X-NUCLEO-GFX02Z1 - expansion board with display for STM32 Nucleo-144
ID: 1181206
5906623436651
zł182.69
Tax included
zł148.53 tax excl.
Expansion board with LCD TFT 2.2" display for STM32 Nucleo-144 sets. Equipped with SPI NOR Flash 64Mbit memory for storing images and a joystick for GUI navigation. STMicroelectronics X-NUCLEO-GFX02Z1
Description
X-NUCLEO-GFX02Z1 is an expansion board with LCD TFT 2.2 "display, designed for STM32 Nucleo-144 sets. Apart from the display, there is also a NOR Flash memory with SPI interface with a capacity of 64 Mbit (8 MB) and a joystick. prototype for projects that require the creation of a graphical user interface (GUI).
The board is compatible with the following kits: NUCLEO-F412ZG, NUCLEO-F413ZH, NUCLEO-F446ZE, NUCLEO-F722ZE, NUCLEO-F746ZG, NUCLEO-F756ZG, NUCLEO-F767ZI, NUCLEO-H743ZI, NUCLEO-H723ZG, NUCLEO-H753ZI, NUCLEO-H745ZI-Q, NUCLEO-H755ZI-Q, NUCLEO-H7A3ZI-Q, NUCLEO-L496ZG, NUCLEO-L496ZG-P, NUCLEO-L4A6ZG, NUCLEO-L4P5ZG, NUCLEO-L4R5ZI, NUCLEO-L4R5ZI-P, NUCLEO-L552ZE-Q i NUCLEO-U575ZI-Q.
Features
- 2.2 inch SPI QVGA TFT LCD display with 320 × 240 resolution
- 64-Mbit SPI NOR Flash memory
- Joystick for easy menu navigation
- Compatible with selected STM32 Nucleo-144 boards
- ST Zio interface
1181206
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
STM32 Nucleo-144 development board with STM32F412ZG MCU, supports Arduino, ST Zio and morpho connectivity
zł95.78
24h
Available quantity: 3
Available
The STM32 Nucleo-144 boards provide an affordable and flexible way for users to try out new concepts and build prototypes by choosing from the various combinations of performance and power consumption features, provided by the STM32 microcontroller. For the compatible boards, the SMPS significantly reduces power consumption in Run mode.
zł106.52
24h
Available quantity: 1
Available
Development board with ST Zio and ST morpho connectors, based on the STM32L4R5ZIT6 microcontroller from the STM32L4 + series. Thanks to the embedded programmer compatible with ST-Link/v2-1, it is possible to program and debug the microcontroller via USB. STMicroelectronics NUCLEO-L4R5ZI-P
zł106.42
24h
Available quantity: 2
Available
Development board with ST Zio and ST morpho connectors, based on the STM32H755ZI microcontroller. Thanks to the embedded STLINK-V3 programmer, it is possible to program and debug the microcontroller via USB. STMicroelectronics NUCLEO-H755ZI-Q
zł148.56
Delivery date unknown
No product available!
Starter kit from the NUCLEO series equipped with the STM32H723ZG microcontroller (1 MB Flash, Cortex-M7), with a built-in programmer-debugger ST-Link/V3, equipped with connectors compatible with Arduino. STMicroelectronics NUCLEO-H723ZG
zł137.98
24h
Available quantity: 5
Available
Other products in the same category (16)
he flame detector module detects the source emitting a wavelength between 760 and 1100 nm. It allows to detect, among others source of fire. Analog interface. DFRobot DFR0076
zł18.09
4 weeks
No product available!
The STEVAL-MKI079V1 board enables demonstration and testing of the dual-axis LPR430AL gyroscope in analog or digital mode. The built-in microcontroller and USB interface facilitate signal analysis and the development of MEMS sensor-based applications in measurement and control systems.
zł384.79
24h
Available quantity: 3
Available
et with a measuring module and a probe for measuring electrical conductivity. It allows you to measure the salinity of water and soil. It has a Gravity analog output interface. DFRobot DFR0300-H
zł353.75
4 weeks
No product available!
Starter kit with STM32MP157DAC1 application microprocessor (Cortex-A7 and Cortex-M4). It is equipped with Ethernet 1 Gb/s, USB type C connector and 4 USB type A sockets. It has a built-in ST-LINK/V2-1. STMicroelectronics STM32MP157D-DK1
zł366.54
24h
Available quantity: 1
Available
Module with RGB diode and P9813 controller. It is powered with the voltage of 5 V and controlled by the I2C interface (Grove). Seeed Studio 104030006
zł18.12
24h
Available quantity: 2
Available
Class D stereo sound amplifier based on the Texas Instruments TPA2016D2 circuit. It can work with 4 Ω speakers with power up to 2.8 W or 8 Ω with power up to 1.7 W in stereo mode. SparkFun DEV-20690
zł71.60
24h
Available quantity: 2
Available
One year extended update/support period for source codes
zł5,296.39
1 weeks
No product available!
Photoelectric liquid level sensor FS-IR02 in a set with a Gravity adapter. DFRobot SEN0205
zł36.72
24h
Available quantity: 3
Available
Module with a button, LED diode and a red cap. DFRobot DFR0029-R
zł7.52
24h
Available quantity: 4
Available
The module is compatible with the Grove Base Shield and designed to implement a wireless serial connection. It uses Bluetooth 4.0 (BLE) HM-11 and UART communication. Seeed Studio 113020008
zł137.11
24h
Available quantity: 3
Available
STM32 Nucleo-32 development board with STM32F303K8T6 MCU, supports Arduino connectivity
zł48.99
24h
Available quantity: 7
Available
The STM32 Nucleo-32 boards provide an affordable and flexible way for users to try out new concepts and build prototypes with the STM32 microcontrollers, choosing from various combinations of performance, power consumption and features
zł58.89
24h
Available quantity: 1
Available
Module with a gas concentration sensor MQ2, which enables the detection of LPG, butane, propane, methane, alcohol, hydrogen and smoke. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020055
zł34.92
4 weeks
No product available!
Evaluation kit with Sparkfun Artemis Bluetooth 5.0 module designed on the basis of the Feather kit. It has a USB C. The board also has a USB-UART converter, a microphone and a JTAG debugging connector. Artemis has support in the Arduino IDE. SparkFun WRL-15574
zł123.89
24h
Available quantity: 1
Available
Module with an analog sound intensity sensor. It enables measurement in the range from 30 dB to 130 dB with a measurement error of ± 1.5 dB. The module returns the output voltage in the range of 0.6 to 2.6 V. DFRobot SEN0232
zł181.34
4 weeks
No product available!
Module with WiFi and BLE Espressif ESP32-S3. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5323
zł95.28
24h
Available quantity: 2
Available
Expansion board with LCD TFT 2.2" display for STM32 Nucleo-144 sets. Equipped with SPI NOR Flash 64Mbit memory for storing images and a joystick for GUI navigation. STMicroelectronics X-NUCLEO-GFX02Z1