Magnetic cable Akyga AK-USB-47 is a practical tool for charging and data transmission in devices with a micro USB B connector. Thanks to the magnetic mechanism, it ensures convenient handling and effective protection of the socket from dirt and wear. The ability to replace the tip with a different type of connector makes the cable a successful substitute for several different cables, especially when traveling or during everyday use. Ideal for smartphones, tablets, and small consumer electronics.

DS3231 Precision RTC FeatherWing adds an extremely accurate I2C-integrated Real Time Clock (RTC) with a Temperature Compensated Crystal Oscillator (TCXO) to any Feather main board. Adafruit 3028

ARM® Cortex®-M4 32b MCU+FPU, 125 DMIPS, 512KB Flash, 128KB RAM, USB OTG FS, 11 TIMs, 1 ADC, 13, LQFP100, STM, RoHS

Data logger dedicated to Feather plates. Equipped with RTC clock, battery slot and micro SD card slot. Adafruit 2922

Graphic display 192x64 with LED backlight (Amber)

Module with a black and white OLED display with a diagonal of 0.5" and a resolution of 60x32 pixels. It can be directly plugged into the Arduino Micro board. DFRobot DFR0376

OS Preinstalled Flash Memory for ODROID-C2 with Android

The Pololu Pushbutton Power Switches are sophisticated power control alternatives to bulky mechanical switches. The main function is pushbutton-based latching power control, where one push turns on power and another push turns it off.

Compact stepper motor controller with the TMC2208 system with operating voltage from 4 to 35 V. It offers smooth, quiet operation, high efficiency, various operating modes and easy configuration. It is controlled via the STEP/DIR interface and is an ideal solution for 3D printers and similar applications

Flat USB cable A - micro-B USB with a length of 1 m, cable in a dark pink color

Set with a measuring module and a probe for measuring electrical conductivity. It allows you to measure the salinity of water and soil. It has a Gravity analog output interface. DFRobot DFR0300

BMS protection circuit designed for 4 Li-Ion cells. It has a charging function with balancer option, a discharging function and an over-discharge protection function. HXYP-C47-MA18-4S

C/CS mount lens with adapter. Allows a zoom of up to 100X, making it suitable as a microscope lens. Designed for use with the Raspberry Pi HQ camera. Waveshare 100X Microscope Lens for Pi

FeatherWing Doubler is a shield that allows you to create your own layout based on two or one Feather series. The plate has 256 holes, including designated, common solder points for supply voltages. Adafruit 2890

Large momentary button with a diameter of 100 mm with LED backlight. It was based on a limit switch. The housing is black

Module with a temperature and humidity sensor based on the SHT31-D system. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 2857

This is the FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top of your Feather board and let the board take flight. Adafruit 2900

Snap-Action Switch with 16.3mm Roller Lever: 3-Pin, SPDT, 5A

This module enables the Feather series range to be expanded with 8 12-bit PWM outputs that can be used, for example, to control servos or LED diodes. Adafruit 2928