Category: STARTER KITS, PROGRAMMERS, MODULES

Module with liquid turbidity sensor. The board is equipped with a Grove connector and communicates via a digital or analog interface. Seeed Studio 101020752

Module with a digital temperature sensor PCT2075. It enables measurement in the range from -25 to 100°C with an accuracy of ±1°C. Communicates via I2C. Adafruit 4369

Espressif ESP32-S3 WiFi and Bluetooth LE module board. It offers 16 MB of flash memory and 2 MB of SRAM. The pinouts are compatible with the HAT modules for the Raspberry Pi Pico. Waveshare ESP32-S3-Pico-M

Module with a GPS receiver based on the MTK3333 chip. It is equipped with a STEMMA QT connector and communicates via the UART or I2C interface. Adafruit 4415

Module with digital barometer BMP388. It measures pressure in the range from 300 to 1250 hPa and communicates via I2C or SPI. Adafruit 3966

The module with the MCP96L01 amplifier designed to work with a thermocouple type K, J, T, N, S, E, B, or R. It has a screw connection for connecting a thermocouple and communicates via I2C. Adafruit 5165

A development board that uses the ESP32-C3 chip based on the RISC-V architecture. It has built-in 400 KB of SRAM and 4 MB of Flash memory and a clock frequency of 160 MHz. Pro Micro offers a Qwiic connector that allows you to connect any sensor that communicates via the I2C bus. SparkFun DEV-23484

Flexible 4-core cable, 500 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17257

Non-contact liquid level sensor with Gravity interface. It allows you to detect the level of liquid in non-metallic containers. DFRobot SEN0485

Multifunctional micro:bit expansion module with built-in Li-Ion battery. The board is equipped with a two-channel DC motor driver, 9 IO pins, I2C, UART interface, buzzer, 4 RGB LEDs and a charging circuit. DFRobot MBT0005

J-Link 19-pin Cortex-M Adapter, RoHS, Segger

The STEVAL-MKI079V1 board enables demonstration and testing of the dual-axis LPR430AL gyroscope in analog or digital mode. The built-in microcontroller and USB interface facilitate signal analysis and the development of MEMS sensor-based applications in measurement and control systems.

ESP32-S3R8 microcontroller development board featuring a 3.16-inch 320x820 color LCD display with an ST7701 controller. It offers 2.4GHz Wi-Fi and Bluetooth 5 connectivity, 16MB of Flash, and 8MB of PSRAM for high performance and support for rich graphics interfaces (LVGL). Onboard features include a QMI8658 motion sensor (6-axis IMU), a PCF85063 RTC, a microSD slot, UART/I2C/USB connectors, a 3.7V battery connector with charging, and a USB Type-C port. Waveshare ESP32-S3-LCD-3.16

UNIHIKER K10 is a comprehensive AI educational board featuring an ESP32-S3, wireless connectivity, and a set of built-in sensors, designed for learning visual programming and exploring AI. It enables rapid development of projects involving computer vision, voice control, and IoT communication – ideal for educational use and prototyping.

WiFi module with ESP8266 designed to work with the Raspberry Pi Pico. It communicates via the UART interface using AT commands. Waveshare Pico-ESP8266

Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi, BLE and LoRa communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993070

Module with a button and re LED backlight. Controlled by the I2C interface, it has a built-in debouncing mechanism, pull-up resistors as well as interrupts and a FIFO queue. SparkFun BOB-15932

ESP32-S3-Touch-AMOLED-1.75 is a standard ESP32-S3 development board with an AMOLED display, touch, microphones, sensors, and Wi-Fi/Bluetooth support. It is suitable for building compact IoT and HMI devices where touch interaction, wireless communication, and audio support are essential.

Expansion board for STM32 Nucleo enabling output support in the industry standard. It allows you to control eight galvanically isolated outputs as relays. It has a connector compatible with Arduino® UNO R3. STMicroelectronics X-NUCLEO-OUT02A1

The module is based on the GD32E103 microcontroller, supporting CAN FD at up to 5 Mbps, making it ideal for automotive and automation applications. With AT command support, Grove connector and compatibility with XIAO RP2040 boards, the module offers easy integration in IoT projects such as monitoring or automation. Seeed Studio 114992978