- Out-of-Stock
NUCLEO-H745ZI-Q - development board with STM32H745ZI microcontroller
ID: 576189
Development board with ST Zio and ST morpho connectors, based on the STM32H745ZI microcontroller. Thanks to the embedded STLINK-V3 programmer, it is possible to program and debug the microcontroller via USB. STMicroelectronics NUCLEO-H745ZI-Q
Description
STM32 Nucleo-144 is a series of boards with STM32 microcontrollers in LQFP144 packages. The boards are equipped with ST Zio connector, which is a development of the connector known from Arduino boards. Nucleo-144 boards are equipped with an embedded STLINK-V3 debugger, libraries and examples are available for them. STM32 Nucleo-144 provide users with an affordable and flexible way to try new concepts and prototype designs, choosing from various combinations of performance and energy consumption features provided by the STM32 microcontroller.
Features
- STM32H745ZI microcontroller in the LQFP144 package
- ARM Cortex M7 32-bit, ARM Cortex M4
- Frequency 480 MHz
- Flash 2 MB
- RAM 1 MB
- Power supply via ST-LINK USB VBUS connector or from an external source
- USB OTG interface and USB device, mirco-USB connector
- Ethernet RJ-45 connector
- 3 user LEDs
- Two buttons: user, reset
- 32.768 kHz quartz
- Two types of expansion connectors:
- ST Zio - development of the connector known from Arduino Uno R3 with additional I/O lines
- ST morpho - connector with all STM32 microcontroller lines derived
- Embedded STLINK-V3 debugger with SWD connector
- USB re-enumeration capability. Three USB interface modes: virtual COM port, mass storage, debugger
- Possibility to use debugger to work with other boards with STM32 microcontroller
- HAL libraries and examples
576189
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The STM32 Nucleo-144 boards provide an affordable and flexible way for users to try out new concepts and build prototypes by choosing from the various combinations of performance and power consumption features, provided by the STM32 microcontroller. For the compatible boards, the SMPS significantly reduces power consumption in Run mode.
zł106.52
24h
Available quantity: 1
Available
Development board with ST Zio and ST morpho connectors, based on the STM32H755ZI microcontroller. Thanks to the embedded STLINK-V3 programmer, it is possible to program and debug the microcontroller via USB. STMicroelectronics NUCLEO-H755ZI-Q
zł173.76
Delivery date unknown
No product available!
Development board with ST Zio and ST morpho connectors, based on the STM32H753ZI microcontroller. Thanks to the embedded STLINK-V3 programmer, it is possible to program and debug the microcontroller via USB. STMicroelectronics NUCLEO-H753ZI
zł152.31
Delivery date unknown
No product available!
Other products in the same category (16)
The grapple is used for precise operations when replacing SMD and BGA circuits. It allows you to lift small electronic components without using tweezers
Retired
No product available!
Spray CLEANSER PCC 15 with a capacity of 150ml, with a brush is a reliable solution for cleaning printed circuit boards and soldering residues. MICROCHIP
Retired
No product available!
Spray CLEANSER PCC 15 with a capacity of 400ml, with a brush is a reliable solution for cleaning printed circuit boards and soldering residues. MICROCHIP
Retired
No product available!
No product available!
Dispensing needle for precise application of glue, flux with an inner diameter of 0.62mm and an external diameter of 0.9mm.
Retired
No product available!
Dosing needle for precise application of glue, flux with an inner diameter of 0.25 mm and an external diameter of 0.51 mm
Retired
No product available!
No product available!
Dosing needle for precise application of glue, flux with an inner diameter of 0.51mm and an external diameter of 0.82mm
Retired
No product available!
Dosing needle for precise application of glue, flux with an inner diameter of 0.9mm and an external diameter of 1.2mm
Retired
No product available!
Dispensing needle bent, for precise application of glue, flux with an inner diameter of 0.25 mm and an external diameter of 0.5 mm
Retired
No product available!
Folded bending needle, for precise glue application, flux with 0.51mm internal diameter and 0.8mm outside diameter
Retired
No product available!
Needle bending needle, for precise glue application, Flux 0.81mm internal diameter and 1.26mm outside diameter
Retired
No product available!
Thermopad, two-side thermo-adhesive tape, 20mm x 130mm x 1mm, 6W / mK, AG Thermopiles, RoHS
Retired
No product available!
Thermopad, double-sided adhesive, 20mm x 130mm x 2mm, 2.4W / mK, AG Thermopanes, RoHS
Retired
No product available!
Thermopad, thermo-adhesive tape, double-sided adhesive 20mm x 130mm x 1mm, 2.4W / mK, AG Thermopiles, RoHS
Retired
No product available!
Display with 7 "TFT LCD touch screen for Odroid C0, C1, C1 +, C2, Xu3 and XU4 computers The display has an HDMI interface for displaying images and USB for a touch screen resolution 1024x600 pixels
Retired
No product available!
Development board with ST Zio and ST morpho connectors, based on the STM32H745ZI microcontroller. Thanks to the embedded STLINK-V3 programmer, it is possible to program and debug the microcontroller via USB. STMicroelectronics NUCLEO-H745ZI-Q