Module with 5 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4205

This compact (0.4″ × 0.5″) switching step-down (or buck) voltage regulator takes input voltages up to 50 V and efficiently reduces them to 9 V while allowing for a maximum output current of 600 mA. It has a very low dropout, so it can be used with input voltages that are within a few hundred millivolts of its output.

RGB LCD display module with 0.96 "diagonal, 160x80 pixel resolution, SPI interface, LED backlight. Waveshare 15868

COM-13716

A set of 2300 SMD 0805 capacitors with 92 values in a booklet-style organizer provides a wide range of capacitances and rated voltages. It is suitable for prototyping, servicing and production of electronic circuits, enabling quick component selection and organized workflow.

Compact module with three I2C sensors, enabling measurement of temperature, humidity, pressure, light, proximity and motion. It offers two Qw/ST connectors, so you can quickly connect it to Raspberry Pi, Pico or other microcontrollers. Ideal for IoT applications, home automation and environmental analysis in mobile or stationary projects. Pimoroni PIM745

This 3-port HDMI splitter with manual switching allows easy connection of multiple devices to a single HDMI input, supporting up to Full HD 1080p with no need for external power

This add-on board makes it easy to control two high-power DC motors with a Raspberry Pi. Its twin discrete MOSFET H-bridges support a wide 6.5 V to 36 Voperating range and are efficient enough to deliver a continuous 14 A without a heat sink. The drivers offer basic current limiting functionality, and they accept ultrasonic PWM frequencies for quieter operation.

Board for applications in the area of the Internet of Things (IoT). The module is based on the ESP-WROOM-32E system with 240 MHz clock, equipped with 4 MB Flash and 520 KB SRAM, as well as WiFi and Bluetooth communication. DFrobot DFR0654-F

Camera module with USB interface with a resolution of 2MP. Camera with Sony CMOS IMX291 sensor, the module is equipped with two microphones. ArduCAM B0201

Module with a 3-axis motion sensor MSA301 (accelerometer), which allows to measure acceleration in the range of ±2/±4/±8/±16 g. Communicates via the I2C bus. Pimoroni PIM456

4" LCD IPS display with touch screen. The display is equipped with a DPI interface for image display and I2C interface for a touch screen. Resolution 720x720 pixels. Waveshare 4inch DPI LCD (C)

Module with 3 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4243

The Class D digital audio amplifier module has two channels with a power of 15 W and can work with speakers from 4 to 8 Ω. Powered with the voltage ranging from 8 to 26 V. Bluetooth communication

Module with color and light intensity sensor. Offers a wide detection range and two LED backlights. It communicates via the I2C bus. It communicates via the I2C bus. Pimoroni PIM375

Lanberg unshielded Category 6 LSA connector is designed for network installations in environments with standard levels of interference. Compatibility with T568A and T568B wiring schemes and the use of IDC (Insulation Displacement Connector) technology make installation easy and ensure durable connections for copper wires. This product is suitable for LAN infrastructure in homes, offices, and schools, where shielding of the transmission path is not required.

LED adapters that allow easy control of LEDs (dimming, flickering, pulsing) in Tiny FX based projects. They feature AVX 9276 connectors and built-in 33Ω resistors, eliminating the need for soldering and external components. Compact and durable, they are great for models, LEGO® scenes and light decorations. Pimoroni PIM751

Long, flexible, pressure sensor that can be used to implement very sensitive force detection. The sensor is durable and designed to detect static and dynamic pressure at high response speeds. DFRobot SEN0293

A module with eight large buttons (U, D, L, R, A, B, X, Y) and two additional (+, -), ideal as a controller for games and educational projects. It has four built-in white LEDs and two Qw/ST connectors, which allows easy connection without soldering to Raspberry Pi, Pico and other microcontrollers. It supports an I2C interface with a configurable address, allowing the simultaneous use of up to four pads. Pimoroni PIM752

Camera module based on ESP32 integrated with 8 MB of PSRAM. The camera is equipped with an OV3660 sensor with a resolution of 3 MPx and WiFi communication. M5Stack U082-X