- New
zł30.52
SEQURE SQESC 2670 - ESC controller 2-6S 70A AM32
ID: 1205236
zł159.14
Tax included
zł129.38 tax excl.
Brushless ESC speed controller designed for FPV drones and RC models. Equipped with a 32-bit STM32G071 processor and PWM support up to 128 kHz, it ensures smooth and responsive motor operation. It supports DShot, PWM, Oneshot, and Multishot protocols, offering broad compatibility with flight controllers, as well as a continuous current of 70 A and a maximum current of 110 A. It has a built-in adjustable BEC (5-12 V). SEQURE SQESC 2670 AM32
Description
SEQURE SQESC 2670 is an advanced brushless motor ESC designed for a wide range of RC applications, including FPV drones, multirotors, RC airplanes, boats, and off-road vehicles. The device is equipped with a powerful 32-bit STM32G071 processor operating at up to 64 MHz, ensuring very fast and precise motor control. Support for PWM frequencies up to 128 kHz enables smooth, responsive operation and high drive efficiency. The use of high-current MOSFET transistors and a metal heatsink allows for effective heat dissipation.
SEQURE SQESC 2670 offers wide compatibility thanks to support for DShot (all variants), PWM, Oneshot, and Multishot protocols, enabling operation with most flight controllers. Automatic throttle signal detection at startup simplifies configuration and speeds up setup. The built-in protection system, including low voltage, overheating, motor stall, and overcurrent protection, increases operational safety and protects components.
Advanced configuration options are available via a visual programming tool, allowing adjustment of parameters such as motor timing, throttle calibration, rotation direction, and response characteristics. Additionally, the device features programmable RGB LED lighting, enabling visual customization. Thanks to its versatility and high performance, SEQURE SQESC 2670 is an excellent choice for demanding users looking for a reliable ESC for various RC applications.
Features
- Processor: STM32G071
- Input voltage: DC 7V to 25.2V (2 to 6S LiPo)
- Continuous current (with proper cooling): 70A
- Peak current (with proper cooling): 110A
- Supported firmware: AM32
- Supported protocols: DShot (All), PWM, Oneshot, Multishot, etc.
- Programmable parameters
- Throttle calibration
- Timing adjustment
- Current sensing
- Telemetry signal
- Motor rotation direction settings
- RGB LED lighting
- Dimensions: 190 × 18 × 11 mm
- Weight: 22 g
1205236
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
A brushless FPV motor designed for racing and long-range applications, offering high efficiency and dynamic throttle response. Its 22x7mm 12N14P design with high-quality copper windings and a 14-pole rotor ensures stable and smooth operation under heavy loads. The motor operates in the 4-6S LiPo/LiHV range, reaching a maximum power of 940W and a current of up to 37.3A, allowing for aggressive flights while maintaining reliability. SEQURE S2207 BLDC 6S 1850KV
zł92.83
24h
Available quantity: 3
Available
A brushless FPV motor designed for racing and long-range applications, offering high efficiency and dynamic throttle response. Its 22x7mm 12N14P design with high-quality copper windings and a 14-pole rotor ensures stable and smooth operation under heavy loads. The motor operates in the 4-6S LiPo/LiHV range, reaching a maximum power of 1134W and a current of up to 45A, allowing for aggressive flights while maintaining reliability. SEQURE S2207
zł93.53
24h
Available quantity: 3
Available
Other products in the same category (16)
ESC RC controller module with FlySky receiver. It allows you to control two motors in two directions and one motor in one direction. Dasmigro 2.4G 7CH
Regular pricezł114.59zł81.04
24h
Available quantity: 2
Available
Two-channel ESC controller for brushed motors. It can deliver 40 A and has wires terminated with an XT60 connector
zł92.50
24h
Available quantity: 2
Available
ESC type controller for a DC motor with a supply voltage of 3.7 V to 5 V. It offers a maximum output current of up to 1.5 A and allows you to control two motors independently
zł60.61
4 weeks
No product available!
Miniature ESC type controller for a DC motor with an input from 3.7 V to 5 V. Offers an additional output current of up to 1.5 A and allows you to control the motor in a channel mixing device
zł64.64
24h
Available quantity: 1
Available
An advanced speed controller designed to power three-phase brushless motors in various applications, such as driving robots, walking robots or gimbals. Supports input voltage range from 12V to 56V. Maximum constant current is 60A. Makerbase ODrive-S
zł293.93
24h
Available quantity: 9
Available
The ODrive3.6 ESC speed controller is designed to power two three-phase brushless motors in various applications, such as driving robots, walking robots or gimbals. Supports input voltage range from 12 V to 56 V and maximum current up to 60 A. Makerbase ODrive3.6
zł412.21
4 weeks
No product available!
Set with ODrive3.6 ESC speed controller and MKS X2212 BLDC motor. The controller is designed to power two three-phase brushless motors in various applications, such as driving robots, walking robots or gimbals. Supports input voltage range from 12 V to 56 V and maximum current up to 60 A. Makerbase ODrive3.6 Kit
zł640.22
24h
Available quantity: 2
Available
A speed controller based on the open VESC standard, designed for electric skateboards, scooters, and e-bikes. It supports voltages from 14 to 75 V and continuous currents up to 100 A, offering various BLDC motor control modes, and a wide range of interfaces (PPM, UART, I2C, USB-C, CAN). Its compact design and extensive security features ensure reliability, flexible configuration, and convenient integration with computers and smartphones. Makerbase VESC 75100
zł531.68
4 weeks
No product available!
This speed controller is designed for high voltage and high current applications, ideal for electric vehicles, e-foils, and robotics. It supports voltages up to 84 V and continuous currents up to 200 A. Its ARM Cortex-M4 STM32F405RG processor ensures precise control and fast signal processing. It supports various control modes, works with BLDC and DC motors in both sensored and sensorless versions, and is configured via USB or Bluetooth using the VESC Tool. Makerbase VESC 75200 V2
zł776.23
4 weeks
No product available!
An advanced speed controller designed to power three-phase brushless motors in a variety of applications such as electric scooters, electric skateboards and electric bicycles. It supports an input voltage range of 8 V to 60 V, which corresponds to 3S to 13S for LiPo batteries, and a maximum current of up to 50 A. Makerbase VESC MINI 6.7 Pro
zł430.32
24h
Available quantity: 4
Available
2-channel brush motor controller module with PWM signal mixing function. It allows you to control two DC motors with a current consumption of up to 5 A per channel
zł45.02
24h
Available quantity: 1
Available
3-channel brush motor controller module with PWM signal mixing function. It allows you to control three DC motors with a current consumption of up to 15 A per channel
zł96.96
24h
Available quantity: 4
Available
3-channel brush motor controller module with PWM signal mixing function. It allows you to control three DC motors with a current consumption of up to 3 A per channel
zł53.53
4 weeks
No product available!
ESC controller module for a brushless motor with a current capacity of up to 40 A. It can work with LiPo packages from 3S to 6S. Uses BLHeli_32 software. Skystars Talon32
zł78.14
24h
Available quantity: 3
Available
ESC controller module for a brushless motor with a current capacity of up to 120 A. It can work with LiPo packs from 5S to 12S. Uses BLHeli_32 software. FLYCOLOR X-CROSS HV
zł538.99
24h
Available quantity: 1
Available
ESC controller module for a brushless motor with a current capacity of up to 80 A. It can work with LiPo packs from 5S to 12S. Uses BLHeli_32 software. FLYCOLOR X-CROSS HV
zł445.74
4 weeks
No product available!
Brushless ESC speed controller designed for FPV drones and RC models. Equipped with a 32-bit STM32G071 processor and PWM support up to 128 kHz, it ensures smooth and responsive motor operation. It supports DShot, PWM, Oneshot, and Multishot protocols, offering broad compatibility with flight controllers, as well as a continuous current of 70 A and a maximum current of 110 A. It has a built-in adjustable BEC (5-12 V). SEQURE SQESC 2670 AM32