendly way. DFRobot ROB0147
zł835.70
24h
Available quantity: 2
Available
Multifunctional robot with 2WD chassis and controller in the form of a micro:bit educational module. It is a universal mobile platform that can track the line and find and avoid obstacles. Waveshare AlphaBot2 for micro:bit Acce Pack
zł405.88
4 weeks
No product available!
A multifunctional board with dimensions of 120 x 90 cm dedicated to the micro:Maqueen and micro:Maqueen Plus robots. It allows you to implement line tracking scenarios. DFRobot MBT0011