Category: STARTER KITS, PROGRAMMERS, MODULES

Test board for testing the emFile NAND controller and compatible memory devices. The base module with the STM32H743 microcontroller works with interchangeable adapters supporting different NAND Flash packages, providing flexibility in testing. Segger NAND Flash Evaluator (6.20.12)

The ESP32-S3-BOX-3 is a development kit based on the ESP32-S3 SoC, ideal for creating AIoT, Edge AI, and IIoT applications. The ESP32-S3-WROOM-1 module supports WiFi 802.11 b/g/n (2.4 GHz) and Bluetooth 5.0, features 36 configurable GPIO pins, and includes a PCB antenna. It operates within a temperature range of -40 to +85°C with a supply voltage of 3.0 - 3.6V. The kit supports software solutions like ESP-BOX, ESP-SR, ESP-RainMaker, and ESP-Matter, facilitating the development of advanced IoT systems. ESP32-S3-BOX-3

Programmable IoT module for voice control and audio interaction projects, based on ESP32-S3 with Wi-Fi2.4GHz, 8MB Flash and 8MB PSRAM, featuring audio codec, MEMS microphone and audio amplifier. M5Stack C126-ECHO

Development board featuring the ESP32-C6 (32-bit RISC-V up to 160 MHz), equipped with a 1.14″ IPS color LCD (240 × 135 px), 2.4 GHz Wi-Fi 6, and Bluetooth 5 (LE). Includes 16 MB Flash, TF card slot, USB-A port, and GPIO, UART, and I2C headers. Designed for IoT projects, wireless applications, and programming education. Waveshare ESP32-C6-GEEK

Development board based on the ESP32-S3-WROOM module with a dual-core 240 MHz processor, 32 MB Flash and 16 MB PSRAM, supporting 2.4 GHz Wi-Fi and Bluetooth LE, designed for IoT and AIoT projects. Waveshare ESP32-S3-DEV-KIT-N32R16V

One-year extension of support and updates for the Embedded Studio Cortex-M 20.00.23 license. Users gain access to the latest versions, bug fixes, and technical support, ensuring the stability and performance of the development environment. Segger Embedded Studio Cortex-M edition extension (20.20.23)

An adapter that allows you to connect a 20-pin 0.1" connector to a 10-pin connector, allowing you to easily connect J-Link or Flasher programmers to your PCB using through-wires. It is ideal for prototyping, testing new designs and working with ST Discovery boards, offering flexibility, speed and time savings when making design changes.Segger Flying Wire Adapter (06.08.27)

Extension of support and updates for SystemView for an additional year, available to owners of an active 8.50.00 license. Thanks to this, users gain access to the latest versions, patches and technical support, which ensures stability and continuity of work. Segger SystemView extension (8.50.02)

Module with NEO-F9P GNSS receiver. It allows you to track signals from several satellite systems, including GPS, GLONASS, Galileo and Beidou, and offers accuracy of up to 10 mm using an RTK base station. It offers five communication ports: USB type C, UART1, UART2 for RTCM, I2C and SPI reception and Qwiic connectors. SparkFun GPS-23288

Development board based on the ESP32-S3 microcontroller, featuring a round 1.32-inch AMOLED capacitive touch display with a resolution of 466 × 466, support for 2.4 GHz Wi-Fi and Bluetooth 5 LE, as well as audio circuitry and expansion interfaces. Designed for wearable projects, user interfaces, IoT applications, and voice interaction solutions. ESP32-S3-Touch-AMOLED-1.32

Adapter that enables JTAG connection between Flasher programmer and target hardware with Power Architecture or PowerPC microcontrollers. Converts 20-pin 0.1\'\' connector to 14-pin JTAG, ensuring compatibility, stability and secure connection. Segger PPC 14-Pin Adapter (06.08.07)

A shield designed to collect data from the MyoWare 2.0 Muscle Sensor and transmit it wirelessly using the ESP32-WROOM module. Equipped with a built-in 40 mAh LiPo battery. SparkFun DEV-23387

Espressif ESP32-C6 WiFi module board with RISC-V core. It offers 4 MB Flash memory and 512 kB SRAM and RGB diode. It has a built-in ceramic WiFi/BLE antenna. Version with soldered connectors. Waveshare ESP32-C6-Zero-M

A 1:1 adapter that allows you to connect a standard 20-pin connector to its 2mm pitch counterpart without any additional configuration. For some models, such as the J-Link PRO, pins 14, 16, 18 and 20 may not be connected to ground, so it is recommended to leave them unconnected on the target hardware. Segger 2mm Adapter (06/08/11)

Xilinx adapter that connects to Xilinx\'s 14-pin, 2mm JTAG connector, providing debugging of MCU cores such as the Arm Cortex-A9 on Xilinx Zynq FPGAs. With its compact design and high signal quality, it is a reliable tool for engineers working with FPGA platforms. Segger Xilinx Adapter (06/08/19)

The adapter is designed to support a wide range of RL78 microprocessor cores manufactured by Renesas, such as the RL78/D1A, RL78/F12, RL78/F13, RL78/F14, RL78/F15, and the RL78/G and RL78/I series. The adapter enables quick and easy connection to target devices, providing full flash programming functionality, making it a versatile tool for industrial and embedded applications. Segger RL78 Adapter (06/08/20)