WEP 878D - 2-in-1 hotair soldering station + soldering iron
ID: 578812
zł333.32
Tax included
zł270.99 tax excl.
WEP 878D soldering station is a station with hot air soldering iron (hotair) and 50W soldering iron. It is used in electronic services for safe soldering QFP, BGA, SMD, PLCC and other temperature sensitive components. WEP 878D
Description
WEP 878D soldering iron is a soldering station with a hot air soldering iron (hotair) and a soldering iron. It has an LED display on which the temperature for hot air is displayed, temperature control by means of buttons and blowing power by means of a knob. The temperature in the soldering iron is controlled by a knob. It has a sensor in the stock stand, thanks to which, after putting the stock on the stand, the station cools the heating element for 3 to 8 minutes, then turns it off (standby).
Thanks to this, we save energy, extend the life of the heater and increase work safety. Stable and efficient air discharge is provided by the fan located in the flask. The fan is driven by a brushless motor, ensuring much higher durability and reliability of the device.
Features
- Soldering station:
- Solid and ergonomic housing
- The processor control high stability of work, an extension of heating elements life, energy saving
- Wakefulness
- The memory of the last set temperature
- Power supply: 230 V
- Station power: 700 W
- Hotair
- Hot air temperature control from 100-480°C
- Temperature stability: ± 1°C
- LED display
- Temperature setting using buttons,
- Smooth regulation of airflow by means of buttons,
- Fan-generated blow
- Airflow up to 120 liters/minute [max]
- Size of the hot air outlet head 22 mm (All nozzles from PT/Aoyue stations fit)
- Tip soldering iron:
- Tip temperature adjustment from 200-480 °C
- Temperature stability ± 2 °C
- Soldering iron power: 50 W
- LED indicator
- 1m cable
- ESD Safe
- The potential between tip and ground: < 2 mV
Included
- 878D soldering station
- Hotair stand
- Round nozzles with 7 mm and 9 mm diameters and 12 x 12 mm square
- Stand under the tip with a cleaning sponge
- 907A tip stock with T-I tip
- Gripper for lifting systems
578812
Data sheet
- Station type
- 2in1 (tip soldering iron + hotair)
- Tip soldering iron temperature
- 200 - 480 °C
- HotAir temperature
- 100 - 480 °C
- Power
- 50W
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The most popular Sn60Pb40 SW26 solder is a high-quality lead product with SW26 flux, intended for professional soldering in electronics and electrical engineering, meeting the EN ISO 9453:2014 standard
zł4.31
24h
Available quantity: 298
Available
RF800 flux is a medium-active rosin solution that does not require washing. AG Termopasty ART.AGT-042
zł4.66
24h
Available quantity: 53
Available
Rosin for soldering with addition of activators, thanks to which this rosin has activity similar to solder paste. The packaging contains 40g of flux. AG Termopasty ART.AGT-034
zł4.43
24h
Available quantity: 28
Available
Contact IPA Plus contains high purity isopropyl alcohol. Removes all contamination from optical elements. Leaves no traces or stains. AG Termopasty ART.AGT-001
zł4.69
24h
Available quantity: 20
Available
The universal stand protects against accidental thermal damage of various items during soldering. NAR0034
zł8.93
Delivery date unknown
No product available!
A stand for a soldering iron with a cleaning system made of brass chips for soldering tips
zł34.19
24h
Available quantity: 3
Available
Sponge necessary during soldering, removes tin residues and dirt from the tip. Dimensions 35x50mm
zł2.30
24h
Available quantity: 5
Available
Other products in the same category (16)
2-in-1 soldering station with a power of 700 W with a hot air soldering iron and a tip soldering iron. Equipped with an LCD display, controlled by potentiometers. WEP 706
zł319.44
24h
Available quantity: 1
Available
WEP 968DB + is a hot air soldering station and a tip soldering iron with a peak power of 70 W with fume extraction from under the tip. It is used for soldering of electronic components, shrinking, welding of plastics, heating. The station is equipped with a SAMSUNG microprocessor that checks the operating parameters of the station and corrects them to the set values. WEP 968DB+
zł507.05
1 weeks
No product available!
Soldering station 5 in 1: hotair (100-480 deg. C), soldering tip 60W, service power supply 0-15V / 1A, RF signal tester and voltage meter. Included, among others set of nozzles and gripper for integrated circuits
zł509.58
24h
Available quantity: 1
Available
Soldering station with soldering iron, LED lamp and magnifying glass. Station power 130 W. YIHUA 926
zł155.91
24h
Available quantity: 1
Available
soldering iron WEP 992DA + is a hot air soldering station and a soldering iron. It is equipped with a PID microprocessor, used for soldering and desoldering electronic components, shrinking, welding plastics, heating. WEP 992DA + 3in1
zł1,159.73
24h
Available quantity: 2
Available
The WEP 937D soldering tip station has smooth temperature control in the range from 200 ° C to 480 ° C. Thanks to the built-in temperature sensor in the heater and LED display, you can set the desired temperature very precisely. WEP 937D
zł175.50
24h
Available quantity: 1
Available
Soldering station with a ceramic heating element with a capacity of 45W, temperature 200.40 ° C
zł112.00
24h
Available quantity: 1
Available
WEP 938D + double soldering iron with a special flask stand, temperature range 100-480C, LCD display.
zł460.78
24h
Available quantity: 2
Available
Soldering station WEP 937D + with smoothly adjustable temperature in the range from 200 to 480 ° C, temperature sensor and LED display.
zł185.72
1 weeks
No product available!
Soldering station 2 in 1 for hot air and arrowhead. With original Japanese heating elements Hakko and PID controller correcting the temperature on an ongoing basis.
zł609.59
24h
Available quantity: 1
Available
3in1 soldering station connecting hot air soldering iron, soldering iron and heater. Station with a power of 1270 W. Excellent for dismantling SMD and BGA systems. YIHUA 853AAA
zł907.78
24h
Available quantity: 1
Available
5W1 soldering station with 800 W power: Hotair, soldering iron, service power supply 0-15V/1A, RF signal tester and voltage meter. The set includes a set of nozzles and a gripper for integrated circuits. YIHUA 853D
zł511.68
1 weeks
No product available!
The WEP 995D soldering station is a station consisting of a hot air soldering iron and a tip soldering iron (75 W). It has a PID controller, LCD display, adjustable temperature and air blow out provided by the fan located in the flask. It is used for soldering and desoldering electronic components such as: SOIC, CHIP, QFP, PLCC, BGA, SMD. WEP 995D
zł573.76
1 weeks
No product available!
The WEP 952D+ soldering station is equipped with a 640 W hotair , 60 W tip, and a compressor. It combines simple operation and a very long life, it is perfectly suited to work in small services, homes, workshops.WEP 952D+
zł249.00
1 weeks
No product available!
2in1 soldering station with hot air soldering iron and soldering tip. 700 W power station. Equipped with an LCD display, controlled by potentiometers. YIHUA 872D
zł416.97
1 weeks
No product available!
No product available!
WEP 878D soldering station is a station with hot air soldering iron (hotair) and 50W soldering iron. It is used in electronic services for safe soldering QFP, BGA, SMD, PLCC and other temperature sensitive components. WEP 878D