Power Cable with Open Tin Akyga AK-OT-01A CCA CEE 7/7 1.5 m

Shielded FTP category 6 Ethernet network cable with RJ45 plugs. Lanberg PCF6-10CC-0500-R

Module with e-Paper display, 5.83" diagonal and 600x448 px resolution. Communication via SPI interface. Waveshare 5.83inch e-Paper HAT (C)

AMOLED 10.5" display with touch panel. It is equipped with HDMI for video display and USB Type-C for the touch panel. It has a resolution of 2560x1600 pixels. It comes with a power adapter. Waveshare 10.5inch HDMI AMOLED (EU)

The GP2Y0A60SZ distance sensor from Sharp offers a wide detection range of 4″ to 60″ (10 cm to 150 cm) and a high update rate of 60 Hz. The distance is indicated by an analog voltage, so only a single analog input is required to interface with the module.

Module with a relay and WiFi communication. Compatible with ESP-01 or ESP-01S

8 Mpx camera module with IMX219 sensor. The camera is intended for use as a replacement on the RPI Camera Board V2. ArduCAM B0180

Module with yellow LED, digitally controlled. Perfect for people starting to play with Arduino. Equipped with a Gravity interface. DFRobot DFR0031-Y

Controller of three-phase BLDC motors based on Trinamic\'s TMC6300 chip. Allows motion control of drives with a current consumption of up to 2 A. SparkFun ROB-21220

Graphical display 128x64 pixels, 92x53.6 mm, extended temperature range, controller: ST7565R

2x16 display with LED backlight (AMBER) FSTN, 80x36 mm, extended temperature range "fast" 2LED backlight, (second character set - CYRIL) v.E31-FIA

Lanberg\'s power distribution unit (PDU), designed for horizontal installation in 19inch server racks, offers a single-phase power input, advanced protections including overload protection and current path shutters, and redundant cable cross-section, which guarantees stable and continuous operation, ideal for professional server environments.

E-ink display for Raspberry Pi with 2.13 "diagonal resolution and 250x122 pixels with SPI controller. DFRobot DFR0591

Module with a temperature and humidity sensor based on the SHT31-D system. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 2857

FeatherWing Doubler is a shield that allows you to create your own layout based on two or one Feather series. The plate has 256 holes, including designated, common solder points for supply voltages. Adafruit 2890

Data logger with LPC2148 chip and microSD card support. The module is equipped with a microUSB connector, Li-Pol battery charger and a microSD card slot. SparkFun WIG-12772