Miniature stepper motor - bipolar, 200 steps/rev, 6.3V, 0.3A (double shaft)
ID: 210490
zł642.32
Tax included
zł522.21 tax excl.
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step) with a double shaft, a rated voltage of 6.3V, and draws a current of 0.3A per coil. Pololu 2294
Description
Bipolar stepper motor with a resolution of 200 steps/revolution (1.8° per step) with double-sided shaft. It is supplied with the voltage of 6.3 V, while the current consumption is a maximum of 0.3 A per coil. It has a moment holding 66 g-cm. The cord is not terminated with any plug.
Features
- Resolution: 200 steps/rev. (1.8° per step)
- Current consumption per coil: 0.3 A
- Rated voltage: 6.3V
- The holding moment: 66 g-cm
- Coil resistance: 21 Ω (per coil)
- Winding inductance: 4.2 mH per coil
- Shaft diameter: 4 mm
- Shaft type: round
- Dimensions: 14 x 30 mm
- Cable length: 30 cm
- Weight: 28 g
210490
Data sheet
- Shaft diameter
- 4 mm
- Resolution
- 200 step/rev
- Torque
- 66 g-cm
- Coil resistance
- 21 Ω
- Coil current
- 300 mA
- Inductance of the coil
- 4,2 mH
- Voltage
- 6,3 V
- Weight
- 28 g
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
DRV8834 Low-Voltage Stepper Motor Driver Carrier
zł43.43
24h
Available quantity: 3
Available
Copper alloy traveling nut intended for use with Tr8×8(P2) threaded rods and features a mounting flange with four holes threaded for M3 screws. Pololu 2688
zł41.05
24h
Available quantity: 1
Available
A4988 Stepper Motor Driver Carrier with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. Pololu 2981
zł47.48
24h
Available quantity: 2
Available
Tic T500 USB Multi-Interface Stepper Motor Controller
zł134.39
24h
Available quantity: 1
Available
STSPIN220 stepper motor driver module with a low voltage range of 1.8...10V and 1.1A working current. The controller allows you to control the motor motion up to 9 different resolutions (up to 1/256 steps). Pololu 2877
zł49.21
24h
Available quantity: 1
Available
Other products in the same category (16)
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8 ° per step), has a nominal voltage of 7.4 V, and draws a current of 0.28 A per coil. Pololu 1207
zł163.48
24h
Available quantity: 1
Available
NEMA34 bipolar stepper motor. It has a resolution of 200 steps/rotation (1.8° per step), a voltage rating of 2.6 V and draws a current of 5 A per coil. 86A8S4-14
zł451.69
4 weeks
No product available!
Bipolar stepper motor powered with a voltage of up to 12 V and a maximum current of 400 mA. SparkFun ROB-10551
zł80.18
24h
Available quantity: 2
Available
Miniature stepper motor with a 100:1 metal gear offers high precision movement and increased torque, making it a suitable choice for projects requiring precise positioning, such as mobile robots, dispensing mechanisms or laboratory devices. The compact design and wide supply voltage range enable integration in complex mechatronic systems. DFRobot FIT0503
zł28.25
24h
Available quantity: 1
Available
Unipolar/bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 3.2 V, and draws a current of 2.8 A per coil. Pololu 1478
zł546.59
4 weeks
No product available!
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 10 V, and draws a current of 0.5 A per coil. Pololu 1208
zł163.48
24h
Available quantity: 3
Available
This NEMA 17-size hybrid bipolar stepping motor has an integrated 28 cm (11″) threaded rod as its output shaft, turning it into a linear actuator capable of precision open-loop positioning. The stepper motor has a 1.8° step angle (200 steps/revolution) and each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in). Pololu 2268
zł534.89
4 weeks
No product available!
NEMA23 bipolar/unipolar stepper motor. It has a resolution of 200 steps/rotation (1.8° per step), a voltage rating of 36 V and draws a current of 5.6 A per coil. 57HS22
zł190.65
24h
Available quantity: 1
Available
NEMA17 bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 12 V and draws a current of 1.8 A per coil. 17HS8401B
zł65.19
4 weeks
No product available!
NEMA23 bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 12 V and draws a current of 2.8 A per coil. 57BYGH76
zł134.02
4 weeks
No product available!
Unipolar/bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 3.6V, and draws a current of 2A per coil. Pololu 1473
zł376.42
4 weeks
No product available!
NEMA17 bipolar stepper motor. It has a resolution of 200 steps/rotation (1.8° per step), a voltage rating of 4.1 V and draws a current of 0.7 A per coil. 17HS4023
zł43.85
4 weeks
No product available!
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 12 V and draws a current of 0.4 A per coil. 42BYGHW208
zł48.30
4 weeks
No product available!
NEMA17 bipolar stepper motor included with a 300 mm long T8 trapezoidal screw. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 2.4 V and a current consumption of 1.5 A per coil. 17HD40005-300N
zł172.75
4 weeks
No product available!
Unipolar/bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a nominal voltage of 5.7 V, and has a current consumption of 1 A per coil. Pololu 1476
zł304.18
24h
Available quantity: 1
Available
A set consisting of a stepper motor driver module based on the ULN2003 system and a stepper motor powered with 5V voltage.
zł12.85
Delivery date unknown
No product available!
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step) with a double shaft, a rated voltage of 6.3V, and draws a current of 0.3A per coil. Pololu 2294