Wide-Angle OV5640 Camera Module for Raspberry Pi Pico
ID: 1191533
5906623495337
zł137.69
Tax included
zł111.94 tax excl.
High-quality OV5640 camera with a 5 MP sensor, 120° wide-angle lens, and support circuitry, ready to work with Pico or Pico W. Adafruit 5949
Description
High-quality OV5640 camera with a 5-megapixel sensor and a 120° wide-angle lens. This module is an ideal solution for photography and image analysis using Pico or Pico W boards. It allows capturing uncompressed RGB images for advanced analysis or utilizing built-in JPEG encoding for convenient image storage on an SD card or uploading to the adafruit.io platform.
The module uses a fast DVP parallel interface for communication with the RP2040 processor. The camera sensors support an 8-bit image data interface, Pixel Clock, H Sync, and V Sync signals, as well as configuration via the I2C interface. Additional Reset and Power Down pins enable easy control from the microcontroller.
Thanks to its compact dimensions and universal interface, the OV5640 camera is an excellent choice for IoT projects, monitoring, image analysis, and other applications requiring high-quality image capture.
Features
- Sensor: 1/4” Sony CMOS OV5640
- Resolution: 5 MP (2592x1944)
- Pixels: 1.4 µm x 1.4 µm with OmniBSI technology, high sensitivity, low noise
- Field of View (FOV): 120°
- SCCB Interface: Compatible with I2C for configuration
- 8-bit DVP Parallel Interface: For data transfer
- Additional Features: SD card slot, shutter button, STEMMA QT port
- Dimensions: 53.0 x 20.3 x 7.1 mm
- Compatibility: Raspberry Pi Pico
1191533
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Raspberry Pi Pico
zł19.31
24h
Available quantity: 355
Available
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Version with soldered connectors. Raspberry Pi SC0917
zł23.90
24h
Available quantity: 276
Available
Raspberry Pi Pico 2, based on the RP2350 microcontroller, using the application and functional applications of the Cortex M33 and RISC-V cores, doubled SRAM memory and advanced security function, including Arm TrustZone. It is hardware and software with a connected model, which provides an attractive operation for enthusiasts and specialists in systems used
zł24.50
24h
Available quantity: 1217
Available
Raspberry Pi Pico 2W, based on the RP2350 microcontroller and has a built-in WiFi and Bluetooth communication module. Pi Pico 2W offers significantly increased performance and functionality thanks to the use of Cortex M33 and RISC-V cores, doubled SRAM memory and advanced security features, including Arm TrustZone. It is hardware and software compatible with previous models, making it an attractive choice for enthusiasts and professionals in the field of embedded systems
zł32.90
24h
Available quantity: 792
Available
Other products in the same category (16)
Module for 4 mechanical buttons with LED backlight in the form of NeoPixel diodes. Communicates via I2C. Adafruit 4980
zł53.41
24h
Available quantity: 2
Available
Module with a GPS receiver based on the MTK3333 chip. It is equipped with a STEMMA QT connector and communicates via the UART or I2C interface. Adafruit 4415
zł180.63
24h
Available quantity: 3
Available
Hub with Qwiic connectors that allows you to connect several boards to the evaluation kit. There is no built-in control system, but only splits one connector into 3 more. SparkFun BOB-18012
zł10.50
24h
Available quantity: 3
Available
Clock signal generator with a frequency of 8 kHz to 160 MHz based on the SI5351A integrated circuit. Communication with the module takes place via the I2C bus. Adafruit 5640
zł41.21
24h
Available quantity: 5
Available
Module with a 1.5" black and white OLED display with a resolution of 128x128. Offers 16 gray levels and communicates via the I2C or SPI interface. Adafruit 4741
zł117.06
24h
Available quantity: 1
Available
Module with black and white OLED display, 0.96" diagonal and 128x64 px resolution. Equipped with STEMMA QT connector, communicates via I2C or SPI interface. Adafruit 326
zł99.88
24h
Available quantity: 2
Available
Module with CO2, temperature and humidity sensor SCD-41. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5190
zł486.45
24h
Available quantity: 1
Available
Module with digital barometer BMP388. It measures pressure in the range from 300 to 1250 hPa and communicates via I2C or SPI. Adafruit 3966
zł50.63
24h
Available quantity: 1
Available
Module with acceleration and rotational speed sensor based on the LSM6DSOX system. Equipped with a STEMMA QT connector, it communicates via the I2C or SPI interface. Adafruit 4438
zł62.04
4 weeks
No product available!
Module with a 10-channel AS7341 sensor that detects light in various wavelength ranges (color detection). It communicates via the I2C interface. Adafruit 4698
zł94.62
24h
Available quantity: 4
Available
Module with a 3-axis magnetic field sensor MMC5603. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5579
zł30.90
24h
Available quantity: 7
Available
Expansion module (output expander) dedicated to the Circuit Playground Express board. Controlled by the I2C interface, it provides an IO interface, PWM, audio outputs, LED driver, DC motors and a Darlington circuit. Adafruit 3093
zł166.86
24h
Available quantity: 1
Available
Module with a 16-channel GPIO expander with the ability to control LEDs. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4886
zł26.96
24h
Available quantity: 4
Available
Module with an RFID tag based on the ST25DV16K chip. It can be reprogrammed via the I2C bus. Equipped with STEMMA QT connector and PCB antenna. Adafruit 4701
zł19.91
4 weeks
No product available!
Module with proximity and ambient light sensor based on the VCNL4020 system. It allows you to detect obstacles in the range from 0 to 20 cm and measure light intensity from 0.26 to 16,000 lux. It communicates via the I2C bus. Adafruit 5810
zł36.85
24h
Available quantity: 3
Available
Module with a temperature and humidity sensor based on the SHT31-D system. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 2857
zł80.49
24h
Available quantity: 1
Available
High-quality OV5640 camera with a 5 MP sensor, 120° wide-angle lens, and support circuitry, ready to work with Pico or Pico W. Adafruit 5949