Flasher PRO (5.17.01)

Flasher PRO (5.17.01)
Flash Programmer for ARM7/9/11, Cortex, RX and PPC cores

Flasher PRO is a programming tool for microcontrollers with on-chip or external Flash memory and ARM, RX or PPC core. Flasher PRO is designed for programming flash targets with the J-Flash software or stand-alone. In addition to that Flasher PRO has all of the J-Link functionality. Flasher PRO connects via USB, Ethernet or via RS232 interface to a PC, running Microsoft Windows 2000, Windows XP, Windows 2003, Windows Vista, Windows 7 or Windows 8 and has a built-in 20-pin JTAG connector, which is compatible with the standard 20-pin connector defined by ARM.

Features:

• Stand-alone JTAG/SWD programmer (Once set up, Flasher can be controlled without the use of PC program)
• Ethernet interface
• Supports internal and external flash devices
• Wide range of devices are supported. For a complete list, please click here
• Free software updates (As a legitimate owner of a SEGGER Flasher, you can always download the latest software free of charge. Though not planned and not likely, we reserve the right to change this policy. Note that older models may not be supported by newer versions of the software. Typically, we support older models with new software at least 3 years after end of life.), 2 years of support
• 128 MB internal NAND flash, used for storing configuration and data files
• Serial in target programming supported
• Data files can be updated as mass storage or via J-Flash
• Target interface: JTAG / SWD
• No power supply required, powered through USB
• Can be used as J-Link (JTAG emulator) with a download speed of up to 1 MByte/second
• Programming speed typically between 30 KBytes/second and 1 MByte/second. Max. programming speed highly depends on target hardware and max. programming speed of the flash itself.

Package content

• Flasher PRO
• 20-pin, 0.1" target ribbon cable
• RS232 cable 1:1 female / male
• USB cable
• USB power supply

Download

• Flasher PRO webpage

Code:Flasher PRO (5.17.01)